scholarly journals Analysis of the results of general traffic measurements on the national roads carried out in the years 2000-2015 in the Silesian Voivodeship

2018 ◽  
Vol 19 (6) ◽  
pp. 924-928
Author(s):  
Elżbieta Macioszek ◽  
Damian Lach

Paper presents the analysis of the results of General Traffic Measurements on the national roads carried out in the years 2000-2015 in the Silesian Voivodeship. Traffic measurements are the basic tool that is used to obtain information about traffic conditions. They allow identification of road infrastructure that requires modernization or complete reconstruction. The information obtained is needed to properly manage, maintain and plan the development of the road network. Data obtained from General Traffic Measurements are used to make decisions related to the classification of roads and to determine their priorities on the road network at the national and international scale. Information from the GTM allows to evaluate traffic conditions and the possibility of introducing changes to the organization of traffic.

2019 ◽  
Vol 65 (2) ◽  
pp. 49-53
Author(s):  
Miladin Nešić ◽  
Dušan Mladenović ◽  
Mirjana Ilić ◽  
Ivana Andrijanić ◽  
Mirko Koković ◽  
...  

The European Directive on the Road Infrastructure Safety Improvement (2008/96/EC) has established the implementation of appropriate procedures as the basic tools for improving the road infrastructure on the trans-European road network. The Law on Roads (2018) prescribes the implementation of the following procedures: Road safety impact assessment; Road safety audit; Road safety inspection; Risk mapping; Black spot identification; and In depth road accident studies. The Law on Roads also prescribes that the Minister will prescribe the manner of implementation and the contents of the Evaluation, Audit and Independent Assessment reports, as well as the manner of determining the major risk portions and the identification and ranking of hazardous sites (black spots). Since the method of implementation and the content of the report are not yet prescribed, the authors contributed in this paper to defining the manner of implementation and content of the traffic safety report on the example of the section of the highway, as the highest category of state road. In the framework of the training of auditors and auditors, among others, a pilot project was carried out for the safety of traffic on the part of the E-75 (A1) highway, about 2,7 km ahead of the Mali Požarevac loop, including the loop. The verified part of the highway also includes a ramp with a toll ramp, service facility, overpass, bridge, etc., so the selected checked part is representative for defining a recommendation for the mode of implementation and the model for the preparation of the report.


Author(s):  
Jan Kempa ◽  
Jacek Chmielewski ◽  
Grzegorz Bebyn

This paper presents the results of analyses that concern the benefits from the planned construction of a dam across the Vistula in Siarzewo. The simulated transport model developed in the VISUM environment has been used to determine the forecast traffic intensity, the value of traffic volume indices, transport activity, travel times of drivers and passengers as well as the costs of environmental impact. The above-mentioned characteristics have enabled to determine savings both in terms of traffic costs and environmental impacts resulting from the dam construction. The paper indicates that the implementation of the investment project improves traffic conditions on the road network and reduces the transport environmental impact in Kujawsko-Pomorskie Province. Moreover, it has been found that the revealed effects concern in particular the first years after the launch of the project. The development of the road network diminishes the role of the analysed investment project significantly.


2019 ◽  
Vol 290 ◽  
pp. 06004
Author(s):  
Cristian Deac ◽  
Lucian Tarnu

The realizing and improvement of road infrastructure, of modern road networks provides normal, safe and pleasant road traffic conditions and also help prevent road accidents. The road network, with its constructive characteristics, has to offer optimal conditions for the movement of vehicles, pedestrians and other categories of participants in the road traffic. Starting from the case study of a road sector with heavy road traffic, the current paper analyzes the increase in road safety in Romanian localities along European and national roads through the implementation of specific measures such as setting up sidewalks, installing New Jersey median barriers, expanding the road sectors with 2+1 lanes, replacing normal pedestrian crossings with elevated crossings or with pedestrian crossing with mid-road waiting areas etc.


2020 ◽  
pp. 002252662097950
Author(s):  
Fredrik Bertilsson

This article contributes to the research on the expansion of the Swedish post-war road network by illuminating the role of tourism in addition to political and industrial agendas. Specifically, it examines the “conceptual construction” of the Blue Highway, which currently stretches from the Atlantic Coast of Norway, traverses through Sweden and Finland, and enters into Russia. The focus is on Swedish governmental reports and national press between the 1950s and the 1970s. The article identifies three overlapping meanings attached to the Blue Highway: a political agenda of improving the relationships between the Nordic countries, industrial interests, and tourism. Political ambitions of Nordic community building were clearly pronounced at the onset of the project. Industrial actors depended on the road for the building of power plants and dams. The road became gradually more connected with the view of tourism as the motor of regional development.


