scholarly journals Compressive Strength of Concrete with Recycled Concrete Aggregate as Coarse Aggregate and Recycled Paving Block Aggregate as Fine Aggregate Partially Substituted by Recycled Brick Aggregate

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Idi Priyono ◽  
Meiske Widyarti, Erizal
Keyword(s):  
Compressive Strength ◽  
Residential Buildings ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Fine Aggregate ◽  
Aggregate Concrete ◽  
Concrete Mix

An excessive extraction of natural resources for aggregate in concrete mix can caused an environmental degradation.  According to Indonesia ministry of industry in 2017, the use of cement is predicted will reach 84,96 million tons, that can affected the use of aggregate for concrete mix are quadruplet to 250 – 350 million tons. Opimally, the use of recycled material is green method that can reduce an excessive extraction of natural aggregates and keep an environmental sustain. The aim of this study is to obtain recycled aggregate concrete compressive strength and examine recycled aggregate concrete quality in days 3, 7, 28, 35, and 90 along with a proposal of the use of recycled aggregate concrete as a building construction material. This research used experimental method of SNI 03-2834-2002 the standard of normal concrete mix design for f’c 25 MPa then built five types of concrete mix of REC B, REC C, REC D, REC E, and REC F with every types of concrete has four sample are used for compressive strength test. The fine recycled paving block aggregate (RPA) were used partially to substituted a fine recycled brick aggregate (RBA) at 0%, 25%, 50%, 75%, and 100% by weigth. The result of this study showed the mixed concrete REC D with RCA 100%, RPA 50% and RBA 50% in 28 days is generate highest compressive strength than other recycle aggregates concrete mixes. Compressive strength at 28 days in a mix codes REC B, REC C, REC D, REC E and REC F are 18,12 MPa; 18,36 MPa; 19,35 MPa;16,69 MPa; and 16,39 MPa. The results show that it is feasible to replace a natural aggregate entirely by recycled aggregates. With compressive strength over 17 MPa at 28 days, mix codes REC B, REC C and REC D are recommended to use the recycled aggregate concrete for structure of residential buildings but mix codes REC E and REC F aren’t recommended and only allowed for non-structural concrete such as separate wall (SNI 8140:2016). Based on SNI 03-0691-1996 about solid brick concrete (paving block), recycle aggregate concrete with mix code of REC B, REC C, and REC D are able to use on paving block with B quality such as parking lot. While, recycled aggregate concrete with mix code of REC E and REC F are able to use on paving block with C and D quality which used for pedestrian, garden and other use. 

scholarly journals Utilisation of Recycled Aggregate as Coarse Aggregate in Concrete

2009 ◽  
Vol 1 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Yong P.C. ◽  
Teo D.C.L
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Construction Material ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Normal Concrete ◽  
Aggregate Concrete

In this rapid industrialised world, recycling construction material plays an important role to preserve the natural resources. In this research, recycled concrete aggregates (RCA) from site-tested concrete specimens were used. These consist of 28-days concrete cubes after compression test obtained from a local construction site. These concrete cubes are crushed to suitable size and reused as recycled coarse aggregate. The amount of recycled concrete aggregate used in this research is approximately 200 kg. Many researchers state that recycled aggregates are only suitable for non-structural concrete application. This research, however, shows that the recycled aggregates that are obtained from site-tested concrete specimen make good quality concrete. The compressive strength of recycled aggregate concrete (RAC) is found to be higher than the compressive strength of normal concrete. Recycled aggregate concrete is in close proximity to normal concrete in terms of split tensile strength, flexural strength and wet density. The slump of recycled aggregate concrete is low and that can be improved by using saturated surface dry (SSD) coarse aggregate.

Recycling of Waste Concrete and Fly Ash for Recycled Aggregate Concrete: Fundamental Characteristics Evaluation

2009 ◽  
Vol 620-622 ◽  
pp. 255-258 ◽  
Author(s):  
Cheol Woo Park
Keyword(s):  
Fly Ash ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Experimental Program ◽  
Concrete Aggregate ◽  
Fine Aggregate ◽  
Recycled Concrete Aggregate ◽  
Aggregate Concrete ◽  
Waste Concrete

