Electrolytic analysis with platinum electrodes of light weight

1912 ◽  
Vol s4-34 (200) ◽  
pp. 107-112
Author(s):  
F. A. Gooch ◽  
W. L. Burdick
Keyword(s):  
Light Weight ◽  
Platinum Electrodes

Control of Metal Alloy Oxidation with Electric Fields

1973 ◽  
Vol 31 ◽  
pp. 164-165
Author(s):  
R. R. Dils ◽  
P. S. Follansbee
Keyword(s):  
Electric Fields ◽  
Oxidation Process ◽  
Base Alloy ◽  
Oxide Surface ◽  
Platinum Electrodes ◽  
Insulating Layer ◽  
Iron Base Alloy ◽  
Alloy Oxidation ◽  
Aluminum Oxide Layer ◽  
And Control

Electric fields have been applied across oxides growing on a high temperature alloy and control of the oxidation of the material has been demonstrated. At present, three-fold increases in the oxidation rate have been measured in accelerating fields and the oxidation process has been completely stopped in a retarding field.The experiments have been conducted with an iron-base alloy, Pe 25Cr 5A1 0.1Y, although, in principle, any alloy capable of forming an adherent aluminum oxide layer during oxidation can be used. A specimen is polished and oxidized to produce a thin, uniform insulating layer on one surface. Three platinum electrodes are sputtered on the oxide surface and the specimen is reoxidized.

Cerebral Tissue Response in Chronic Electrode Implantation

1977 ◽  
Vol 35 ◽  
pp. 624-625
Author(s):  
R.F. Dodson ◽  
L.W-F Chu ◽  
N. Ishihara
Keyword(s):  
Tissue Response ◽  
Whole Body ◽  
Platinum Electrodes ◽  
Fixed Tissue ◽  
Electrode Implantation ◽  
Surface Areas ◽  
Tissue Changes ◽  
Micron Diameter ◽  
Extent Of Damage ◽  
Electrode Sheath

The extent of damage surrounding an implanted electrode in the cerebral cortex is a question of significant importance with regard to attaining consistency and validity of physiological recordings. In order to determine the extent of such tissue changes, 150 micron diameter platinum electrodes were implanted in the cortex of four adult baboons, and after eight days the animals were sacrificed by whole body perfusion with a 3% glutaraldehyde in 0.1M phosphate fixative.The calvarium was carefully removed and the electrode tracts were readily discernible in the firm, glutaraldehyde fixed tissue.Careful dissection of the zone of the electrode tract resulted in a small block which was further sectioned into tip, mid-tract and surface areas. Ultrastructurally, damage extended from the electrode sheath to the greatest extent of from 0.2 to 3.5 mm.

Use of fractals to describe microstructures of porous thick-film platinum electrodes

1992 ◽  
Vol 50 (1) ◽  
pp. 314-315
Author(s):  
Steven D. Toteda
Keyword(s):  
Fractal Dimension ◽  
Power Plants ◽  
Electrical Response ◽  
Cubic Phase ◽  
Platinum Electrodes ◽  
Fine Grained ◽  
Impedance Response ◽  
Platinum Particles ◽  
Energy Surfaces ◽  
Highly Porous

Zirconia oxygen sensors, in such applications as power plants and automobiles, generally utilize platinum electrodes for the catalytic reaction of dissociating O2 at the surface. The microstructure of the platinum electrode defines the resulting electrical response. The electrode must be porous enough to allow the oxygen to reach the zirconia surface while still remaining electrically continuous. At low sintering temperatures, the platinum is highly porous and fine grained. The platinum particles sinter together as the firing temperatures are increased. As the sintering temperatures are raised even further, the surface of the platinum begins to facet with lower energy surfaces. These microstructural changes can be seen in Figures 1 and 2, but the goal of the work is to characterize the microstructure by its fractal dimension and then relate the fractal dimension to the electrical response. The sensors were fabricated from zirconia powder stabilized in the cubic phase with 8 mol% percent yttria. Each substrate was sintered for 14 hours at 1200°C. The resulting zirconia pellets, 13mm in diameter and 2mm in thickness, were roughly 97 to 98 percent of theoretical density. The Engelhard #6082 platinum paste was applied to the zirconia disks after they were mechanically polished ( diamond). The electrodes were then sintered at temperatures ranging from 600°C to 1000°C. Each sensor was tested to determine the impedance response from 1Hz to 5,000Hz. These frequencies correspond to the electrode at the test temperature of 600°C.

