Cyclic Loading Response of Composite Corrugated Steel Plate Shear Walls - Smart Technic

2021 ◽  
Vol 14 (4) ◽  
pp. 131-145
Author(s):  
Nabaa Salah Hassan
Keyword(s):  
Cyclic Loading ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
Structural Elements ◽  
Structural Element ◽  
Steel Plate Shear Walls ◽  
Composite Shear Wall ◽  
Steel Shear Wall ◽  
Composite Shear

The structural element within the whole structure contains structural elements like beams, slabs, columns and reinforced concrete walls. One of the most vertical structural elements is shear wall that built to giving stability to the building, resisting lateral force such as earthquake and wind and to reduce the building deformations.  In present study, the analysis of corrugated vertical steel plate shear walls using finite element method by ABAQUS software is examined. Four different modes are analysed in which the first model is vertical corrugated steel shear wall plate, second is the composite shear wall with full interaction, third is the composite shear wall and finally the fourth model is composite shear wall with gap between concrete panel and steel frame to check out the full performance of different shear wall under the effects of cyclic loadings. Displacement, drift and energy dissipation will investigate throughout analysis.  Analysis results indicated that the gap and composite action between steel and concrete panel play an important role on the performance of shear wall under cyclic loading. The decrease in displacement of composite shear wall as compared with the steel shear wall reach 11.86%.

Seismic Research and Development of Steel Plate Concrete Composite Shear Wall

2012 ◽  
Vol 238 ◽  
pp. 640-642
Author(s):  
Ya Bin Yang
Keyword(s):  
Seismic Performance ◽  
Steel Plate ◽  
Rapid Development ◽  
Engineering Application ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Force ◽  
High Rise ◽  
Composite Shear Wall ◽  
Composite Shear

Shear wall is the main component that resists the lateral force for high-rise buildings. With the rapid development of high-rise buildings, especially the super high-rise buildings, requirements for seismic performance of shear walls have become more sophisticated. The steel plate concrete composite shear wall shows good seismic performance. It has made rapid development through the research of seismic performance in the way of seismic design to the practical engineering application of steel plate concrete composite shear wall. Recent research situation and prospect of composite shear wall around the world have been introduced in this paper.

scholarly journals Performance of Composite Shear Walls Subjected to In-plane Cyclic Loading - A Numerical Parametric Study

2021 ◽  
Author(s):  
Mojtaba Labibzadeh ◽  
Anis Salehnia ◽  
Khandaker M. A. Hossain ◽  
Deng-Hu Jing
Keyword(s):  
Energy Absorption ◽  
Steel Plate ◽  
Numerical Models ◽  
Load Capacity ◽  
Shear Walls ◽  
Shear Wall ◽  
Plate Height ◽  
Finite Element Software ◽  
Composite Shear Wall ◽  
Composite Shear

An RC shear wall (wall1), a composite shear wall composed of a single external steel plate connected to a concrete panel (wall2), a composite shear wall constructed from two external steel plates connected to an internal concrete panel (wall3) and finally a composite shear wall fabricated with a single internal steel plate embedded within a concrete panel (wall4) are considered in this study and their behavior are assessed and compared under the effect of an in-plane cyclic load. Variation of the three functions include shear load capacity, energy absorption and shear stiffness of the walls are evaluated numerically using the ABAQUS finite element software. The performance of numerical models is validated against to the experimental results. The effects of four parameters consisting of compressive strength of concrete, yield strength of steel plate, height-to-length ratio of the wall and the thickness of the steel plate are investigated on the above-mentioned functions. Obtained results show that the wall4 has the best performance among all four types of shear walls. For instance, the energy absorption capacity of the wall4 is approximately two times greater than that of wall1 and wall2.

scholarly journals A Comparative Study on Shear Wall Concept in Accordance to its Seismic Behavior

2018 ◽  
Vol 7 (4.5) ◽  
pp. 182
Author(s):  
Deepna U ◽  
Arjun S Menon ◽  
S Balamurugan
Keyword(s):  
Seismic Performance ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Loads ◽  
Steel Plate Shear Wall ◽  
Composite Shear Wall ◽  
Story Drift ◽  
Comparison Of The Results ◽  
Composite Shear

