scholarly journals Review on Power Quality Enhancement and its effects on Micro Grid

IJOSTHE ◽  
2020 ◽  
Vol 7 (1) ◽  
pp. 5
Author(s):  
Ankeeta . ◽  
Vasant Acharya
Keyword(s):  
Power Quality ◽  
Distribution System ◽  
Power Plants ◽  
Control Strategies ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Small Scale ◽  
Quality Enhancement ◽  
Reliability Of Operation ◽  
Unbalanced Loads

Power generation through the renewable energy sources has become more viable and economical than the fossil fuel based power plants. By integrating small scale distributed energy resources, microgrids are being introduced as an alternative approach in generating electrical power at distribution voltage level. The power electronic interface provides the necessary flexibility, security and reliability of operation between micro-sources and the distribution system. The presence of non-linear and the unbalanced loads in the distribution system causes power quality issues in the Microgrid system. This paper explores and reviews different control strategies developed in the literature for the power quality enhancement in microgrids.

scholarly journals Power Quality Investigation of Distribution Networks Embedded Wind Turbines

2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
A. Elsherif ◽  
T. Fetouh ◽  
H. Shaaban
Keyword(s):  
Power Systems ◽  
Wind Energy ◽  
Electric Power ◽  
Power Quality ◽  
Wind Turbines ◽  
Distribution System ◽  
Renewable Energy Sources ◽  
Distribution Networks ◽  
Small Scale ◽  
Distributed Resources

In recent years a multitude of events have created a new environment for the electric power infrastructure. The presence of small-scale generation near load spots is becoming common especially with the advent of renewable energy sources such as wind power energy. This type of generation is known as distributed generation (DG). The expansion of the distributed generators- (DGs-) based wind energy raises constraints on the distribution networks operation and power quality issues: voltage sag, voltage swell, voltage interruption, harmonic contents, flickering, frequency deviation, unbalance, and so forth. Consequently, the public distribution network conception and connection studies evolve in order to keep the distribution system operating in optimal conditions. In this paper, a comprehensive power quality investigation of a distribution system with embedded wind turbines has been carried out. This investigation is carried out in a comparison aspect between the conventional synchronous generators, as DGs are widely in use at present, and the different wind turbines technologies, which represent the foresightedness of the DGs. The obtained results are discussed with the IEC 61400-21 standard for testing and assessing power quality characteristics of grid-connected wind energy and the IEEE 1547-2003 standard for interconnecting distributed resources with electric power systems.

scholarly journals Small Scale Vertical Axis Wind Turbine

2021 ◽  
Author(s):  
Sahishnukumar Shah
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Wind Turbine ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Vertical Axis ◽  
Energy Sources ◽  
Small Scale ◽  
Vertical Axis Wind Turbine

The small-scale vertical axis wind turbine is designed and modeled in this project, considering all aspects of wind turbine such as Blade design, stator design, rotor design and converter system design. Electric Power has become a prime necessity for any country for economic development. The conventional fuel sources for power generation are depleting fast. The favorable alternatives are renewable energy sources. Although more invention has to be carried out in the field of renewable energy sources, every little effort in this direction may provide a solution to reach most economical power generation point. Hence the same topic was selected for Masters Project. The goal of this project is to design a small scale Vertical Axis Wind Turbine, which is capable of producing electrical power even with low wind velocity. It can be placed on road dividers, sidetracks of train or remote places i.e. villages, military camps, where it is not economical to transmit power from power plants. Implementation of such project would reduce the dependence of an industry or remote houses, on electricity board.

scholarly journals Power Quality Improvement using UPQC with Single and Three-Phase Non-linear Loads in Countryside Areas

2019 ◽  
Vol 9 (4) ◽  
pp. 18-24
Author(s):  
Shuchi Vishnoi ◽  
Keyword(s):  
Power Quality ◽  
Distribution System ◽  
Single Phase ◽  
Phase Distribution ◽  
Control Strategies ◽  
Electrical Power ◽  
Synchronous Reference Frame ◽  
Three Phase ◽  
Non Linear ◽  
Distribution Grids