Microstructure of an extruded rapidly solidified Al-8Fe-2Mo alloy

1986 ◽  
Vol 44 ◽  
pp. 548-549
Author(s):  
W. T. Donlon ◽  
J. E. Allison ◽  
S. Shinozaki
Keyword(s):  
Electron Microscopy ◽  
Automotive Industry ◽  
Fuel Economy ◽  
High Strength ◽  
Al Alloys ◽  
Light Weight ◽  
Thin Sections ◽  
Strength And Durability ◽  
Rapidly Solidified ◽  
Whitney Aircraft

Light weight materials which possess high strength and durability are being utilized by the automotive industry to increase fuel economy. Rapidly solidified (RS) Al alloys are currently being extensively studied for this purpose. In this investigation the microstructure of an extruded Al-8Fe-2Mo alloy, produced by Pratt & Whitney Aircraft, Goverment Products Div. was examined in a JE0L 2000FX AEM. Both electropolished thin sections, and extraction replicas were examined to characterize this material. The consolidation procedure for producing this material included a 9:1 extrusion at 340°C followed by a 16:1 extrusion at 400°C, utilizing RS powders which have also been characterized utilizing electron microscopy.

SrBi2Nb2O9 ferroelectric thin films deposited by pulsed laser deposition on textured and epitaxied platinum electrodes

2001 ◽  
Vol 11 (PR11) ◽  
pp. Pr11-133-Pr11-137
Author(s):  
J. R. Duclère ◽  
M. Guilloux-Viry ◽  
A. Perrin ◽  
A. Dauscher ◽  
S. Weber ◽  
...  
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Ferroelectric Thin Films ◽  
Laser Deposition ◽  
Platinum Electrodes

Light-Weight Tire Concept

1996 ◽  
Vol 24 (2) ◽  
pp. 119-131
Author(s):  
F. Lux ◽  
H. Stumpf
Keyword(s):  
Fuel Consumption ◽  
Automobile Industry ◽  
Rolling Resistance ◽  
Performance Standards ◽  
Light Weight ◽  
Production Methods ◽  
Lower Fuel Consumption ◽  
Material Resources ◽  
The Past ◽  
Tire Production

Abstract Current demands by the consumer, the automobile industry, and the environment have determined the basis of this investigation. In the past, the requirements—ever faster, ever sportier—were accepted as decisive parameters for the development of our study. In the future, rational and safety-related tire characteristics as well as environmental consciousness will increase, whereas purely performance-related parameters will diminish in their importance. Through our light-weight tire project, we have paved the way for future tire generations. The first priority is the minimal use of material resources; this means a reduction of materials and energy in tire production by using advanced design and production methods without sacrificing performance standards. This benefits the consumer—the final judge of all of our activities—by considerably reducing the rolling resistance, leading to lower fuel consumption. Further design targets include the improvement of rolling behavior and increased comfort by reducing tire weight, and therefore a reduction in unsprung masses on the vehicle.

Determinants Considered by Consumers for Brand Selection - with Reference to Laptops in Albania

2014 ◽  
Vol 4 (2) ◽  
Author(s):  
Margret Plloçi ◽  
Macit Koc
Keyword(s):  
Primary Data ◽  
Battery Life ◽  
Decision Making Process ◽  
Light Weight ◽  
Sources Of Information ◽  
Technical Features ◽  
The Relationship ◽  
The City ◽  
Different Sources ◽  
Core Features

Abstract Purpose of the article There is relatively a big number of brands in the market of laptops nowadays in Albania. It appears that the number of brands offered in this market could easily be compared to the number of brands in Europe and even broader. The purpose of this study is to help Albanian vendors understand the criteria that consumers take into consideration when they make the decision to purchase a laptop. Methodology/methods The research is based on the collection and the analyses of the primary data collected through interviews to people like managers or employees who work in the sector of trading laptops or in businesses like education where laptops are broadly used recently; then a survey is done through a questionnaire delivered to customers who already own and use a laptop and customers who are potential buyers of laptops. Scientific aim The aim of the research is to identify if there are any relationships between the demographics of the consumers and the criteria of buying a laptop; on the other hand, to find out how is the relationship between the demographics and the features of different brands. Findings The study found out that Albanian consumers have good knowledge of laptops and their brands, and they use different sources of information for making their decisions in buying a laptop; it is found that there are relationships between some demographics like age or gender and the appraisal for some attributes of the laptops like price, design and high graphics card; it is also found that some technical features and other attributes of using laptops are some of the determinants that influence the laptops’ purchases. Conclusions It is realized that one of the most important demographics of the consumers is their age. Some core features like RAM, ROM, battery life, processor quality, light weight or attributes that are connected to the purposes of using the laptop computers like practicality and mobility in using them, work and studying processes, quick access to the internet are determinant factors which influence the decision making process of purchasing a laptop. I would recommend that future researches be focused also on the relationship between the customers’ income and their preferred brand or ranking brands according to the customers’ preferences. Such studies should also extend outside the city of Tirana.

Development of a low-power xenon ion thruster for light-weight satellites

1996 ◽  
Author(s):  
O. Gorshkov ◽  
V. Muravlev ◽  
V. Grigor'yan
Keyword(s):  
Low Power ◽  
Light Weight ◽  
Ion Thruster
Sign in / Sign up

Export Citation Format

Share Document