scholarly journals Consumption of wood fuels in households in Serbia: Present state and possible contribution to the climate change mitigation

2011 ◽  
Vol 15 (3) ◽  
pp. 571-585 ◽  
Author(s):  
Branko Glavonjic
Keyword(s):  
Climate Change Mitigation ◽  
Fossil Fuels ◽  
District Heating ◽  
Field Research ◽  
Heating System ◽  
District Heating System ◽  
Software Packages ◽  
Wood Fuels ◽  
Gis Software ◽  
Change Mitigation

The paper presents results of the research in wood fuels consumption for house-hold needs in Serbia. Research was performed during the period from October 2010 until April 2011, i. e. in the period of heating season in order to get the actual situation regarding the presence of certain fuel types in the consumption of households with special highlight on types and amounts of wood fuels. For this purpose, an adequate methodological concept was defined with the aim to primarily get relevant and reliable data on wood fuels consumption and afterwards, by using FAO WISDOM methodology and adequate GIS software packages to perform their analysis, mapping, and graphic representation. One of the most significant elements of the adopted methodological concept was field research-questionnaire of households which was conducted on the sample of 36.946 households out of which 20.725 urban and 16.221 rural in 22 municipalities in Serbia, which was 1.46% of the total number of households in Serbia. Results of the survey showed that 23.2% of the total number of households in Serbia used district heating system (based on conventional fossil fuels as dominant), 25.3% used electricity, and 10.6% used gas for heating purposes. Most households (40.9%) used solid fuels such as fuelwood, coal, briquettes, pellets, agricultural residues and combinations of solid and other fuels.

On the influence of decommissioning an area thermal substation in a district heating system on heat consumption and costs in buildings – Long term field research

2022 ◽  
Vol 50 ◽  
pp. 101870
Author(s):  
Alicja Siuta-Olcha ◽  
Tomasz Cholewa ◽  
Mirosław Gomółka ◽  
Piotr Kołodziej ◽  
Dorte Skaarup Østergaard ◽  
...  
Keyword(s):  
District Heating ◽  
Field Research ◽  
Heating System ◽  
Heat Consumption ◽  
District Heating System ◽  
Term Field

Optimization of a Local District Heating Plant Under Fuel Flexibility and Performance

2011 ◽  
Author(s):  
Souman Rudra ◽  
Lasse Rossendahl ◽  
Niels From
Keyword(s):  
Natural Gas ◽  
Fossil Fuels ◽  
System Analysis ◽  
Reference Model ◽  
District Heating ◽  
Heating System ◽  
Energy System ◽  
District Heating System ◽  
And Performance ◽  
Heating Plant

Brovst is a small district in Denmark. Based on the case of Brovst, this paper analyses the role of district heating in future Renewable Energy Systems. The present use of fossil fuels in the Brovst DHP (district heating plant) represents an increasing environmental and climate-related load. So, an investigation has been made to reduce the use of fossil fuels for district heating system and make use of the local renewable resources (Biogas, Solar and Geothermal) for district heating purpose. In this article, the techno-economic assessment is achieved through the development of a suite of models that are combined to give cost and performance data for this district heating system. Different local fuels have been analyzed for different perspectives to find the way to optimize the whole integrated system in accordance with fuel availability and cost. This paper represents the energy system analysis mode energyPRO which has been used to analyses the integration of large scale energy system into the domestic district heating system. A model of the current work on the basis of information from the plant (using fossil fuel) is established and named as a reference model. Then different solutions are calculated for various local fuels in energyPRO. A comparison has been made between the reference model and the basis for individual solutions. The greatest reduction in heat price is obtained by replacing one engine with a new biogas where heat production is divided by 66% of biogas, 13% natural gas engines and 21% natural gas boilers.

Exergoeconomic Analysis of District Heating Systems

2009 ◽  
Author(s):  
Vittorio Verda ◽  
Serena Fausone
Keyword(s):  
Fossil Fuels ◽  
Probabilistic Approach ◽  
District Heating ◽  
Heating System ◽  
Primary Energy ◽  
Combined Cycle ◽  
District Heating System ◽  
Heating Systems ◽  
District Heating Systems ◽  
Selection Of

District heating is a rational way to use fossil fuels for domestic heating (and cooling) in towns, especially if it is joined to a cogenerative production of electricity. The aim of this paper is to propose the use of exergoeconomic procedures for the design and analysis of district heating systems. Network design basically involves the selection of the areas to be connected to the network as well as the selection of some design variables as the pipe diameters, the location of pumps etc. This choice is operated assuming primary energy consumption as the objective function to be minimized. The application of these concepts is operated through a probabilistic approach derived from Simulated Annealing. An application to the Turin district heating system is presented here. The system is composed of a cogenerative combined cycle, some auxiliary boilers and the pipe network. An exergetic cost is associated to each user or potential user. This information is used to evaluate the opportunities for future expansions of the served area as well as the variation in some of the operating parameters.

