scholarly journals Photovoltaic Modules for Indoor Energy Harvesting

2018 ◽  
Vol 14 (1) ◽  
pp. 5222-5231 ◽  
Author(s):  
Wafaa Abd El-Basit Zekri
Keyword(s):  
Energy Harvesting ◽  
Maximum Output Power ◽  
Monocrystalline Silicon ◽  
Photovoltaic Module ◽  
Fluorescent Light ◽  
Light Sources ◽  
Maximum Output ◽  
Photovoltaic Modules ◽  
Harvesting Systems ◽  
Optimum Solution

This paper presents the performance of indoor energy harvesting systems based on different photovoltaic modules (monocrystalline silicon, polycrystalline silicon, amorphous silicon and polymer) and artificial electric lighting sources (incandescent, fluorescent and cool white flood LED). In this concern, it is clearly proved that, maximum output power densities to be harvested from the photovoltaic module depends mainly on the spectral responses of both the light source and the module material. Herein, and from the study, experimental work, results and analysis, it is clear that monocrystalline silicon is the optimum solution for all light sources, followed by polycrystalline, whenever used with spot-and incandescent - lamps. On the other hand, amorphous samples were proved to be lightly sensitive to fluorescent light and cool white flood LED. Finally, polymer samples were weakly responded whenever exposed to any of the investigated light sources.

scholarly journals FINITE ELEMENT SIMULATION OF MEMS PIEZOELECTRIC ENERGY SCAVENGER BASED ON PZT THIN FILM

2019 ◽  
Vol 20 (1) ◽  
pp. 90-99
Author(s):  
Aliza Aini Md Ralib ◽  
Nur Wafa Asyiqin Zulfakher ◽  
Rosminazuin Ab Rahim ◽  
Nor Farahidah Za'bah ◽  
Noor Hazrin Hany Mohamad Hanif
Keyword(s):  
Thin Film ◽  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Maximum Output Power ◽  
Vibration Energy ◽  
Maximum Output ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Energy ◽  
The World

Vibration energy harvesting has been progressively developed in the advancement of technology and widely used by a lot of researchers around the world. There is a very high demand for energy scavenging around the world due to it being cheaper in price, possibly miniaturized within a system, long lasting, and environmentally friendly. The conventional battery is hazardous to the environment and has a shorter operating lifespan. Therefore, ambient vibration energy serves as an alternative that can replace the battery because it can be integrated and compatible to micro-electromechanical systems. This paper presents the design and analysis of a MEMS piezoelectric energy harvester, which is a vibration energy harvesting type. The energy harvester was formed using Lead Zicronate Titanate (PZT-5A) as the piezoelectric thin film, silicon as the substrate layer and structural steel as the electrode layer. The resonance frequency will provide the maximum output power, maximum output voltage and maximum displacement of vibration. The operating mode also plays an important role to generate larger output voltage with less displacement of cantilever. Some designs also have been studied by varying height and length of piezoelectric materials. Hence, this project will demonstrate the simulation of a MEMS piezoelectric device for a low power electronic performance. Simulation results show PZT-5A piezoelectric energy with a length of 31 mm and height of 0.16 mm generates maximum output voltage of 7.435 V and maximum output power of 2.30 mW at the resonance frequency of 40 Hz. ABSTRAK: Penuaian tenaga getaran telah berkembang secara pesat dalam kemajuan teknologi dan telah digunakan secara meluas oleh ramai penyelidik di seluruh dunia. Terdapat permintaan yang sangat tinggi di seluruh dunia terhadap penuaian tenaga kerana harganya yang lebih murah, bersaiz kecil dalam satu sistem, tahan lama dan mesra alam. Manakala, bateri konvensional adalah berbahaya bagi alam sekitar dan mempunyai jangka hayat yang lebih pendek. Oleh itu, getaran tenaga dari persekitaran lebih sesuai sebagai alternatif kepada bateri kerana ia mudah diintegrasikan dan serasi dengan sistem mikroelektromekanikal. Kertas kerja ini  membentangkan reka bentuk dan analisis tenaga piezoelektrik MEMS iaitu salah satu jenis penuaian tenaga getaran. Penuai tenaga ini dibentuk menggunakan Lead Zicronate Titanate (PZT-5A) sebagai lapisan filem tipis piezoelektrik, silikon sebagai lapisan substrat dan keluli struktur sebagai lapisan elektrod. Frekuensi resonans akan memberikan hasil tenaga maksima, voltan tenaga maksima dan getaran jarak maksima. Mod pengendalian juga memainkan peranan penting bagi menghasilkan tenaga yang lebih besar. Reka bentuk yang mempunyai ketinggian dan panjang berlainan juga telah diuji dengan menggunakan bahan piezoelektrik yang sama. Oleh itu, projek ini akan menghasilkan simulasi piezoelektrik MEMS yang sesuai digunakan bagi alat elektronik berkuasa rendah. Hasil simulasi menunjukkan dengan panjang 31 mm dan ketinggian 0.16 mm, piezoelektrik PZT ini menghasilkan voltan maksima sebanyak 7.435 V dan tenaga output maksima 2.30 mW pada frekuensi resonans 40 Hz.