This paper is intended to simulate a power quality conditioning device, Unified Power Quality Conditioner (UPQC), in countryside areas for non-linear loading. From past decades there is much increase in the requirement of the good quality electrical power in single phase distribution grids established in these locations. Due to technical advancement, three-phase loads are practiced more than single phase loads so that the demand for three phase distribution grids is growing. But the installation process of three-phase grids, at countryside areas, is not an economic option and to get access to these systems is a very challenging task. So a neighbouring three-phase distribution system is required to be established at the location, where single-phase to three-phase UPQC with single wire earth return is appropriate for the end user due to economic considerations. A dual compensation strategy is implemented to obtain the reference quantities for controlling the converters. The proposed idea is accomplished to eliminate voltage harmonics and mitigate further instabilities and power quality problems. This system allows the balanced and regulated voltage with lower harmonic content. Synchronous Reference Frame (SRF) based controllers are considered to organize the input grid current and the load voltages of the UPQC. The present prototype under consideration analyses and validates the compensation and controlling techniques using PI controller. The control strategies are simulated using MATLAB/SIMULINK.

scholarly journals Small Scale Vertical Axis Wind Turbine

2021 ◽  
Author(s):  
Sahishnukumar Shah
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Wind Turbine ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Vertical Axis ◽  
Energy Sources ◽  
Small Scale ◽  
Vertical Axis Wind Turbine

The small-scale vertical axis wind turbine is designed and modeled in this project, considering all aspects of wind turbine such as Blade design, stator design, rotor design and converter system design. Electric Power has become a prime necessity for any country for economic development. The conventional fuel sources for power generation are depleting fast. The favorable alternatives are renewable energy sources. Although more invention has to be carried out in the field of renewable energy sources, every little effort in this direction may provide a solution to reach most economical power generation point. Hence the same topic was selected for Masters Project. The goal of this project is to design a small scale Vertical Axis Wind Turbine, which is capable of producing electrical power even with low wind velocity. It can be placed on road dividers, sidetracks of train or remote places i.e. villages, military camps, where it is not economical to transmit power from power plants. Implementation of such project would reduce the dependence of an industry or remote houses, on electricity board.

scholarly journals Comparison of Control Strategies to Realize Synthetic Inertia in Converters

Energies ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3491 ◽  
Author(s):  
Jürgen Marchgraber ◽  
Christian Alács ◽  
Yi Guo ◽  
Wolfgang Gawlik ◽  
Adolfo Anta ◽  
...  
Keyword(s):  
Power Plants ◽  
Control Strategies ◽  
Power Grid ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Electrical Energy ◽  
Energy System ◽  
Frequency Stability ◽  
Synchronous Generators ◽  
Scope Of Application

The increasing amount of renewable energy sources in the electrical energy system leads to an increasing number of converter-based generators connected to the electrical power grid. Other than conventional power plants that are often connected to the grid via synchronous generators, converter-based generators do not provide mechanical inertia intrinsically. Therefore, ensuring frequency stability in the electrical power grid might become even more difficult in the future. With the concept of synthetic inertia, the converter-based generators partially imitate the behavior of conventional generators. By implementing such a concept in converters, they are capable of contributing to frequency stability as well. This paper compares two strategies to realize synthetic inertia by modeling converter-based generators in MATLAB/SIMULINK and simulating their behavior in a small Microgrid. The results prove that any kind of realization of synthetic inertia helps to improve frequency stability. Each of the two investigated strategies may have their scope of application in a future electrical energy system.

scholarly journals YYPO-PSO Algorithm Based Power Quality Control in a Grid-Connected Hybrid System

2021 ◽  
Vol 10 (2) ◽  
pp. 781-786
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Power Quality ◽  
Distribution System ◽  
Renewable Energy Sources ◽  
Small Scale ◽  
Power Electronic ◽  
Peak Period ◽  
Photovoltaic Array ◽  
Micro Grid

