scholarly journals Effectiveness of oxygen enriched hydrogen-HHO gas addition on DI diesel engine performance, emission and combustion characteristics

2014 ◽  
Vol 18 (1) ◽  
pp. 259-268 ◽  
Author(s):  
S.R. Premkartikkumar ◽  
K. Annamalai ◽  
A.R. Pradeepkumar
Keyword(s):  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Diesel Engine ◽  
Engine Performance ◽  
Water Electrolysis ◽  
Combustion Characteristics ◽  
Flow Rates ◽  
Brake Thermal Efficiency ◽  
Unburned Hydrocarbon ◽  
Di Diesel Engine

Nowadays, more researches focus on protecting the environment. Present investigation concern with the effectiveness of Oxygen Enriched hydrogen- HHO gas addition on performance, emission and combustion characteristics of a DI diesel engine. Here the Oxygen Enriched hydrogen-HHO gas was produced by the process of water electrolysis. When potential difference is applied across the anode and cathode electrodes of the electrolyzer, water is transmuted into Oxygen Enriched hydrogen-HHO gas. The produced gas was aspirated into the cylinder along with intake air at the flow rates of 1 lpm and 3.3 lpm. The results show that when Oxygen Enriched hydrogen-HHO gas was inducted, the brake thermal efficiency of the engine increased by 11.06%, Carbon monoxide decreased by 15.38%, Unburned hydrocarbon decreased by 18.18%, Carbon dioxide increased by 6.06%, however, the NOX emission increased by 11.19%.

Investigating the Effect of Utilizing New Induction Manifold Designs on the Combustion Characteristics and Emissions of a Direct Injection Diesel Engine

2018 ◽  
Vol 140 (12) ◽  
Author(s):  
Mohamed A. Bassiony ◽  
Abdellatif M. Sadiq ◽  
Mohammed T. Gergawy ◽  
Samer F. Ahmed ◽  
Saud A. Ghani
Keyword(s):  
Diesel Engine ◽  
Peak Pressure ◽  
Direct Injection ◽  
Three Dimensional ◽  
Engine Performance ◽  
Combustion Characteristics ◽  
Maximum Pressure ◽  
Performance And Emissions ◽  
Di Diesel Engine ◽  
Dynamics Simulations

New induction manifold designs have been developed in this work to enhance the turbulence intensity and improve the mixing quality inside diesel engine cylinders. These new designs employ a spiral-helical shape with three different helical diameters (1D, 2D, 3D; where D is the inner diameter of the manifold) and three port outlet angles: 0 deg, 30 deg, and 60 deg. The new manifolds have been manufactured using three-dimensional printing technique. Computational fluid dynamics simulations have been conducted to estimate the turbulent kinetic energy (TKE) and the induction swirl generated by these new designs. The combustion characteristics that include the maximum pressure raise rate (dP/dθ) and the peak pressure inside the cylinder have been measured for a direct injection (DI) diesel engine utilizing these new manifold designs. In addition, engine performance and emissions have also been evaluated and compared with those of the normal manifold of the engine. It was found that the new manifolds with 1D helical diameter produce a high TKE and a reasonably strong induction swirl, while the ones with 2D and 3D generate lower TKEs and higher induction swirls than those of 1D. Therefore, dP/dθ and peak pressure were the highest with manifolds 1D, in particular manifold m (D, 30). Moreover, this manifold has provided the lowest fuel consumption with the engine load by about 28% reduction in comparison with the normal manifold. For engine emissions, m (D, 30) manifold has generated the lowest CO, SO2, and smoke emissions compared with the normal and other new manifolds as well, while the NO emission was the highest with this manifold.

Investigation and Optimization of Diesel Engine Outputs under Undi Biodiesel-Diesel Strategies

2021 ◽  
pp. 1-23
Author(s):  
Pravin Ashok Madane ◽  
Subrata Bhowmik ◽  
Rajsekhar Panua ◽  
P. Sandeep Varma ◽  
Abhishek Paul
Keyword(s):  
Carbon Monoxide ◽  
Particulate Matter ◽  
Diesel Engine ◽  
Thermal Efficiency ◽  
Operating Conditions ◽  
Oxides Of Nitrogen ◽  
Brake Thermal Efficiency ◽  
Trade Off ◽  
Unburned Hydrocarbon ◽  
The Impact

Abstract The present investigation accentuates the impact of Undi biodiesel blended Diesel on combustion, performance, and exhaust fume profiles of a single-cylinder, four-stroke Diesel engine. Five Undi biodiesel-Diesel blends were prepared and tested at four variable loads over a constant speed of 1500 (±10) rpm. The Undi biodiesel incorporation to Diesel notably improves the in-cylinder pressure and heat release rate of the engine. The higher amount of Undi biodiesel addition enhances the brake thermal efficiency and brake specific energy consumption of the engine. In addition, the Undi biodiesel facilitates to reduce the major pollutants, such as brake specific unburned hydrocarbon, brake specific carbon monoxide, and brake specific particulate matter emissions with slightly higher brake specific oxides of nitrogen emissions of the engine. To this end, a trade-off study was introduced to locate the favorable Diesel engine operating conditions under Undi biodiesel-Diesel strategies. The optimal Diesel engine outputs were found to be 32.65% of brake thermal efficiency, 1.21 g/kWh of brake specific cumulated oxides of nitrogen and unburned hydrocarbon, 0.94 g/kWh of brake specific carbon monoxide, and 0.32 g/kWh of brake specific particulate matter for 50% (by volume) Undi biodiesel share blend at 5.6 bar brake mean effective pressure with a relative closeness value of 0.978, which brings up the pertinence of the trade-off study in Diesel engine platforms.

