scholarly journals Thermochemical ablation of carbon/carbon composites with non-linear thermal conductivity

2014 ◽  
Vol 18 (5) ◽  
pp. 1625-1629 ◽  
Author(s):  
Wei-Jie Li ◽  
Hai-Ming Huang ◽  
Yu-Meng Hu
Keyword(s):  
Thermal Conductivity ◽  
Computer Code ◽  
Ablation Rate ◽  
Carbon Composites ◽  
Rocket Nozzle ◽  
Ablation Mechanism ◽  
Non Linear ◽  
Constant Thermal Conductivity ◽  
Solid Rocket ◽  
The One

Carbon/carbon composites have been typically used to protect a rocket nozzle from high temperature oxidizing gas. Based on the Fourier?s law of heat conduction and the oxidizing ablation mechanism, the ablation model with non-linear thermal conductivity for a rocket nozzle is established in order to simulate the one-dimensional thermochemical ablation rate on the surface and the temperature distributions by using a written computer code. As the presented results indicate, the thermochemical ablation rate of a solid rocket nozzle calculated by using actual thermal conductivity, which is a function of temperature, is higher than that by a constant thermal conductivity, so the effect of thermal conductivity on the ablation rate of a solid rocket nozzle made of carbon/carbon composites cannot be neglected.

Time Domain FEA for Riser VIV Analysis

2010 ◽  
Author(s):  
Djoni E. Sidarta ◽  
Lyle D. Finn ◽  
Jim Maher
Keyword(s):  
Time Domain ◽  
Cross Flow ◽  
Computer Code ◽  
Frequency Domain Analysis ◽  
Initial Attempt ◽  
Good Comparison ◽  
Non Linear ◽  
Computer Codes ◽  
The One ◽  
Better Than

Risers are often subjected to non-linear boundary conditions, such as soil-SCR interaction and interaction between risers and the guides in the vessel, which often have gaps and non-linear stiffness. Also, current profiles may vary in direction through depth. In these cases, time domain FEA could represent the problems better than frequency domain analysis. Several computer codes are available for cross-flow VIV analysis using time domain FEA. This paper introduces SimVIV, a time domain computer code for cross-flow VIV and in-line VIV analysis. The algorithm used in SimVIV for cross-flow VIV analysis is consistent to the one used in the Highly Compliant Rigid Riser Joint Industry Project (HCR Riser JIP). The algorithm for in-line VIV is an added feature in this code, and for this initial attempt, this covers only in-line VIV that has about twice the frequency of the cross-flow VIV. This paper presents the results of SimVIV to predict cross-flow VIV and in-line VIV for model tests that have been done at the Delta Flume of Delft Hydraulics (May 2003). The results in general show good comparison to the measured data.

Thermal Characterization of Carbon-Carbon Composites

2011 ◽  
Author(s):  
Messiha Saad ◽  
Darryl Baker ◽  
Rhys Reaves
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Critical Role ◽  
Carbon Composite ◽  
Flash Method ◽  
Carbon Composites ◽  
Energy Storage Devices ◽  
Graphitized Carbon

Thermal properties of materials such as specific heat, thermal diffusivity, and thermal conductivity are very important in the engineering design process and analysis of aerospace vehicles as well as space systems. These properties are also important in power generation, transportation, and energy storage devices including fuel cells and solar cells. Thermal conductivity plays a critical role in the performance of materials in high temperature applications. Thermal conductivity is the property that determines the working temperature levels of the material, and it is an important parameter in problems involving heat transfer and thermal structures. The objective of this research is to develop thermal properties data base for carbon-carbon and graphitized carbon-carbon composite materials. The carbon-carbon composites tested were produced by the Resin Transfer Molding (RTM) process using T300 2-D carbon fabric and Primaset PT-30 cyanate ester. The graphitized carbon-carbon composite was heat treated to 2500°C. The flash method was used to measure the thermal diffusivity of the materials; this method is based on America Society for Testing and Materials, ASTM E1461 standard. In addition, the differential scanning calorimeter was used in accordance with the ASTM E1269 standard to determine the specific heat. The thermal conductivity was determined using the measured values of their thermal diffusivity, specific heat, and the density of the materials.