scholarly journals Technology Pathways and Economic Analysis for Transforming High Temperature to Low Temperature District Heating Systems

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3218
Author(s):  
Pedro Durán ◽  
Herena Torio ◽  
Patrik Schönfeldt ◽  
Peter Klement ◽  
Benedikt Hanke ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Renewable Energy ◽  
High Temperature ◽  
Low Temperature ◽  
Economic Analysis ◽  
District Heating ◽  
Heating System ◽  
District Heating System ◽  
Heating Systems ◽  
District Heating Systems

There are 1454 district heating systems in Germany. Most of them are fossil based and with high temperature levels, which is neither efficient nor sustainable and needs to be changed for reaching the 2050 climate goals. In this paper, we present a case study for transforming a high to low temperature district heating system which is more suitable for renewable energy supply. With the Carnot Toolbox, a dynamic model of a potential district heating system is simulated and then transformed to a low temperature supply. A sensitivity analysis is carried out to see the system performance in case space constrains restrict the transformation. Finally, an economic comparison is performed. Results show that it is technically possible to perform the transformation until a very low temperature system. The use of decentralized renewable sources, decentralized heat storage tanks and the placement of a heat pump on each building are the key points to achieve the transformation. Regarding the sensitivity analysis, the transformation is worth doing until the seasonal storage and solar collector field sizes are reduced to 60% and 80% of their values in the reference case, respectively. The economic analysis shows, however, that it is hard for highly efficient low temperature renewable based heat networks to compete with district heating systems based on a centralized fossile CHP solution. Thus, though the presented transformation is technically possible, there is a strong need to change existing economic schemes and policies for fostering a stronger promotion of renewable energy policies in the heat sector.

Predicting Hourly Heating Load in a District Heating System Based on a Hybrid CNN-LSTM Model

2021 ◽  
pp. 110998
Author(s):  
Jiancai Song ◽  
Liyi Zhang ◽  
Guixiang Xue ◽  
YunPeng Ma ◽  
Shan Gao ◽  
...  
Keyword(s):  
District Heating ◽  
Heating System ◽  
District Heating System ◽  
Heating Load

scholarly journals Upgrading a District Heating System by Means of the Integration of Modular Heat Pumps, Geothermal Waters, and PVs for Resilient and Sustainable Urban Energy

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2347
Author(s):  
Elżbieta Hałaj ◽  
Jarosław Kotyza ◽  
Marek Hajto ◽  
Grzegorz Pełka ◽  
Wojciech Luboń ◽  
...  
Keyword(s):  
District Heating ◽  
Heating System ◽  
Upper Jurassic ◽  
Heat Pumps ◽  
Water Levels ◽  
Energy Potential ◽  
Geothermal Waters ◽  
District Heating System ◽  
Heating And Cooling ◽  
The City

Krakow has an extensive district heating network, which is approximately 900 km long. It is the second largest city in terms of the number of inhabitants in Poland, resulting in a high demand for energy—for both heating and cooling. The district heating of the city is based on coal. The paper presents the conception of using the available renewable sources to integrate them into the city’s heating system, increasing the flexibility of the system and its decentralization. An innovative solution of the use of hybrid, modular heat pumps with power dependent on the needs of customers in a given location and combining them with geothermal waters and photovoltaics is presented. The potential of deep geothermal waters is based on two reservoirs built of carbonate rocks, namely Devonian and Upper Jurassic, which mainly consist of dolomite and limestone. The theoretical potential of water intake equal to the nominal heating capacity of a geothermal installation is estimated at 3.3 and 2.0 MW, respectively. Shallow geothermal energy potential varies within the city, reflecting the complex geological structure of the city. Apart from typical borehole heat exchangers (BHEs), the shallower water levels may represent a significant potential source for both heating and cooling by means of water heat pumps. For the heating network, it has been proposed to use modular heat pumps with hybrid sources, which will allow for the flexible development of the network in places previously unavailable or unprofitable. In the case of balancing production and demand, a photovoltaic installation can be an effective and sufficient source of electricity that will cover the annual electricity demand generated by the heat pump installation, when it is used for both heating and cooling. The alternating demand of facilities for heating and cooling energy, caused by changes in the seasons, suggests potential for using seasonal cold and heat storage.

Sign in / Sign up

Export Citation Format

Share Document