The consequences of lateral loads like earthquake loads, wind loads and blast forces are achieving utmost concern nowadays. Imparting sufficient strength and stability in counter to the lateral loads is one of the major challenges faced by every designer. Therefore Proper understanding of the Seismic performance of different types of shear walls is necessary for structural engineers so as to safeguard the structure against lateral loads. The present paper describes the comparison of the seismic performance of high rise buildings and optimizing the thickness of RCC shear wall, Steel Plate Shear Wall (SPSW) and composite shear wall for (G+20) stories. The design and analysis of the  building with RCC shear wall, steel plate shear wall and composite shear wall is carried out using software ETABS. Effect of varying thickness of shear panels and comparison of the results of story drift and story shear is presented.  

scholarly journals Effect of Corrugation Angle and Direction on the Performance of Corrugated Steel Plate Shear Walls

2018 ◽  
Vol 4 (11) ◽  
pp. 2667
Author(s):  
Hayder Fadhil ◽  
Amer Ibrahim ◽  
Mohammed Mahmood
Keyword(s):  
Steel Plate ◽  
Low Cost ◽  
Shear Walls ◽  
High Strength ◽  
Shear Wall ◽  
Initial Stiffness ◽  
Construction Time ◽  
Element Analysis ◽  
Steel Plate Shear Wall ◽  
Steel Shear Wall

Corrugated steel plate shear wall (CSPSW) is one of the lateral resistance systems which consists mainly of steel frame (beam and column) with vertical or horizontal corrugated steel plate connected to the frame by weld, bolts or both. This type of steel shear wall characterized by low cost and short construction time with high strength, ductility, initial stiffness and excellent ability to dissipate energy. The aim of this paper is to evaluate the effect of corrugation angle and its direction on the performance of CSPSW under cyclic loading. The Finite element analysis was employed to achieve the research aim. The FE models were validated with experimental data available in the literature. Results reveal that the corrugation angle has a clear influence on initial stiffness, strength, ductility, and energy dissipation of CSPSW. The optimum performance of CSPSW can be obtained with angles of 30o for CSPSW with vertical corrugation and 20o for CSPSW with horizontal corrugation. The use of CSPSW with vertical corrugation provides higher strength, stiffness, and ductility compared to CSPSW with horizontal corrugation. Therefore, it is recommended to use CSPSW with vertical corrugation.

An innovative system of coupled steel plate shear wall with pin FUSE in link beam: Cyclic behavior and energy dissipation

2021 ◽  
pp. 136943322110542
Author(s):  
Mahdi Usefvand ◽  
Ahmad Maleki ◽  
Babak Alinejad
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Energy Dissipation ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
High Ductility ◽  
The Finite Element Method ◽  
Steel Plate Shear Walls ◽  
Steel Plate Shear Wall

Coupled steel plate shear wall (C-SPSW) is one of the resisting systems with high ductility and energy absorption capacity. Energy dissipation in the C-SPSW system is accomplished by the bending and shear behavior of the link beams and SPSW. Energy dissipation and floor displacement control occur through link beams at low seismic levels, easily replaced after an earthquake. In this study, an innovative coupled steel plate shear wall with a yielding FUSE is presented. The system uses a high-ductility FUSE pin element instead of a link beam, which has good replaceability after the earthquake. In this study, four models of coupled steel plate shear walls were investigated with I-shaped link beam, I-shaped link beam with reduced beam section (RBS), box-link beam with RBS, and FUSE pin element under cyclic loading. The finite element method was used through ABAQUS software to develop the C-SPSW models. Two test specimens of coupled steel plate shear walls were validated to verify the finite element method results. Comparative results of the hysteresis curves obtained from the finite element analysis with the experimental curves indicated that the finite element model offered a good prediction of the hysteresis behavior of C-SPSW. It is demonstrated in this study that the FUSE pin can improve and increase the strength and energy dissipation of a C-SPSW system by 19% and 20%, respectively.