As the amount of waste concrete has been increased and recycling technique advances, this study investigates the applicability of recycled concrete aggregate for concrete structures. In addition fly ash, the industrial by-product, was considered in the concrete mix. Experimental program performed compressive strength and chloride penetration resistance tests with various replacement levels of fine recycled concrete aggregate and fly ash. In most case, the design strength, 40MPa, was obtained. It was known that the replacement of the fine aggregate with fine RCA may have greater influence on the strength development rather than the addition of fly ash. It is recommended that when complete coarse aggregate is replaced with RCA the fine RCA replacement should be less than 60%. The recycled aggregate concrete can achieve sufficient resistance to the chloride ion penetration and the resistance can be more effectively controlled by adding fly ash. It I finally conclude that the recycled concrete aggregate can be successfully used in the construction field and the recycling rate of waste concrete and flay ash should be increased without causing significant engineering problems.

Experimental Study on Compressive Strength of Recycled Aggregate Concrete with Different Replacement Ratios

2012 ◽  
Vol 174-177 ◽  
pp. 1277-1280 ◽  
Author(s):  
Hai Yong Cai ◽  
Min Zhang ◽  
Ling Bo Dang
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Failure Mode ◽  
Failure Process ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Replacement Ratio ◽  
Aggregate Concrete

Compressive strengths of recycled aggregate concrete(RAC) with different recycled aggregates(RA) replacement ratios at 7d, 28d, 60d ages are investigated respectively. Failure process and failure mode of RAC are analyzed, influences on compressive strength with same mix ratio and different RA replacement ratios are analyzed, and the reason is investigated in this paper. The experimental results indicate that compressive strength of recycled concrete at 28d age can reach the standard generally, it is feasible to mix concrete with recycled aggregates, compressive strength with 50% replacement ratio is relatively high.

scholarly journals Compressive Strength Study on the Freeze-thaw Resistance of Recycled Aggregate Concrete Members

2017 ◽  
Vol 11 (1) ◽  
pp. 270-280 ◽  
Author(s):  
Haicheng Niu ◽  
Yonggui Wang ◽  
Xianggang Zhang ◽  
Xiaojing Yin
Keyword(s):  
Compressive Strength ◽  
Mass Loss ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Fine Aggregate ◽  
Replacement Rate ◽  
Aggregate Concrete ◽  
Freeze Thaw ◽  
Surface Scaling

Introduction: Freeze-thaw resistance of recycled aggregate concrete with partial or total replacement of recycled aggregate compared with that of natural aggregate concrete was investigated in this paper. Method: Ninety specimens were fabricated to study the influence of different recycled aggregate replacement ratios on the surface scaling, mass loss, and residual compressive strength after 100 freeze-thaw cycles. Results: The experiment results indicate that the type of recycled aggregate and its replacement ratio have significant effects on the freeze-thaw performance. The cubic compressive strength of recycled aggregate concrete is overall slightly lower than that of normal concrete. After 100 freeze-thaw cycles, the compressive strength decreases and the reduction extent increases with increasing replacement rate of recycled aggregate. The surface scaling of reinforced recycled concrete prisms tends to be more severe with the increase of freeze-thaw cycles. Conclusion: Furthermore, a notable rise in mass loss and the bearing capacity loss is also found as the substitution ratio increases. Under the same replacement rate, recycled fine aggregate causes more negative effects on the freeze-thaw resistance than recycled coarse aggregate.

scholarly journals Performance of Recycled Aggregate Concrete for M25 Grade Concrete

2019 ◽  
Vol 9 (2) ◽  
pp. 4694-4700
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Concrete ◽  
Inorganic Particles ◽  
Natural Aggregates

Recycled aggregates (RCA) are the aggregates which are made up of crushed, inorganic particles that are obtained from the construction demolition debris. Now a day’s protection of environment is the ultimate challenge to the society. So the usage of RCA’s is the best alternative for the aggregates which are obtained naturally in the construction activity. The scope of using these recycled concrete aggregates is increasing day by day. It reduces the cost effectively as we are using waste concrete as recycled aggregates. The main focus of this paper is to use find the strength qualities of recycled aggregates so as to use it as an alternative for the natural aggregates in high strength concrete for various construction activities. Comparison of workability, compressive strength, tensile strength, elastic modulus and flexural strength of recycled aggregate concrete is made with natural aggregate concrete. Here M25 grade concrete is taken and the natural aggregates were replaced with recycled aggregates in various percentages of 0%, 25%, 50%, 75% and 100%. The mix design for these replacement ratios are done by using code of IS 10262-2009. In order to determine the properties which were mentioned above a total of 60 cubes, 10 beams and 40 cylinders were casted. The compressive strength and tensile strength of RCA concrete have been determined for 7 days and 28 days where as the modulus of elasticity and the flexural strength of RCA concrete are determined after curing for the period of 28 days. The tests done on RCA concrete are compared with concrete which is obtained by natural aggregates As per IS codification the parameters which were determined are reducing moderately as the amount of aggregates which are recycled is being raised

