scholarly journals Improvement of the Production Process in the Industry 4.0 Context

2018 ◽  
Vol 1 (1) ◽  
pp. 55-62
Author(s):  
Sandra Grabowska
Keyword(s):  
Heat Treatment ◽  
Industry 4.0 ◽  
Industrial Revolution ◽  
Treatment Process ◽  
New Technologies ◽  
Rapid Development ◽  
Heat Treatment Process ◽  
Metallurgical Enterprise ◽  
Ishikawa Diagram ◽  
Intensity Of Competition

Abstract Dynamically changing conditions of business activity, rapid development of new technologies, increasing intensity of competition, progressing globalisation pose for entrepreneurs new, much more difficult principles than before, especially due to the increase of intensity and complexity of the environment. It is reflected in the necessity of continuous improvement of processes and their quick reorganisation. The aim of the article is to present research conducted in metallurgical enterprise. In the article individual stages of heat treatment process, taking into consideration complications, errors and quality defects of the product arising at the stage of manufacturing the product were described. In order to minimize resulting defects, quality improvement system was implemented, using, among others Ishikawa diagram. In view of the fact that the world stands on the threshold of next industrial revolution, directions of improvement of heat treatment process in the context of Industry 4.0 were indicated.

scholarly journals ANALYSIS OF THE CAUSES OF DISTORTION CASTINGS AFTER HEAT TREATMENT

2017 ◽  
Vol 23 (2) ◽  
pp. 182 ◽  
Author(s):  
Daniela Kalincová ◽  
Miroslava Ťavodová ◽  
Helena Čierna ◽  
Pavel Beňo
Keyword(s):  
Heat Treatment ◽  
Quality Management ◽  
Cylinder Head ◽  
Treatment Process ◽  
Heat Treatment Process ◽  
Management Tools ◽  
Research Results ◽  
Ishikawa Diagram

<p>The article is focused on the use of Quality Management tools to identify causes of formation deviations dimensions in cylinder head castings. Moreover,  methods of production of castings made from alloy AlSi9Cu1,  heat treatment of castings, as well as requirements of their quality are described. Research of the influence heat treatment parameters on the changes of castings' dimensions, with using Quality Management tools (Ishikawa diagram) is described too. In order to optimize the process for eliminate of deviations,  experiment for modelling  parameters of heat treatment was designed. The results processed in the Pareto diagram clearly pointed out the causes. Dimensional deviations were created during the heat treatment process. We have found the largest distortions in castings were created during rapid cooling.The article gives important information about using of research results in the production of cylinder head castings.</p>

Optimization of Heat Treatment Process of ZE41A Magnesium Alloy Using Grey- Based Taguchi Method

2008 ◽  
Vol 3 (2) ◽  
pp. 63-69
Author(s):  
M. Sivapragash ◽  
◽  
V. Sateeshkumar ◽  
P.R. Lakshminarayanan ◽  
R. Karthikeyan ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Magnesium Alloy ◽  
Taguchi Method ◽  
Treatment Process ◽  
Heat Treatment Process

EFFECT ON HARDNESS and MICRO STRUCTURAL BEHAVIOUR OF TOOL STEEL AFTER HEAT TREATMENT PROCESS

2017 ◽  
Vol 4 (24) ◽  
Author(s):  
Karanbir Singh ◽  
Aditya Chhabra ◽  
Vaibhav Kapoor ◽  
Vaibhav Kapoor
Keyword(s):  
Heat Treatment ◽  
Empirical Study ◽  
Tool Steel ◽  
Treatment Process ◽  
Heat Treatment Process ◽  
Structural Behaviour ◽  
Treatment Processes ◽  
En 31

This study is conducted to analyze the effect on the Hardness and Micro Structural Behaviour of three Sample Grades of Tool Steel i.e. EN-31, EN-8, and D3 after Heat Treatment Processes Such As Annealing, Normalizing, and Hardening and Tempering. The purpose of Selecting Tool Steel is Because Tool Steel is Mostly Used in the Manufacturing Industry.This study is based upon the empirical study which means it is derived from experiment and observation rather than theory.