Preparation, microstructure and properties of three-dimensional carbon/carbon composites with high thermal conductivity

Carbon ◽  
2021 ◽  
Vol 174 ◽  
pp. 758-759
Author(s):  
Bao-liu Li ◽  
Jian-guang Guo ◽  
Bing Xu ◽  
Hui-tao Xu ◽  
Zhi-jun Dong ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Three Dimensional ◽  
High Thermal Conductivity ◽  
Carbon Composites ◽  
Microstructure And Properties

Numerical investigation of the propagation of shock waves in rigid porous materials: development of the computer code and comparison with experimental results

1996 ◽  
Vol 324 ◽  
pp. 163-179 ◽  
Author(s):  
A. Levy ◽  
G. Ben-Dor ◽  
S. Sorek
Keyword(s):  
Porous Materials ◽  
Initial Conditions ◽  
Computer Code ◽  
Experimental Results ◽  
Numerical Code ◽  
Materials Development ◽  
Numerical Predictions ◽  
Wide Range ◽  
Dimensional Version ◽  
The One

The governing equations of the flow field which is obtained when a thermoelastic rigid porous medium is struck head-one by a shock wave are developed using the multiphase approach. The one-dimensional version of these equations is solved numerically using a TVD-based numerical code. The numerical predictions are compared to experimental results and good to excellent agreements are obtained for different porous materials and a wide range of initial conditions.

scholarly journals Non-Gaussian inference from non-linear and non-Poisson biased distributed data

2014 ◽  
Vol 10 (S306) ◽  
pp. 258-261
Author(s):  
Metin Ata ◽  
Francisco-Shu Kitaura ◽  
Volker Müller
Keyword(s):  
Dark Matter ◽  
Statistical Inference ◽  
Computer Code ◽  
Matter Density ◽  
Density Field ◽  
Distributed Data ◽  
Dark Matter Density ◽  
Posterior Sampling ◽  
Non Linear ◽  
Non Gaussian

AbstractWe study the statistical inference of the cosmological dark matter density field from non-Gaussian, non-linear and non-Poisson biased distributed tracers. We have implemented a Bayesian posterior sampling computer-code solving this problem and tested it with mock data based onN-body simulations.

scholarly journals Experimental Cryoablation of Thyroid Gland with Propilthiouracyl-Induced Diffuse Hyperplasiae

2021 ◽  
Vol 31 (2) ◽  
pp. 168-179
Author(s):  
Kostiantyn Pobielienskyi ◽  
◽  
Oleksandr Pakhomov ◽  
Gurina Tetyana Gurina Tetyana ◽  
Liliia Pobielienska ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thyroid Gland ◽  
Liquid Nitrogen ◽  
Liquid Nitrogen Temperature ◽  
Freeze Thaw ◽  
Model Experiments ◽  
Endoscopic Control ◽  
The One ◽  
Benign Nodules

Cryoablation under endoscopic control is considered to be a promising approach in therapy of benign nodules of thyroid gland (TG). However, pathologically altered TG tissue differs in thermal conductivity and heat capacity from normal one, therefore the model experiments in animals are necessary to determine the cryoablation parameters. In this research, the changes of temperature during cryoablation of experimental rat TG under normal conditions and the one with propylthiouracil (PTU)-induced diffuse hyperplasia (DH) were comparatively assessed. TG was cryo-ablated in rats, previously received a 0.1% PTU solution within 90 days, using a copper cryoprobe, cooled to liquid nitrogen temperature. The process was controlled using thermocouples placed at different distances from the iceball. Differences between thermograms of intact TG tissue and the samples with PTU-induced DH were established. To achieve the destruction effect of TG with DH to a depth of more than 1 mm, the need of implementing two freeze-thaw cycles with 120-second cryoprobe exposure was proven.

scholarly journals Effects of pressure and temperature on thermal contact resistance between different materials

2015 ◽  
Vol 19 (4) ◽  
pp. 1369-1372 ◽  
Author(s):  
Zhe Zhao ◽  
Hai-Ming Huang ◽  
Qing Wang ◽  
Song Ji
Keyword(s):  
Thermal Conductivity ◽  
Contact Resistance ◽  
Thermal Contact Resistance ◽  
Experimental Approach ◽  
Phenolic Resin ◽  
Thermal Conductivity Coefficient ◽  
Thermal Contact ◽  
Carbon Composites ◽  
Interfacial Temperature ◽  
Temperature And Pressure

To explore whether pressure and temperature can affect thermal contact resistance, we have proposed a new experimental approach for measurement of the thermal contact resistance. Taking the thermal contact resistance between phenolic resin and carbon-carbon composites, cuprum, and aluminum as the examples, the influence of the thermal contact resistance between specimens under pressure is tested by experiment. Two groups of experiments are performed and then an analysis on influencing factors of the thermal contact resistance is presented in this paper. The experimental results reveal that the thermal contact resistance depends not only on the thermal conductivity coefficient of materials, but on the interfacial temperature and pressure. Furthermore, the thermal contact resistance between cuprum and aluminum is more sensitive to pressure and temperature than that between phenolic resin and carbon-carbon composites.

Sign in / Sign up

Export Citation Format

Share Document