scholarly journals Experimental Characterization of Recycled Aggregate Concrete

2019 ◽  
Vol 303 ◽  
pp. 05004
Author(s):  
Khaoula NAOUAOUI ◽  
Azzeddine BOUYAHYAOUI ◽  
Toufik CHERRADI
Keyword(s):  
Compressive Strength ◽  
Developed Countries ◽  
Tourism Industry ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Concrete ◽  
Different Types ◽  
Natural Aggregates

The field of construction is evolving rapidly over the last decade. This is justified by the evolution of human activity in various fields mainly tourism, industry … and the aging of several buildings which implies a renovation or a demolition/re-construction. These construction activities involve a large need for aggregates for new construction and a large tonnage of waste from demolitions. In order to remedy this, various stakeholders in the field (suppliers, cement works, research centers, etc.) have valued recycled aggregate concrete (RAC). Recycled aggregates concrete is considered a new type of concrete based on the use of aggregates retrieved from the demolished structures instead of natural aggregates. This replacement affects, for sure, the characteristics of the concrete produced specially the mechanical properties. Developed countries have made a great progress in normalizing the use of recycled aggregates (RA) in concrete implementation as a result of many studies done since 80’s. In Morocco, recycled aggregates do not have any specific standards, and is used mainly in roads and pavements construction. Even if it’s not normalized this use is not recent, in 1999 during the rehabilitation of the expressway road of Casablanca which was severely damaged on both channels, the authorities have opted for the reuse of aggregates instead of reloading the existing pavement with a new one. The study is based on the use of recycled concrete crushed from an old building in Rabat- Morocco as aggregates and compared it with naturel aggregates from Morocco to determinate the effect of this replacement on several characteristics of concrete. This article is aiming to investigate experimentally the effect of RA in concrete using different replacement levels, different types of adjuvant and different percentages of it. The results show that over 30% of replacement, the compressive strength decreases considerably for basic concrete. In order to increase the compressive strength for the RAC with a percentage of replacement over 50%, we used different types of additives (Plasticizer, superplasticizer and new generation superplasticizer) and different percentage of it (0.5%, 1% and 1.5%): We concludes that, for our case, the add of plasticizer gives the best result and that the 1% replacement is the optimum percentage. The tests done on RCA made by plasticizer with different replacement level confirm the results without plasticizer: Compressive strength decreases when the replacement percentage increases.

scholarly journals Mechanical Performance of Recycled Aggregate Concrete Containing Lathe Waste Steel Fibre

2021 ◽  
Vol 17 (4) ◽  
pp. 306-311
Author(s):  
S.A. Alabi ◽  
C. Arum
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Building Materials ◽  
Steel Fibre ◽  
Mechanical Performance ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Concrete Aggregate ◽  
Aggregate Concrete

The increasing demand, diminishing supplies, and growing pressure on natural resources have necessitated recycling and reusing waste. Several kinds of research have been done on the reuse and recycling of debris from building projects. Thus, with a view to the reuse of waste materials, the elimination of environmental contamination, the reduction of overhead costs of concrete, and the extension of the service life of concrete structures, this research aimed to study the feasibility of utilizing recycled concrete aggregate (RCA) with constant inclusion of waste steel fibre (LWSF) in concrete by evaluating its workability, compressive and splitting tensile strengths. A concrete mix ratio of 1:2:4 by weight of cement, sand, and granite was adopted with a water-cement ratio of 0.45. Five different concrete mixes were prepared in this study; one normal aggregate concrete (NAC) and four (4) other mixes with 25%, 50%, 75%, and 100% recycled aggregate content with a constant 1.5% addition of LWSF. The result of workability shows a reduction with an increase in the percentage replacement level. The recycled aggregate concrete (RAC) was characterized by lower compressive strength as compared with the NAC. When the replacement ratio increased from 25% to 50%, a significant reduction of about 14% and 30% were observed in the compressive strength at 7-days, but at 28-days slight increase in the compressive strength was observed. Also, a decrease in splitting tensile strength as the percentage replacement of crushed granite (CG) with RCA is increased was observed. Overall, the findings showed that the RAC-containing LWSF is environmentally sustainable and would significantly reduce the global greenhouse impact and building materials' overall quality. Keywords: Recycled concrete, lathe waste, steel fibre, compressive strength, tensile strength

scholarly journals Virtual Revision on Compressive Srength of Conventional Concrete and Recycled Aggregate Concrete Consisting Treated Recycled Aggregate