Emerging Industrial Revolution: Symbiosis of Industry 4.0 and Circular Economy: The Role of Universities

2020 ◽  
Vol 25 (3) ◽  
pp. 505-525 ◽  
Author(s):  
Seeram Ramakrishna ◽  
Alfred Ngowi ◽  
Henk De Jager ◽  
Bankole O. Awuzie
Keyword(s):  
Economic Growth ◽  
Circular Economy ◽  
Industry 4.0 ◽  
Business Models ◽  
Industrial Revolution ◽  
New Technologies ◽  
Production Systems ◽  
Fourth Industrial Revolution ◽  
New Jobs

Growing consumerism and population worldwide raises concerns about society’s sustainability aspirations. This has led to calls for concerted efforts to shift from the linear economy to a circular economy (CE), which are gaining momentum globally. CE approaches lead to a zero-waste scenario of economic growth and sustainable development. These approaches are based on semi-scientific and empirical concepts with technologies enabling 3Rs (reduce, reuse, recycle) and 6Rs (reuse, recycle, redesign, remanufacture, reduce, recover). Studies estimate that the transition to a CE would save the world in excess of a trillion dollars annually while creating new jobs, business opportunities and economic growth. The emerging industrial revolution will enhance the symbiotic pursuit of new technologies and CE to transform extant production systems and business models for sustainability. This article examines the trends, availability and readiness of fourth industrial revolution (4IR or industry 4.0) technologies (for example, Internet of Things [IoT], artificial intelligence [AI] and nanotechnology) to support and promote CE transitions within the higher education institutional context. Furthermore, it elucidates the role of universities as living laboratories for experimenting the utility of industry 4.0 technologies in driving the shift towards CE futures. The article concludes that universities should play a pivotal role in engendering CE transitions.

Failure Analysis on a Counterweight Assembly of an Aeroengine

2011 ◽  
Vol 339 ◽  
pp. 342-348
Author(s):  
Hai Jun Tang ◽  
Hong Yu Yao
Keyword(s):  
Heat Treatment ◽  
Stress Concentration ◽  
Failure Analysis ◽  
Failure Mechanism ◽  
Treatment Process ◽  
Hardness Test ◽  
Heat Treatment Process ◽  
Material Loss ◽  
Structure Strength ◽  
Crucial Part

The paper presents a failure analysis on a counterweight assembly installed on crank shaft which resulted in an in-flight shutdown of a piston aeroengine. The counterweight assembly failure includes counterweight block material loss and fractured washer which is the most crucial part for in-flight shutdown in this type of aeroengine. Macro observation, fractography analysis, metallography analysis and hardness test were conducted on the failed counterweight assembly. The result shows that failure mechanism of counterweight block and washer is fatigue. The washer failure is likely due to inappropriate heat treatment process and continuous impact in flight by slightly tilted roller. Counterweight material loss is attributed to stress concentration, low structure strength and impact came from the tilted roller. Finally some safety suggestion on design and maintenance is given.

Relationship of Microstructure and Mechanical Properties in Er-Containing Aluminum Alloy

2015 ◽  
Vol 1120-1121 ◽  
pp. 1109-1114
Author(s):  
Xin Lei ◽  
Hui Huang ◽  
S.P. Wen
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
Treatment Process ◽  
Mg Alloys ◽  
The Other ◽  
Heat Treatment Process ◽  
Comprehensive Performance ◽  
Relationship Of ◽  
Al Mg Alloys

This study investigated the mechanical properties and microstructures of Er-containing Al–Mg alloys. The research found that the H114-T sheet of Er-containing Al–Mg alloys showed a relative good comprehensive performance in mechanical properties. With the special rolling and heat treatment process, this H114-T sheet showed different morphology of microstructures with the other sheets in Er-containing Al–Mg alloys. Grains in H114-T sheet performed irregular shape polygon, a number of subgrains appeared in grains, the amount of dislocations in grains decreased. H114-T sheet possessed a lot of Copper texture, this may be one of important factors influenced the mechanical properties.

Network Carbide Inheritance during Heat Treatment Process of Large Shield Machine Bearing Steel GCr15SiMn

2015 ◽  
Vol 817 ◽  
pp. 115-120 ◽  
Author(s):  
Dan Zhang ◽  
Le Yu Zhou ◽  
Chao Lei Zhang ◽  
Chao Huang ◽  
Min Zhao ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Treatment Process ◽  
Bearing Steel ◽  
Treatment Temperature ◽  
Heat Treatment Process ◽  
Soaking Time ◽  
Hot Rolled ◽  
Chinese Standard ◽  
Shield Machine ◽  
Quenching And Tempering

Network carbide inheritance during heat treatment process of large shield machine bearing steel GCr15SiMn was investigated by heat treatment experiments and quantitative metallographic. Samples with the proeutectoid cementite network thickness in the range of 0.19~0.54 μm were obtained by changing austenitizing temperature and soaking time of pearlite transformation. The results show that the network in hot rolled bar can be improved when the pre-heat treatment temperature is 950 °C. When the network thickness is above 0.40 μm, the undissolved cementite networks present in microstructures after quenching and tempering. In a Chinese standard, the network grades are 1.5 and 3.0 degree when the networks thickness are 0.40 μm and 0.54 μm, respectively. The critical network thickness that can be eliminated by heat treatment is 0.29 μm.

Sign in / Sign up

Export Citation Format

Share Document