Micro-grid is a potential solution for the integration and management of renewable energy generation. Power generation through renewable energy sources has become more preferential and cost-effective, by articulating small scale distributed energy resources, micro-grids are becoming an alternative method in electrical power generation at the distribution voltage level. The increment of nonlinear loads and power electronic interfaced distribution generation system (DG) in the grid creates power quality issues like harmonic distortions in the distributed power system [6] [18]. The microgrid proposed in this paper consists of a photovoltaic array which represents the main generation unit and a three-phase induction generator that supplements the variable power generated by the photovoltaic array; a battery bank is included in the micro-grid to reduce the burden of the power generated by the micro-grid during the peak period [19] [20]. The power electronic interface maintains the necessary adaptability, security and reliability of operation between renewable sources and the distribution system [18]. In this paper, a comprehensive survey on micro-grid to improve the power quality parameters like THD is taken as the main objective with the help of suitable hybrid optimization algorithm, harmonic filters, controllers and battery storage.

scholarly journals Optical Voltage Transformer Based on FBG-PZT for Power Quality Measurement

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2699
Author(s):  
Marceli N. Gonçalves ◽  
Marcelo M. Werneck
Keyword(s):  
Power System ◽  
Power Quality ◽  
Distribution System ◽  
Electrical Power ◽  
Quality Measurement ◽  
Pockels Effect ◽  
Electrical Power System ◽  
Voltage Transformer ◽  
Technical Literature ◽  
Distribution Lines

Optical Current Transformers (OCTs) and Optical Voltage Transformers (OVTs) are an alternative to the conventional transformers for protection and metering purposes with a much smaller footprint and weight. Their advantages were widely discussed in scientific and technical literature and commercial applications based on the well-known Faraday and Pockels effect. However, the literature is still scarce in studies evaluating the use of optical transformers for power quality purposes, an important issue of power system designed to analyze the various phenomena that cause power quality disturbances. In this paper, we constructed a temperature-independent prototype of an optical voltage transformer based on fiber Bragg grating (FBG) and piezoelectric ceramics (PZT), adequate to be used in field surveys at 13.8 kV distribution lines. The OVT was tested under several disturbances defined in IEEE standards that can occur in the electrical power system, especially short-duration voltage variations such as SAG, SWELL, and INTERRUPTION. The results demonstrated that the proposed OVT presents a dynamic response capable of satisfactorily measuring such disturbances and that it can be used as a power quality monitor for a 13.8 kV distribution system. Test on the proposed system concluded that it was capable to reproduce up to the 41st harmonic without significative distortion and impulsive surges up to 2.5 kHz. As an advantage, when compared with conventional systems to monitor power quality, the prototype can be remote-monitored, and therefore, be installed at strategic locations on distribution lines to be monitored kilometers away, without the need to be electrically powered.

scholarly journals Rooftop Solar PV Penetration Impacts on Distribution Network and Further Growth Factors—A Comprehensive Review

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 55
Author(s):  
Busra Uzum ◽  
Ahmet Onen ◽  
Hany M. Hasanien ◽  
S. M. Muyeen
Keyword(s):  
Solar Energy ◽  
Power Quality ◽  
Distribution System ◽  
Renewable Energy Sources ◽  
Distribution Network ◽  
System Stability ◽  
Solar Pv ◽  
Voltage Quality ◽  
Solution Methods ◽  
Pv Penetration

In order to meet the electricity needs of domestic or commercial buildings, solar energy is more attractive than other renewable energy sources in terms of its simplicity of installation, less dependence on the field and its economy. It is possible to extract solar energy from photovoltaic (PV) including rooftop, ground-mounted, and building integrated PV systems. Interest in rooftop PV system applications has increased in recent years due to simple installation and not occupying an external area. However, the negative effects of increased PV penetration on the distribution system are troublesome. The power loss, reverse power flow (RPF), voltage fluctuations, voltage unbalance, are causing voltage quality problems in the power network. On the other hand, variations in system frequency, power factor, and harmonics are affecting the power quality. The excessive PV penetration also the root cause of voltage stability and has an adverse effect on protection system. The aim of this article is to extensively examines the impacts of rooftop PV on distribution network and evaluate possible solution methods in terms of the voltage quality, power quality, system protection and system stability. Moreover, it is to present a comparison of the advantages/disadvantages of the solution methods discussed, and an examination of the solution methods in which artificial intelligence, deep learning and machine learning based optimization and techniques are discussed with common methods.

Sign in / Sign up

Export Citation Format

Share Document