2019 ◽  
Vol 8 (3) ◽  
pp. 3439-3443
Keyword(s):  
Experimental Studies ◽  
Strength Properties ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Conventional Concrete ◽  
Aggregate Concrete ◽  
Natural Aggregate

Use of reused aggregate in concrete can be useful for the ecological protection and economical terms. The application of recycled has been started in many construction projects. Paper hear says the basic properties of recycled concrete aggregate. It similarly relates the properties with natural aggregate, similarly the properties of recycled aggregates concrete were also determined and explained here. For the concrete grades of M25 and M30, the recycled aggregate concrete is produced by changing the natural aggregate, by recycled aggregate in conventional concrete with 5%, 10% and 15% of weight of natural aggregates. Experimental studies were carried out on influence of recycled aggregate treatment and comparison of strength properties of conventional cement concrete and recycled aggregate concrete at the curing of 7days and 28 days. They are two types of treatments under the considerations for recycled aggregates are Abrasion of recycled aggregate and chemical immersion

Effect of Water Reducing Admixtures and Construction Variability in Concrete Containing Recycled Aggregate Concrete

2021 ◽  
Vol 47 (3) ◽  
pp. 456-464
Author(s):  
Claude Villiers
Keyword(s):  
Compressive Strength ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Target Strength ◽  
Concrete Aggregate ◽  
Recycled Concrete Aggregate ◽  
Effect Of Water ◽  
Concrete Mixtures ◽  
Concrete Mix

The objectives of this project are to evaluate the effect of water reducing admixtures and construction variability in concrete mixtures containing recycled concrete aggregate (RCA). A concrete mix that was approved for curbs and sidewalks in the State of Florida was selected. Based on the analysis conducted, it was found that properties of the RCA were comparable to the virgin aggregate used in this project. However, the absorption of the RCA was double as compared to the limestone. Although the compressive strength of the virgin mix was decreased by 19% when RCA was introduced into the mix, both mixes met the target strength (17.2 MPa). Admixture has a significant impact on all the mixes, especially on mixes that contained RCA. When admixture was omitted, the 28-day compressive strength dropped to nearly 55% on the mixture containing RCA. In addition, the RCA mix without the admixture did not reach the target strength at 28 days. Similarly, construction variability has a significant effect on the compressive strength of the mixes. When the RCA content was increased by 15% and 25% respectively, the concrete paste was weak. These mixtures did not meet the target strength at 28 days.

scholarly journals Assessment of recycled concrete aggregate properties required for structural concretes

2019 ◽  
Vol 262 ◽  
pp. 06010
Author(s):  
Marek Węglorz ◽  
Andrzej Ajdukiewicz ◽  
Alina Kliszczewicz
Keyword(s):  
Structural Engineering ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Aggregate Concrete ◽  
Recycled Concrete Aggregates ◽  
University Of Technology ◽  
Concrete Recycling

Assessment of recycled aggregate concrete (RAC) properties by laboratory tests is still required due to lack of precise guidelines and with taking into account slightly different behaviour of such concretes in comparison with natural aggregate concretes (NAC). It is especially important when recycled concrete aggregates are used for the structural elements. In this paper, the following rules for the whole concrete recycling cycle were defined: (1) rules for examination of original concretes selected for recycling and (2) rules for aggregate preparation and their fractionize as well as design rules for recycled aggregate concrete mixtures (including required tests of recycled aggregates and concrete properties). Requirements towards recycled aggregate concrete formulated in this paper are based on the long term experience and research works on the RAC which were held by A. Ajdukiewicz and A. Kliszczewicz in the Department of Structural Engineering of the Silesian University of Technology, practically since 1995.

Sign in / Sign up

Export Citation Format

Share Document