THE EFFECT OF ETHANOL, PETROL AND RAPESEED OIL BLENDS ON DIRECT INJECTION DIESEL ENGINE PERFORMANCE AND EXHAUST EMISSIONS

Transport ◽  
2010 ◽  
Vol 25 (2) ◽  
pp. 116-128 ◽  
Author(s):  
Gvidonas Labeckas ◽  
Stasys Slavinskas
Keyword(s):  
Carbon Monoxide ◽  
Diesel Engine ◽  
Thermal Efficiency ◽  
Rapeseed Oil ◽  
Direct Injection ◽  
Engine Performance ◽  
Maximum Torque ◽  
Brake Thermal Efficiency ◽  
Brake Mean Effective Pressure ◽  
Smoke Opacity

The article deals with the testing results of a four stroke four cylinder, DI diesel engine operating on pure rapeseed oil (RO) and its 2.5vol%, 5vol% and 7.5vol% blends with ethanol (ERO) and petrol (PRO). The purpose of this study is to examine the effect of ethanol and petrol addition to RO on blend viscosity, percentage changes in brake mean effective pressure (bmep), brake specific fuel consumption (bsfc), the brake thermal efficiency (çe) of a diesel engine and its emission composition, including NO, NO2, NOX, CO, CO2, HC and the smoke opacity of exhausts. The addition of 2.5, 5 and 7.5vol% of ethanol and the same percentage of petrol into RO, at a temperature of 20 °C, diminish the viscosity of the blends by 9.2%, 21.3%, 28.3% and 14.1%, 24.8%, 31.7% respectively. Heating biofuels up to a temperature of 60 °C, diminishes the kinematic viscosity of RO, blends ERO2.5–7.5 and PRO2.5–7.5 4.2, 3.9–3.8 and 3.9–3.7 times accordingly. At a speed of 1400–1800 min‐1, bmep higher by 1.3% if compared with that of RO (0.772–0.770 MPa) ensures blend PRO2.5, whereas at a rated speed of 2200 min‐1 , bmep higher by 5.6–2.7% can be obtained when fuelling the loaded engine, ë = 1.6, with both PRO2.5–5 blends. The bsfc of the engine operating on blend PRO2.5 at maximum torque and rated power is respectively 3.0% and 5.5% lower. The highest brake thermal efficiency at maximum torque (0.400) and rated power (0.415) compared to that of RO (0.394) also suggests blend PRO2.5. The largest increase in NOXemissions making 1907 ppm (24.8%) and 1811 ppm (19.6%) compared to that of RO was measured from a more calorific blend PRO7.5 (9.99% oxygen) at low (1400 min‐1) and rated (2200 min‐1) speeds. The emission of carbon monoxide from blends ERO2.5–5 throughout the whole speed range runs lower from 6.1% to 32.9% and the smoke opacity of the fully loaded engine changes from 5.1% which is a higher to 46.4% which is a lower level if compared to the corresponding data obtained using pure RO. The CO2 emissions of carbon monoxide and the temperature of the exhausts generated by the engine running at a speed of 2200 min‐1 diminish from 7.8 vol% to 6.3vol% and from 500 °C to 465 °C due to the addition of 7.5vol% of ethanol to RO.

scholarly journals A Study on the Effects of Duration of Injection on Emissions and Combustion Characteristics in a Direct Injection Diesel Engine

2014 ◽  
Vol 17 (4) ◽  
pp. 67-76
Author(s):  
Em Van Tong Nguyen ◽  
Khai Le Duy Nguyen
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Engine Performance ◽  
Combustion Characteristics ◽  
Injection Timing ◽  
Oxides Of Nitrogen ◽  
Direct Injection Diesel Engine ◽  
Maximum Value ◽  
Nitrogen Emission ◽  
Di Diesel Engine

This paper present a study of the effects of duration of injection on emissions and combustion characteristics in a direct injection diesel engine using CFD code KIVA-3V. In this study, duration of injection was also changed from 6o to 12o CA while the injection timing is constant to evaluate the effect on DI Diesel engine performance, indicated specific fuel consumption and particulates and oxides of nitrogen emission. The obtained results indicate that the capacity of the engine reaches its maximum value and NOx and soot emissions is decreased when the duration of injection is in the range of 6o to 9o CA.

scholarly journals Comparison between PEE10 and PEE10-Bioethanol Blends on Performance and Emission Characteristics of a HSDI Diesel Engine

