Effect of irrigation and nutrient on physical properties of safflower seeds

2014 ◽  
Vol 28 (1) ◽  
pp. 7-14
Author(s):  
Maziar Feyzollahzadeh ◽  
Asaad ModaresMotlagh ◽  
Ali M. Nikbakht
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Surface Area ◽  
Coefficient Of Friction ◽  
Geometric Mean ◽  
Organic Fertilizers ◽  
Dynamic Coefficient ◽  
Mean Diameter ◽  
Mass Volume ◽  
Dynamic Coefficient Of Friction

Abstract The effect of irrigation and nutrient treatments on physical properties of safflower seeds was investigated. Physical properties of safflower seeds were determined at a moisture content of 7% w.b. The parameters determined at different treatments were: size, geometric mean diameter, sphericity, surface area, mass, volume, bulk and true densities, porosity, and static and dynamic coefficient of friction. The results showed a better effect of the use of organic fertilizers in comparison with chemical ones. The results showed that nutrient and irrigation treatments had a significant effect on most of the physical properties of safflower seeds at p<0.01.

Physical properties of kumquat fruit

2013 ◽  
Vol 27 (1) ◽  
pp. 107-109 ◽  
Author(s):  
F. Jaliliantabar ◽  
A.N. Lorestani ◽  
R. Gholami
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Physical Properties ◽  
Elasticity Modulus ◽  
Geometric Mean ◽  
Rupture Force ◽  
Projected Area ◽  
Initial Rupture ◽  
Mean Diameter ◽  
Mass Volume

Abstract Some physical properties of kumquat were investigated. Physical properties which were measured included fruit dimensions, mass, volume, projected area, density, geometric mean diameter, sphericity and surface area. Bulk density, porosity and also packaging coefficient were calculated. Mechanical properties such as the elasticity modulus, rupture force and energy required for initial rupture have been determined. The experiments were carried out at moisture content of 82.6% (w.b.). The results show that the kumquat fruit is one of the smallest fruit in the citrus family.

Effect of moisture content on physical properties of cashew nut of different varieties

2016 ◽  
Vol 44 (2) ◽  
Author(s):  
Shrikant Baslingappa Swami ◽  
N.J. Thakor A.M. Gawai
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Surface Area ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
True Density ◽  
Cashew Nut ◽  
Mean Diameter ◽  
Effect Of Moisture

<p>The physical properties, viz., geometric diameter, surface area, sphericity, volume, bulk density, true density and angle of repose was measured for  four  cashew varieties <em>viz</em>., <em>Vengurle 1, Vengurle 3, Vengurle 4</em>  and <em>Vengurle 7</em> at different moisture content (15 to 87% db). For <em>Vengurle</em> 1 as the moisture content increased, the physical properties i.e., geometric mean diameter, volume, surface area, true density and angle of repose increased from 20.8 to 22.1 mm, 3485 to 4416 mm<sup>3</sup>, 1355 to 1540 mm<sup>2</sup>, 984 to 1030 kg m<sup>-3</sup> and 32 to 37˚, respectively. The sphericity and bulk density decreased from 74.2 to 71.4 per cent and 490 to 418 kg m<sup>-3</sup> respectively. For <em>Vengurle 3</em> geometric mean diameter, volume, surface area, true density and angle of repose increased from 27.2 to 28.6 mm, 7912 to 9169 mm<sup>3</sup>, 2320 to 2567 mm<sup>2</sup>, 1020 to 1048 kg m<sup>-3</sup> and 33 to 35.5˚, respectively. The sphericity and bulk density decreased from 75.5 to 75.2 per cent and 531 to 470 kg m<sup>-3</sup> respectively. For <em>Vengurle 4</em> the geometric mean diameter, volume, surface area, true density and angle of repose increased from 21.0 to 24.1mm, 3362 to 5113 mm<sup>3</sup>, 1391 to 1828 mm<sup>2</sup>, 970 to 1030 kg m<sup>-3</sup> and 32.5 to 38˚,  respectively. The sphericity and bulk density decreased from 65.8 to 66.8 per cent, 517 to 462 kg m<sup>-3</sup>, respectively. For <em>Vengurle 7</em> the geometric mean diameter, volume, surface area, true density and angle of repose increased from 24.2 to 24.9 mm, 5102 to 5547 mm<sup>3</sup>, 1840 to 1941 mm<sup>2</sup>, 998 to 1045 kg m<sup>-3</sup> and 33 to 38˚, respectively. The sphericity and bulk density decreased from 65.4 to 65.8 per cent, 518 to 438 kg m<sup>-3</sup>, respectively.</p>

scholarly journals Some physical properties of kariya (Hildegardia barteri) nut/ kernel relevant to the design of its processing equipment