2021 ◽  
Vol 43 (2) ◽  
pp. 262-278
Author(s):  
Ariane Dupont-Kieffer ◽  
Sylvie Rivot ◽  
Jean-Loup Madre

The golden age of road demand modeling began in the 1950s and flourished in the 1960s in the face of major road construction needs. These macro models, as well as the econometrics and the data to be processed, were provided mainly by engineers. A division of tasks can be observed between the engineers in charge of estimating the flows within the network and the transport economists in charge of managing these flows once they are on the road network. Yet the inability to explain their decision-making processes and individual drives gave some room to economists to introduce economic analysis, so as to better understand individual or collective decisions between transport alternatives. Economists, in particular Daniel McFadden, began to offer methods to improve the measure of utility linked to transport and to inform the engineering approach. This paper explores the challenges to the boundaries between economics and engineering in road demand analysis.


Author(s):  
R. S. Durov ◽  
◽  
E. V. Varnakova ◽  
K. O. Kobzev ◽  
◽  
...  

Introduction. One of the most pressing socio-economic problems is the state of the environment, which affects the living conditions of many people. The article deals with the problem areas of the intersection of 20-ya Liniya street – Sholokhov Avenue in Rostov-on-Don. Problem Statement. The purpose of this paper is to improve environmental safety at the intersection of 20-ya Liniya street – Sholokhov Avenue in Rostov-on-Don by reducing emissions from road transport through the proposed measures to reorganize traffic on this section of the road network. Theoretical Part. The article provides an assessment of environmental and road safety on the road network section before applying the proposed measures. The measures are listed and justified that would help improve the conditions for road transport at the selected intersection and reduce emissions from road transport, which would improve environmental safety. The calculation of environmental indicators was made after the proposed measures to reduce NOx emissions by cars. Conclusion. The article analyzes the environmental indicators before and after the events, and then compares them. Based on the analysis and calculations, it is determined how much the proposed measures to optimize traffic will help reduce NOx emissions by cars.


Author(s):  
I.V. Balabin ◽  
O.I. Balabin ◽  
I.S. Chabunin

The article presents issues related to improving safety and efficiency of operation of mobile machines in the constantly changing, winter temperature and traffic conditions. The authors develop a conceptual model of winter all-weather tires able to adapt to various road conditions such as when the road is covered with a layer of ice or compacted snow, or when the road is free from snow and ice. The use of such winter all weather tires will improve the road safety by contributing to increasing the life of tires and preserving the road network. The proposed model has no foreign analogues and is protected by a patent of the Russian Federation.


Author(s):  
Yao Liu ◽  
Jianmai Shi ◽  
Zhong Liu ◽  
Jincai Huang ◽  
Tianren Zhou

A novel high-voltage powerline inspection system is investigated, which consists of the cooperated ground vehicle and drone. The ground vehicle acts as a mobile platform that can launch and recycle the drone, while the drone can fly over the powerline for inspection within limited endurance. This inspection system enables the drone to inspect powerline networks in a very large area. Both vehicle’ route in the road network and drone’s routes along the powerline network have to be optimized for improving the inspection efficiency, which generates a new two-layer point-arc routing problem. Two constructive heuristics are designed based on “Cluster First, Rank Second” and “Rank First, Split Second”. Then local search strategies are developed to further improve the quality of the solution. To test the performance of the proposed algorithms, practical cases with different-scale are designed based on the road network and powerline network of Ji’an, China. Sensitivity analysis on the parameters related with the drone’s inspection speed and battery capacity is conducted. Computational results indicate that technical improvement on the inspection sensor is more important for the cooperated ground vehicle and drone system.


Author(s):  
Geetha A. ◽  
Subramani C.

<p><span>The modeling of a car is essentially done by taking into consideration the driving terrain, traffic conditions, driver’s behavior and various other factors which may directly or indirectly affect the vehicle’s performance. A vehicle is modeled for given specifications and constraints like maximum speed, maximum acceleration, and braking time, appropriate suspension for the gradient of the road and fuel consumption. Henceforth, a profound study and analysis of different drive cycles are essential. A time dependent drive cycle is a condensed form of data that helps us to determine the time taken to conduct the driving test on the road. This article highlights the development of a real driving cycle in the area of Tamilnadu, India. On-road vehicle’s speeds versus time data were obtained along the selected route. The data obtained were analyzed first and then a new driving cycle was developed.</span></p>


Sign in / Sign up

Export Citation Format

Share Document