Experimental study on seismic behaviors of the welded L-shaped double steel plate-concrete composite shear wall

2021 ◽  
Vol 187 ◽  
pp. 106944
Author(s):  
Wenhui He ◽  
Yikun Wan ◽  
Yuyu Li ◽  
JinBin Bu ◽  
Jianliang Deng ◽  
...  
Keyword(s):  
Experimental Study ◽  
Steel Plate ◽  
Shear Wall ◽  
Composite Shear Wall ◽  
Composite Shear ◽  
Seismic Behaviors

Shear strength of steel plate reinforced concrete shear wall

2020 ◽  
Vol 23 (8) ◽  
pp. 1629-1643
Author(s):  
Zhi Zhou ◽  
Jiang Qian ◽  
Wei Huang
Keyword(s):  
Finite Element ◽  
Shear Strength ◽  
Reinforced Concrete ◽  
Steel Plate ◽  
Shear Wall ◽  
American Institute ◽  
Composite Shear Wall ◽  
Steel Construction ◽  
Composite Shear ◽  
Modified Formula

This article investigates the shear strength of steel plate reinforced concrete shear wall under cyclic loads. A nonlinear three-dimensional finite element model in ABAQUS was developed and validated against published experimental results. Then, a parametric study was conducted to evaluate the effects of the parameters on the lateral capacity of composite shear wall, including shear span ratio, concrete strength, axial load ratio, steel plate ratio and transverse reinforcement ratio of the web. Furthermore, a modified formula of shear strength of composite shear wall was proposed. Regression analyses were used to obtain the contribution coefficients of different parts from 720 finite element models. Finally, the shear strengths of specimens from published tests were compared with design strengths calculated using the proposed formula, American Institute of Steel Construction Provisions and Chinese Code. It was found that the Chinese Code well predicts the shear strength of composite shear wall of a steel plate ratio of less than 5%, while unsafely predicting that of a higher steel plate ratio. The American Institute of Steel Construction Provisions predictions are quite conservative because the contribution of the reinforced concrete is neglected. The modified formula safely predicts the shear strength of composite shear wall.

Bearing capacity of composite shear wall incorporating a concrete-filled steel tube boundary and column-type reinforced wall

2020 ◽  
Vol 23 (10) ◽  
pp. 2188-2203
Author(s):  
Zhao Nannan ◽  
Wang Yaohong ◽  
Han qing ◽  
Su Hao
Keyword(s):  
Bearing Capacity ◽  
Residual Deformation ◽  
Shear Walls ◽  
Shear Wall ◽  
Steel Tube ◽  
Concrete Filled Steel Tube ◽  
Composite Shear Wall ◽  
Boundary Shear ◽  
Column Type ◽  
Composite Shear

Composite shear walls are widely used in high-rise buildings because of their high bearing capacity. To improve the bearing capacity of ordinary shear walls, restraining elements are usually installed at both boundaries or within the wall body. In this article, two different restraining elements, namely, a rectangular steel tube and a column-type reinforcement (the whole wall body was restrained by segmented stirrups and tied by diagonal bars), were applied to the boundary frame and wall body of the shear wall either jointly or separately. A new type of steel-concrete composite shear wall, referred to as a composite shear wall incorporating a concrete-filled steel tube boundary and column-type reinforced wall, was proposed. In addition, three specimens with different restraining elements, namely, a column-type reinforced shear wall, a concrete-filled steel tube boundary shear wall and an ordinary reinforced concrete shear wall, were presented for comparison. The influences of the two different restraining elements on the seismic performance and bearing capacity of the shear walls were analyzed from four perspectives of failure mode, hysteresis behavior, stiffness and residual deformation, and the equivalent lateral pressures of the two restraining elements were calculated. Based on the plane-section assumption, expressions for the crack, yield, peak and ultimate bearing capacities were derived, and the effects of the two restraining elements on the peak and ultimate bearing capacities were considered. The results show that these two restraining elements significantly improved the bearing capacity of the shear wall specimens, and the concrete-filled steel tube restraining element was more effective than the column-type reinforced restraining element. Finally, the calculated values of the bearing capacity of the four different restraining elements of the shear wall specimens proposed in this article were in good agreement with the experimental values.

Sign in / Sign up

Export Citation Format

Share Document