2021 ◽  
Vol 7 (2) ◽  
pp. 083-090
Author(s):  
Ubong Edet Assian ◽  
Akindele Folarin Alonge
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Surface Area ◽  
Geometric Mean ◽  
Volume Density ◽  
Unit Mass ◽  
Sample Distribution ◽  
Processing Equipment ◽  
Mean Diameter

Kariya kernel is very rich in essential fats, oils and other valuable nutrients which may find applications in many food formulations. To harness these nutrients, processing equipment and machines are to be used. In order to effectively design these machines, the values of some physical properties of kariya nut and kernel are needed. In this study, some physical properties of the kariya nut and kernel were investigated. Results showed that mean major diameter, intermediate diameter, minor diameter and unit mass obtained at the nut moisture content of 19.83 ± 3.71 (w.b.) were 14.16 ± 0.79 mm, 10.17 ± 0.36 mm, 9.78 ± 0.28 mm and 0.503 ± 0.05g, respectively while the corresponding values obtained at the kernel moisture content of 8.89 ± 2.22% (w.b.) were 9.07 ±0.72 mm, 7.32 ±0.49 mm, 7.08 ± 0.41 mm and 0.328 ± 0.03 g, respectively. The values of calculated geometric mean diameter were 11.20 ±mm and 7.77 ± 0.36 mm, for the kariya nut and kernel, respectively. The skewness value of the sample distribution of 0.08 and -0.24 were recorded for the kariya nut and kernel, respectively. The sphericity, surface area, volume, density, bulk density and porosity were 79.27 ± 3.07%, 394.75 23.13 mm2, 738.37 ± 64.96 mm3 , 681.1 ± 20 kg/m3, 440.24 ± 0.04 kg/m3 and 36.65 ± 0.74% ; and 85.97 ± 5.27%, 189.85 ± 17.34 mm2, 246.71 ± 33.60 mm3, 1342.1 ± 136.23 kg/m3, 773.06 ± 0.06 kg/m3 and 42.28 ± 4.10% for the kariya nut and kernel respectively.

scholarly journals Effect of moisture content on some physical properties of Canarium schweinfurthii Engl. fruits

2016 ◽  
Vol 62 (No. 4) ◽  
pp. 162-169 ◽  
Author(s):  
J.C. Ehiem ◽  
V.I.O. Ndirika ◽  
U.N. Onwuka
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Geometric Mean ◽  
Physical Parameters ◽  
True Density ◽  
Effect Of Moisture ◽  
Mass Volume

The effect of moisture content on some physical properties of three varieties of Canarium schweinfurthii Engl. fruits (small, large and long) was studied at 40.91%, 34.92%, 23.44%, 18.5% and 11.03% moisture content on wet basis in order to solve problems associated with designing and development of processing and handling equipment for these fruits. The physical parameters investigated were major, intermediate, minor diameters, geometric mean diameter, unit mass, volume, sphericity, density, bulk density, roundness, aspect ratio, porosity, surface and specific surface area. The results obtained showed that the physical parameters decreased linearly with a decrease in moisture content. Major diameter and true density of all the fruit varieties were not affected significantly (P &lt; 0.05) by moisture content. Canarium schwein-furthii Engl. fruits are not round but spherical and oblong, hence, they can rather roll than slide. Among the studied varieties, small Canarium schweinfurthii Engl. is less bulky, has the highest specific surface area and is more porous.

scholarly journals Mechanical behaviour under compression loading and some physical parameters of Japanese quail (Coturnix coturnix japonica) eggs

2008 ◽  
Vol 52 (No. 2) ◽  
pp. 50-56 ◽  
Author(s):  
R. Polat ◽  
S. Tarhan ◽  
M. Çetin ◽  
U. Atay
Keyword(s):  
Surface Area ◽  
Coefficient Of Friction ◽  
Japanese Quail ◽  
Mechanical Behaviour ◽  
Geometric Mean ◽  
Compressive Force ◽  
Galvanized Steel ◽  
Physical Parameters ◽  
Rupture Force ◽  
Mean Diameter