Study of Cantilever Structures Based on Piezoelectric Materials for Energy Harvesting at Low Frequency of Vibration

2014 ◽  
Vol 976 ◽  
pp. 159-163 ◽  
Author(s):  
Roberto Ambrosio ◽  
Hector Gonzalez ◽  
Mario Moreno ◽  
Alfonso Torres ◽  
Rafael Martinez ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Power ◽  
Lead Zirconate Titanate ◽  
Maximum Output Power ◽  
Low Frequency ◽  
Electrical Contacts ◽  
Piezoelectric Energy Harvesting ◽  
Maximum Output ◽  
Coupling Coefficients ◽  
Piezoelectric Energy

In this work is presented a study of a piezoelectric energy harvesting device used for low power consumption applications operating at relative low frequency. The structure consists of a cantilever beam made by Lead Zirconate Titanate (PZT) layer with two gold electrodes for electrical contacts. The piezoelectric material was selected taking into account its high coupling coefficients. Different structures were analyzed with variations in its dimensions and shape of the cantilever. The devices were designed to operate at the resonance frequency to get maximum electrical power output. The structures were simulated using finite element (FE) software. The analysis of the harvesting devices was performed in order to investigate the influence of the geometric parameters on the output power and the natural frequency. To validate the simulation results, an experiment with a PZT cantilever with brass substrate was carried out. The experimental data was found to be very close to simulation data. The results indicate that large structures, in the order of millimeters, are the ideal for piezoelectric energy harvesting devices providing a maximum output power in the range of mW

scholarly journals Experimental Study on Piezoelectric Energy Harvesting from Vortex-Induced Vibrations and Wake-Induced Vibrations

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Min Zhang ◽  
Junlei Wang
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Maximum Output Power ◽  
Load Resistance ◽  
Maximum Output ◽  
Piezoelectric Energy ◽  
Vortex Induced Vibrations ◽  
Flow Induced Vibrations ◽  
Generation Capacity ◽  
Output Characteristics

A rigid circular cylinder with two piezoelectric beams attached on has been tested through vortex-induced vibrations (VIV) and wake-induced vibrations (WIV) by installing a big cylinder fixed upstream, in order to study the influence of the different flow-induced vibrations (FIV) types. The VIV test shows that the output voltage increases with the increases of load resistance; an optimal load resistance exists for the maximum output power. The WIV test shows that the vibration of the small cylinder is controlled by the vortex frequency of the large one. There is an optimal gap of the cylinders that can obtain the maximum output voltage and power. For a same energy harvesting device, WIV has higher power generation capacity; then the piezoelectric output characteristics can be effectively improved.