2021 ◽  
Vol 18 (22) ◽  
pp. 451
Author(s):  
Ekkachai Sutheerasak ◽  
Charoen Chinwanitcharoen ◽  
Sathaporn Chuepeng
Keyword(s):  
Nitric Oxide ◽  
Carbon Dioxide ◽  
Diesel Engine ◽  
Palm Oil ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency

Biofuels are an alternative fuel currently being developed to reduce the diesel-engine environmental impact. The release of carbon dioxide (CO2), nitric oxide (NO) and black smoke (BS) becomes an issue derived from diesel engines even in lean-mixture combustion causing an adverse effect to human health. The main aim of the research study is to present the use of biofuels, a mixture of diesel and 10 % palm oil ethyl ester (PEE10) and PEE10 blended with bioethanol from 5 to 20 %, compared with conventional diesel fuel. The biofuels were run on a high-speed direct injection diesel engine at a constant speed of 3,000 rpm under various loads. The use of PEE10 resulted in brake thermal efficiency (BTE) reduction by 2 % and brake specific fuel consumption (BSFC) incrementation by 8 %, but the exhaust emissions were lower than diesel, except for CO2 and NO. However, PEE10 engine performance was better and exhaust gas emissions were lower for both pollutants than diesel mixed with 10 % bioethanol. The investigation of PEE10 with increasing bioethanol revealed that the use of PEE10 blended with 5 % bioethanol (PEE10E5) can improve engine performance, while the BTE and BSFC were close to that of diesel, and exhaust emissions, especially CO2, NO and BS reduced. Moreover, BTE from PEE10E5 fueling increased by 2 % but BSFC was subtle increased, compared to PEE10. On the other hand, the increasing bioethanol from 10 to 20 % in PEE10 led to the more reduction in engine performance, but the engine pollutants were also continuously decreased. Specifically, the blend of PEE10 and 20 % bioethanol indicates that CO2, NO and BS were reduced by 10, 15 and 33 %, respectively, compared to diesel fuel. HIGHLIGHTS A mixture of diesel and 10 % palm oil ethyl ester (PEE10) has less exhaust emissions than diesel blended with 10 % palm oil methyl ester (PME10) PEE10 blended with 5 % bioethanol can improve engine performance, while the brake thermal efficiency and brake specific fuel consumption are close to that of diesel and PME10 The increasing bioethanol from 10 to 20 % in PEE10 leads to the more reduction in engine performance, but the engine pollutants, especially carbon dioxide, nitric oxide and black smoke, are also continuously decreased GRAPHICAL ABSTRACT

Effects of soybean biodiesel on a DI diesel engine performance, emission and combustion characteristics

Fuel ◽  
2014 ◽  
Vol 115 ◽  
pp. 875-883 ◽  
Author(s):  
Orkun Özener ◽  
Levent Yüksek ◽  
Alp Tekin Ergenç ◽  
Muammer Özkan
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Combustion Characteristics ◽  
Soybean Biodiesel ◽  
Di Diesel Engine

scholarly journals Performance, Emission and Combustion Characteristics of a Diesel Engine Powered by Macadamia and Grapeseed Biodiesels

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2748 ◽  
Author(s):  
Abul Kalam Azad ◽  
Julian Adhikari ◽  
Pobitra Halder ◽  
Mohammad G. Rasul ◽  
Nur M. S. Hassan ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Combustion Characteristics ◽  
Commercial Application ◽  
Engine Emissions ◽  
Physiochemical Properties ◽  
Brake Thermal Efficiency ◽  
Wide Range ◽  
Minimal Reduction

Biodiesel is an alternative, eco-friendly and renewable source of energy. It can be produced from a wide range of feedstocks which can be grown in marginal land use. It has drawn more attention to the researchers. In this study, the oil extraction, biodiesel conversion, and physiochemical properties of Macadamia (Macadamia integrifolia) and Grapeseed (Vitis vinifera) biodiesels are presented. The experimental investigation of diesel engine performance, emissions and combustion characteristics were conducted using B5 (5% biodiesel and 95% diesel by volume) and B10 (10% biodiesel and 90% diesel by volume) blends. The engine performance parameters, such as brake power (BP), brake specific fuel consumption (BSFC), and brake thermal efficiency (BTE) have been investigated in this experiment. The emission parameters, for example, carbon monoxide (CO), the ratio of CO2/CO, nitrogen oxide (NOx), hydrocarbon (HC), particulate matter (PM) have been measured during the experiment. Finally, the combustion parameters such as cylinder pressure (CP) were recorded, and heat release rate (HRR) was analysed and compared with that of diesel fuel. The study revealed that the Macadamia biodiesel performed better than Grapeseed biodiesel and behaved closely to that of diesel fuel. A significant reduction of engine emissions was found in the case of Macadamia biodiesel with a minimal reduction of engine performance. Further analysis of energy, exergy and tribological characteristics of the Macadamia biodiesel is recommended for assessing its feasibility for commercial application.

Sign in / Sign up

Export Citation Format

Share Document