On the effect of the periodicity of diagnostic measurements on improving the reliability of high-voltage transformers

2019 ◽  
Vol 12 (1) ◽  
pp. 18-21
Author(s):  
V. A. Tikhonov
Keyword(s):  
Service Life ◽  
High Voltage ◽  
Chromatographic Analysis ◽  
Aluminum Industry ◽  
Early Stage ◽  
Diagnostic Methods ◽  
Transformer Oil ◽  
Operating Voltage ◽  
Dissolved Gases ◽  
The Aluminum Industry

The influence of the periodicity of diagnostic measurements on the operational state of high-voltage transformers is considered. Examples of defects of switching devices of converter transformers and methods for their detection are given. The rationale for the importance of recognition of defects at an early stage of their occurrence is given. The influence of the multiplicity of overvoltages on the service life of converter transformers in the aluminum industry is investigated. Based on the analysis of the service life of converter transformers of one of the powerful aluminum plants, where 83% of converter transformers have exhausted their standard service life, it is shown that in 40% of cases it would be possible to avoid their failures, with timely detection and elimination of emerging defects. Examples of defects of OLR (on-load regulators) of converter transformers and methods for their detection are given. The importance of recognition of defects at an early stage of their occurrence is substantiated. A method for chromatographic analysis of dissolved gases in transformer oil has been developed for the qualitative determination of defects and ways to eliminate them. Examples of diagnostics of converter transformers at operating voltage and working load are given, providing the best quality operational characteristics of converter transformers. The periodicity of diagnostic measurements and the reduction of defects and failures has been substantiated. The question of diagnosing the state of the converter transformer TDNP-40000/10 at an enterprise of the aluminum industry is investigated. Currently, diagnostic methods are being developed based on chromatographic analysis of dissolved gases in transformer oil. The presented method of evaluating the operating parameters of transformers allows for the safe operation of high-voltage transformers and enables to increase the reliability of the power supply scheme of aluminum industry plants.

scholarly journals Compaction of Cohesive Granular Material: Application to Carbon Paste

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 704
Author(s):  
Zahraa Kansoun ◽  
Hicham Chaouki ◽  
Donald Picard ◽  
Julien Lauzon-Gauthier ◽  
Houshang Alamdari ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Mechanical Behavior ◽  
Aluminum Industry ◽  
Frequency Effect ◽  
Strain Rates ◽  
Cyclic Tests ◽  
Carbon Paste ◽  
Rheological Models ◽  
Softening Behavior ◽  
The Aluminum Industry

Carbon-like materials such as the anode and the ramming paste play a crucial role in the efficiency of the Hall–Héroult process. The mechanical behavior of these materials during forming processes is complex and still ill-understood. This work aimed to investigate experimentally the mechanical behavior of a carbon paste used in the aluminum industry under different loading conditions. For this purpose, experiments consisting of (1) relaxation tests at different compaction levels, (2) quasi-static cyclic tests at several amplitudes, (3) monotonic compaction tests at varied strain rates, and (4) vibrocompaction tests at different frequencies were carried out. The obtained results highlight some fundamental aspects of the carbon paste behavior such as the strain rate’s effect on the paste compressibility, the hardening-softening behavior under cyclic loadings, the effect of cycling amplitude on the stress state and the paste densification, and the frequency effect on the vibrocompaction process. These results pave the way for the development of reliable rheological models for the modeling and the numerical simulation of carbon pastes forming processes.

scholarly journals The Emerging Factors and Treatment Options for NAFLD-Related Hepatocellular Carcinoma

Cancers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 3740
Author(s):  
Chunye Zhang ◽  
Ming Yang
Keyword(s):  
Hepatocellular Carcinoma ◽  
Liver Cancer ◽  
Fatty Liver ◽  
Early Stage ◽  
Primary Liver Cancer ◽  
Treatment Options ◽  
Underlying Mechanism ◽  
Diagnostic Methods ◽  
T Cell Therapy ◽  
Nonalcoholic Fatty Liver