Technical information and data on the physical and mechanical properties of agricultural and animal products are necessary to design various equipments for agriculture and industry. In this study some physical properties such as mass, length, diameter, geometric mean diameter, surface area, sphericity, volume, coefficient of friction and packaging coefficient were determined for Japanese quail eggs. Furthermore, the mechanical behaviour of Japanese quail eggs was determined in terms of average rupture force, deformation and toughness (energy absorbed by the Japanese quail eggs per unit volume). Egg samples were compressed along their <i>X</i> and <i>Z</i>-axes. The average values of their mass, length, width, shell thickness, geometric mean diameter, surface area, sphericity, volume and packaging coefficient were measured to be 12.69 g, 34.87 mm, 26.20 mm, 0.27 mm, 28.82 mm, 2 608.5 mm<sup>2</sup>, 1.10, 359.17 mm<sup>3</sup>, 0.469, respectively. The values of the coefficient of friction for quail eggs on the surfaces of plywood, glass, galvanized steel and fibreglass were 0.301, 0.282, 0.274 and 0.266, respectively. The highest rupture force, deformation and toughness were obtained when Japanese quail eggs were loaded along their X-axis. Compression along the <i>Z</i>-axis required the least compressive force to break the eggs as compared to the other compression axes. Rupture force, deformation, absorbed energy and toughness for the <i>X</i>-front axis were determined to be 10.51 N, 1.5 mm, 7.88 Nmm and 0.219 Mj/mm<sup>2</sup>, respectively.

MOISTURE-DEPENDENT PHYSICAL PROPERTIES OF MEDICAL TINY SEEDS: PART A: FLIXWEED (DESCURAINIA SOPHIA L.)

2021 ◽  
Vol 24 (1) ◽  
Author(s):  
Amir Hossein Mirzabe ◽  
◽  
Ali Fadavi ◽  
Ali Mansouri ◽  
◽  
...  
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Surface Area ◽  
Particle Density ◽  
Arithmetic Mean ◽  
Angle Of Repose ◽  
Projected Area ◽  
Angle Of Friction ◽  
Mean Diameter ◽  
Length Width

Knowledge of agricultural seeds’ physical properties has significant importance for machinery and processing equipment design. Physical properties of flixweed (Descur ainia sophia L.) seeds were determined as a function of moisture content. Several properties were studied in the moisture range from 5.28 to 17.53% dry basis. Also, probability distribution of seeds’ principal dimensions were modeled by Gamma, Generalized Extreme Value, Lognormal, and Weibull functions. With increasing moisture content from 5.28 to 17.53%, properties including; length, width, thickness, geometric and arithmetic mean diameter, sphericity, specific surface area, volume, and projected area showed no specific trend. In contrast, the surface area increased from 6×10-7 to 1×10-6 m2. The bulk and particle density decreased from 696.61 to 542.51 kg·m-3, and 1217.50 to 1189.02 kg·m-3, respectively. The porosity increased from 42.78 to 54.37%. The maximum external static angle of friction belonged to wood at all moisture content levels, followed by the iron and galvanized surfaces. At all moisture levels, the emptying angle of repose was more than the filling one.

Moisture Dependent Selected Engineering Properties of Deenanath Seeds in Relation to Development of Processing Machinery

2021 ◽  
Vol 58 (03) ◽  
pp. 250-261
Author(s):  
Sanjay Kumar Singh ◽  
Sheshrao Kautkar ◽  
P. K. Pathak ◽  
Bholuram Gurjar ◽  
Sunil Swami ◽  
...  
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Geometric Mean ◽  
Seed Mass ◽  
Correlation Coefficients ◽  
Engineering Properties ◽  
True Density ◽  
Linear Relationships ◽  
Mean Diameter ◽  
Length Width

Propagation of grasses through seeds is important in view of vigour and germination. Various grasses as Pennisetum pedicellatum Trin., Cenchrus ciliaris L., Chrysopogan fulvus have lower vigour and germination, due to which they need specific operations as defluffing, separation of true seeds, cleaning and grading by specific machines. In designing a machine for a specific use, physical properties and their behaviour with moisture play an important role. A study was conducted to assess the effect of moisture content at five levels [6.88 - 19.23 %, (d.b.)] on selected physical properties of defluffed Deenanath grass seed. The length, width, thickness, arithmetic mean diameter, and geometric mean diameter of defluffed Deenanath seed increased from 2.30 mm to 2.56 mm, 0.71 mm to 0.96 mm, 0.47 mm to 0.63 mm, 1.16 mm to 1.38 mm, and 0.90 mm to 1.15 mm, respectively, with increase in moisture content 6.88 % to 19.23 %. Bulk density, true density, and porosity decreased from 652.16 kg.m-3 to 585.78 kg.m-3, 852.63 kg.m-3 to 792.71 kg.m-3, and 25.62 % to 24.97 %, respectively, with increase in moisture content from 6.88 % to 19.23 per cent. The aspect ratio, sphericity, surface area, volume, and thousand-seed mass of the seed were in the range of 30.91 - 37.51 %, 0.39 - 0.45, 2.58 - 3.23 mm2 , 3.71 - 4.97 mm3 , and 0.480 - 0.523 g, respectively. Linear relationships with correlation coefficients higher than 0.90 were observed for the physical properties over the experimental range of moisture content.

scholarly journals Postharvest Chemical, Sensorial and Physical-Mechanical Properties of Wild Apricot (Prunus armeniaca L.)