scholarly journals Performance Evaluation of a Piezoelectric Energy Harvester Based on Flag-Flutter

Micromachines ◽  
2020 ◽  
Vol 11 (10) ◽  
pp. 933 ◽  
Author(s):  
Hassan Elahi ◽  
Marco Eugeni ◽  
Federico Fune ◽  
Luca Lampani ◽  
Franco Mastroddi ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
Wind Tunnel ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Maximum Output Power ◽  
Research Work ◽  
Maximum Output ◽  
Operational Environment ◽  
Subsonic Wind Tunnel ◽  
Piezoelectric Energy

In the last few decades, piezoelectric (PZT) materials have played a vital role in the aerospace industry because of their energy harvesting capability. PZT energy harvesters (PEH) absorb the energy from an operational environment and can transform it into useful energy to drive nano/micro-electronic components. In this research work, a PEH based on the flag-flutter mechanism is presented. This mechanism is based on fluid-structure interaction (FSI). The flag is subjected to the axial airflow in the subsonic wind tunnel. The performance evaluation of the harvester and aeroelastic analysis is investigated numerically and experimentally. A novel solution is presented to extract energy from Limit Cycle Oscillations (LCOs) phenomenon by means of PZT transduction. The PZT patch absorbs the flow-induced structural vibrations and transforms it into electrical energy. Furthermore, the optimal resistance and length of the flag is predicted to maximize the energy harvesting. Different configurations of flag i.e., with Aluminium (Al) patch and PZT patch for flutter mode vibration mode are studied numerically and experimentally. The bifurcation diagram is constructed for the experimental campaign for the flutter instability of a cantilevered flag in subsonic wind-tunnel. Moreover, the flutter boundary conditions are analysed for reduced critical velocity and frequency. The designed PZT energy harvester via flag-flutter mechanism is suitable for energy harvesting in aerospace engineering applications to drive wireless sensors. The maximum output power that can be generated from the designed harvester is 6.72 mW and the optimal resistance is predicted to be 0.33 MΩ.

Improvement in Power of Shingled Solar Cells for Photo-Voltaic Module

2020 ◽  
Vol 20 (11) ◽  
pp. 7096-7099
Author(s):  
Hongsub Jee ◽  
Jinho Song ◽  
Daehan Moon ◽  
Jaehyeong Lee ◽  
Chaehwan Jeong
Keyword(s):  
Solar Cells ◽  
Output Power ◽  
Current Density ◽  
Power Loss ◽  
Maximum Output Power ◽  
Photovoltaic Module ◽  
Maximum Output ◽  
Conductive Adhesives ◽  
Electrically Conductive ◽  
Electrically Conductive Adhesives

This paper presents a study on the effects of heat treatment conditions on electrically conductive adhesives. Among the advantages of the shingled solar cells include larger active area and smaller current density since one of the main factors of the power loss is due to a decrease in current density. Therefore, when there is a small current, there is a benefit in regards to the power loss. The advantage of this new technique of developing photovoltaic modules is the increase of module power using the same installed area. Electrically conductive adhesives play an important role in the manufacture of shingled solar cells and understanding the effects of its curing condition is necessary to maximize its output power. Through changing the curing time and temperature, the optimized curing conditions for electrically conductive adhesives and fabricated shingled strings for development of a module could be established. Finally, we demonstrated a 500 mm × 500 mm photovoltaic module with a conventional and the other using the shingled method for purposes of comparison and a shingled module showed about 29% increase in maximum output power compared to a conventional module with the same installed area.

scholarly journals Modeling and Simulation of Solar Module performance using Five Parameters Model by using Matlab in Baghdad City

2018 ◽  
Vol 24 (10) ◽  
pp. 15
Author(s):  
Emad Talib Hashim ◽  
Zainab Riyadh Talib
Keyword(s):  
Electrical Response ◽  
Maximum Output Power ◽  
Iteration Process ◽  
Operating Conditions ◽  
Photovoltaic Module ◽  
Maximum Output ◽  
Atmospheric Conditions ◽  
Shunt Resistance ◽  
Solar Module ◽  
Solar Radiation Intensity