Hepatocellular carcinoma (HCC) is the most common type of primary liver cancer, followed by cholangiocarcinoma (CCA). HCC is the third most common cause of cancer death worldwide, and its incidence is rising, associated with an increased prevalence of obesity and nonalcoholic fatty liver disease (NAFLD). However, current treatment options are limited. Genetic factors and epigenetic factors, influenced by age and environment, significantly impact the initiation and progression of NAFLD-related HCC. In addition, both transcriptional factors and post-transcriptional modification are critically important for the development of HCC in the fatty liver under inflammatory and fibrotic conditions. The early diagnosis of liver cancer predicts curative treatment and longer survival. However, clinical HCC cases are commonly found in a very late stage due to the asymptomatic nature of the early stage of NAFLD-related HCC. The development of diagnostic methods and novel biomarkers, as well as the combined evaluation algorithm and artificial intelligence, support the early and precise diagnosis of NAFLD-related HCC, and timely monitoring during its progression. Treatment options for HCC and NAFLD-related HCC include immunotherapy, CAR T cell therapy, peptide treatment, bariatric surgery, anti-fibrotic treatment, and so on. Overall, the incidence of NAFLD-related HCC is increasing, and a better understanding of the underlying mechanism implicated in the progression of NAFLD-related HCC is essential for improving treatment and prognosis.

scholarly journals Predicting the influence of the non-sinusoidal network mode on power transformers

2019 ◽  
Vol 114 ◽  
pp. 04005
Author(s):  
Ngo Van Cuong ◽  
Lidiia I. Kovernikova
Keyword(s):  
Service Life ◽  
Electric Power ◽  
Power Quality ◽  
Electrical Equipment ◽  
Operating Conditions ◽  
Transformer Oil ◽  
Power Transformers ◽  
Electrical Network ◽  
Electrical Networks ◽  
Current Harmonics

The parameters of electrical network modes often do not meet the requirements of Russian GOST 32144-2013 and the guidelines of Vietnam. In the actual operating conditions while there is the non-sinusoidal mode in electrical networks voltage and current harmonics are present. Harmonics result in overheating and damage of power transformers since they cause additional active power losses. Additional losses lead to the additional heat release, accelerating the process of insulating paper, transformer oil and magnetic structure deterioration consequently shortening the service life of a power transformer. In this regard there arises a need to develop certain scientific methods that would help demonstrate that low power quality, for instance could lead to a decrease in the electrical equipment service life. Currently we see a development of automated systems for continuous monitoring of power quality indices and mode parameters of electrical networks. These systems could be supplemented by characteristics calculating programs that give out a warning upon detection of the adverse influence of voltage and current harmonics on various electrical equipment of both electric power providers and electric power consumers. A software program presented in the article may be used to predict the influence of voltage and current harmonics on power transformers.

Study on dielectric surface discharge in transformer oil under high voltage nanosecond pulse

2005 ◽  
Vol 63 (6-10) ◽  
pp. 665-671 ◽  
Author(s):  
J. Wang ◽  
Y.X. Zhou ◽  
P. Yan ◽  
W.L. Huang ◽  
G.J. Li ◽  
...  
Keyword(s):  
High Voltage ◽  
Dielectric Surface ◽  
Nanosecond Pulse ◽  
Transformer Oil ◽  
Surface Discharge

Binders for Carbon Electrodes in the Aluminum Industry

1955 ◽  
Vol 47 (7) ◽  
pp. 1412-1415 ◽  
Author(s):  
L. P. Charette ◽  
G. T. Bischofberger
Keyword(s):  
Aluminum Industry ◽  
Carbon Electrodes ◽  
The Aluminum Industry

scholarly journals Carbon Based Nanodots in Early Diagnosis of Cancer

2021 ◽  
Vol 9 ◽  
Author(s):  
Gurpal Singh ◽  
Harinder Kaur ◽  
Akanksha Sharma ◽  
Joga Singh ◽  
Hema Kumari Alajangi ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Early Stage ◽  
Imaging Techniques ◽  
Graphene Quantum Dots ◽  
Carbon Quantum Dots ◽  
Diagnostic Methods ◽  
Early Diagnosis Of Cancer ◽  
Successful Treatment Outcome ◽  
Wide Range ◽  
Carbon Based

Detection of cancer at an early stage is one of the principal factors associated with successful treatment outcome. However, current diagnostic methods are not capable of making sensitive and robust cancer diagnosis. Nanotechnology based products exhibit unique physical, optical and electrical properties that can be useful in diagnosis. These nanotech-enabled diagnostic representatives have proved to be generally more capable and consistent; as they selectively accumulated in the tumor site due to their miniscule size. This article rotates around the conventional imaging techniques, the use of carbon based nanodots viz Carbon Quantum Dots (CQDs), Graphene Quantum Dots (GQDs), Nanodiamonds, Fullerene, and Carbon Nanotubes that have been synthesized in recent years, along with the discovery of a wide range of biomarkers to identify cancer at early stage. Early detection of cancer using nanoconstructs is anticipated to be a distinct reality in the coming years.

Sign in / Sign up

Export Citation Format

Share Document