2011 ◽  
Vol 3 (4) ◽  
pp. 105-112 ◽  
Author(s):  
Evica MRATINIĆ ◽  
Bojan POPOVSKI ◽  
Tomo MILOŠEVIĆ ◽  
Melpomena POPOVSKA
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Surface Area ◽  
Geometric Mean ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Soluble Solids Content ◽  
Mean Diameter ◽  
Length Width ◽  
Solids Content

Some chemical, sensorial and physical-mechanical properties of 19 apricot genotypes and Hungarian Best (control) such as moisture content, soluble solids content, titratable acidity ratio and their ratio, fruit and stone mass, flesh/stone ratio, fruit dimensions (length, width, thickness), arithmetic and geometric mean diameter, sphericity, surface area and aspect ratio were determined. Their application is also discussed. The highest moisture content and stone mass observed in X-1/1/04 and X-1/2/04, soluble solids content in ZO-1/03, titratable acidity in ZL-2/03, SS/TA ratio in ZL-1/03, and fruit mass and flesh/stone ratio in DL-1/1/04 genotype. The most number of genotypes have orange and deep orange skin and flesh colour, respectively, whereas sweet kernel taste was predominant in most genotypes. Regarding physical-mechanical properties, the superior fruit dimensions (length, width, thickness), arithmetic and geometric mean diameter and surface area observed in DL-1/1/04 genotype, whereas the highest sphericity and surface area observed in X-1/1/04 and X-1/2/04 genotypes. Also, the series of genotypes evaluated have better chemical, sensorial and physical-mechanical properties than Hungarian Best (control). Finally, information about these properties is very important for understanding the behaviour of the product during the postharvest operations.

scholarly journals Determination of Some Physical Properties of Dried Jujube Fruit

2017 ◽  
Vol 8 (2) ◽  
pp. 48
Author(s):  
Mansoureh Pourjafar
Keyword(s):  
Physical Properties ◽  
Coefficient Of Friction ◽  
Glass Surface ◽  
Geometric Mean ◽  
Galvanized Steel ◽  
Mean Values ◽  
Jujube Fruit ◽  
Fruit Samples ◽  
Mean Diameter ◽  
Length Width

<p>Some physical properties of Iranian Jujube fruit were evaluated. Jujube fruit samples mean values of length, width, thickness were found as 18.005mm, 14.96 mm, 15.26 mm. Arithmetic mean diameter, geometric mean diameter were found as 16.08mm, 16.01 respectively and surface area, Sphericity, porosity, mass, volume, bulk density and true density were also found as: 805.65 mm<sup>2</sup> ,89%, 77.2%, 1.45gr, 2.61 cm<sup>3</sup> , 0.23gr cm<sup>-3</sup>, 0.55gr cm<sup>-3</sup> respectively. Projected area perpendicular to length, width and thickness were measured as, 152.03 mm<sup>2</sup>, 220.02 mm<sup>2</sup>, 271.4mm<sup>2</sup> respectively. With comparison between friction coefficients on different surface for Jujube fruit. The results showed that the static coefficient of friction was more than dynamic coefficient of friction.The tests done on the galvanized steel surface, plywood and glass surface. The most coefficient of friction was found on the plywood surface and the least coefficient of friction was measured on the glass surface.</p>

scholarly journals Physical properties of cumin and caraway seeds

2013 ◽  
Vol 27 (4) ◽  
pp. 491-494 ◽  
Author(s):  
D. Zare ◽  
A. Bakhshipour ◽  
G. Chen
Keyword(s):  
Aspect Ratio ◽  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Geometric Mean ◽  
Equivalent Diameter ◽  
True Density ◽  
Mean Width ◽  
Mean Diameter ◽  
Constant Moisture Content

Abstract Physical properties of cumin and caraway seeds were measured and compared at constant moisture content of 7.5% w.b. The average thousand mass of grain, mean length, mean width, mean thickness, equivalent diameter, geometric mean diameter, surface area, volume, sphericity, aspect ratio, true density, bulk density and porosity were measured for cumin and caraway. There are significant differences (p<0.01) in most physical properties of cumin and caraway, except porosity and sphericity

Sign in / Sign up

Export Citation Format

Share Document