This work presents the modeling of the electrical response of monocrystalline photovoltaic module by using five parameters model based on manufacture data-sheet of a solar module that measured in stander test conditions (STC) at radiation 1000W/m² and cell temperature 25 . The model takes into account the series and parallel (shunt) resistance of the module. This paper considers the details of Matlab modeling of the solar module by a developed Simulink model using the basic equations, the first approach was to estimate the parameters: photocurrent Iph, saturation current Is, shunt resistance Rsh, series resistance Rs, ideality factor A at stander test condition (STC) by an iteration process. To implement the iteration process, a numerical approach based on the Newton Raphson method has been implemented and programmed in Matlab. The second mathematical model used in Matlab/Simulink using equations for each parameter to determine the parameters at all operating conditions. The Matlab program gives the information about the behavior of the practical PV module, under different atmospheric conditions. The model accuracy was also analyzed through finding out the compatibility between the practical and the theoretical aspects at different solar radiation intensity 500, 750 and 1000 W/m2 by extracting the error ratios. The results show that there is difference between theoretical (modeled) and experimental, the best validation (less error) between five parameters model and experimental maximum power results at radiation 500, 750, 1000 W/m2 and STC was 5.5%, 19%, 18% and 12.3% in January respectively, due to the decreases in ambient temperature and thus decreases in the temperature of solar module in January led to increase in maximum output power and producing best validation between model and experimental in this month.    

A Novel Tri-Direction Energy Harvester Using Bimorph Cantilever Structure

2012 ◽  
Vol 220-223 ◽  
pp. 669-673
Author(s):  
Kang Qi Fan ◽  
Bo Wang ◽  
Hai Dong Huo
Keyword(s):  
Energy Harvesting ◽  
Theoretical Analysis ◽  
Resonance Frequency ◽  
Bluff Body ◽  
Energy Harvester ◽  
Maximum Output Power ◽  
Ambient Vibration ◽  
Maximum Output ◽  
Power Devices ◽  
Cantilever Structure

Energy harvesting for powering low-power devices has drawn considerable attention over the last decade. This paper reports a novel tri-direction energy harvester to scavenge energy from wind and vibration, or a combination of them. The proposed harvester consists of a triple-level bimorph cantilever with a mass block to harness energy from ambient vibration. The mass block also acts as an aerofoil and bluff body to scavenge energy from wind. Theoretical analysis shows that the maximum output power of the harvester is 2.77 W, and the resonance frequency is 79 Hz.

Design and Demonstration of Concentration Cells for Small Scale Energy Harvesting based on Reverse Electrodialysis

2011 ◽  
Vol 1325 ◽  
Author(s):  
Ramin Banan Sadeghian ◽  
Oxana Pantchenko ◽  
Daniel Scott Tate ◽  
Javad Shabani ◽  
Mehrdad M. Zarandi ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Maximum Output Power ◽  
Open Circuit ◽  
Power Delivery ◽  
Small Scale ◽  
Maximum Output ◽  
Reverse Electrodialysis ◽  
Delivery Times ◽  
Macro Scale ◽  
Circuit Output

ABSTRACTExperimental results are presented to demonstrate feasibility of small scale power generation using static reverse electrodialysis (RED) of CuSO4 solutions. In contrast to conventional macro scale reverse electrodialysis, the concentrated and diluate compartments were not refreshed, resulting in limited power delivery times. This is important in energy harvesting applications from limited supply of ionic concentrations. Maximum output power density of 0.17 μW·cm−2 was recorded using microfiltration membranes. The evolution of the open circuit output voltage with time is accurately modeled at various concentration ratios.

Sign in / Sign up

Export Citation Format

Share Document