scholarly journals Transport of Heavy Oil by Applying of Solar Energy

2021 ◽  
Vol 25 (1) ◽  
pp. 879-893
Author(s):  
Мaral Abdibattayeva ◽  
Kylyshbay Bissenov ◽  
Gulzat Askarova ◽  
Nurila Togyzbayeva ◽  
Gulmira Assanova
Keyword(s):  
Pressure Drop ◽  
Solar Energy ◽  
Crude Oil ◽  
Tracking System ◽  
High Energy ◽  
Energy Costs ◽  
Heavy Oils ◽  
Environmental Friendliness ◽  
Oil Transportation ◽  
Solar Station

Abstract Crude oil is considered the main source of energy worldwide. Important problems faced by oil transportation methods are spills and unintended releases. Therefore, most technological developments in the field of transportation methods are aimed at reducing emissions, improving efficiency or preventing spills and leaks. Pipeline systems are the safest, most efficient and economical way to transport crude oil. The transportation process suffers from serious problems, such as: asphaltene and paraffin interacting with the structure damages it, pressure drop in the pipes and high energy consumption during pumping. One of the most important economic tasks when transporting oil through a pipeline is to maintain fluidity and reduce the pressure drop along the pipe. This article highlights the latest and most effective development methods that were used to increase the fluidity of crude oil in pipelines, and also examines the possibilities of reducing energy costs for transporting heavy oils and hydraulic resistance of pipelines by creating intermediate solar station devices consisting of a parabolocylindrical concentrator with a tracking system and a solar panel with a converter that increase the safety and environmental friendliness of oil transportation by reducing the risk of accidents. The intermediate solar station uses a renewable energy source and is clean from an environmental point of view, since it does not produce harmful emissions. The use of solar energy as a green alternative to traditional energy carriers makes it possible to increase the productivity of the pipeline by up to 50 %, eliminate energy costs during oil transportation.

scholarly journals Solar PV for Water Pumping and Irrigation

2015 ◽  
Vol 11 (1) ◽  
pp. 9-28
Author(s):  
I. Patay ◽  
M. Montvajszki
Keyword(s):  
Solar Energy ◽  
Energy Demand ◽  
Electric Energy ◽  
High Energy ◽  
Energy Costs ◽  
Solar Pv ◽  
Irrigation Period ◽  
Water Pumping ◽  
Pump Station ◽  
The World

Water pumping for irrigation has a relatively high energy demand, depending on the applied irrigation method. At the same time, there is a considerable energy from the sun during the irrigation period. The solar PV (photovoltaic) technology may be suitable to ensure electric energy for pumping in many cases in agriculture, where the electric network is not available or reduction of the energy costs is wanted. There are some pilot plants for water pumping on the base of solar energy in the world and the spreading of these solar technologies is predictable. The solar energy based pumping process can be approached both in theoretical and experimental ways. In this paper, both the theoretical questions of the solar based pumping process and the experimental results of a model testing pump station powered by PV panels are shown.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Additional methods to improve the energy efficiency of oil pipeline transportation

2020 ◽  
Vol 10 (5) ◽  
pp. 558-565
Author(s):  
Marat R. Lukmanov ◽  
◽  
Sergey L. Semin ◽  
Pavel V. Fedorov ◽  
◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Pipeline System ◽  
Energy Costs ◽  
Improvement Program ◽  
Oil Pipeline ◽  
Energy Efficiency Improvement ◽  
Oil Transportation ◽  
Pumping Equipment ◽  
Preparatory Work

The challenges of increasing the energy efficiency of the economy as a whole and of certain production sectors in particular are a priority both in our country and abroad. As part of the energy policy of the Russian Federation to reduce the specific energy intensity of enterprises in the oil transportation system, Transneft PJSC developed and implements the energy saving and energy efficiency improvement Program. The application of energy-saving technologies allowed the company to significantly reduce operating costs and emissions of harmful substances. At the same time, further reduction of energy costs is complicated for objective reasons. The objective of this article is to present additional methods to improve the energy efficiency of oil transportation by the example of the organizational structure of Transneft. Possibilities to reduce energy costs in the organization of the operating services, planning and execution of work to eliminate defects and preparatory work for the scheduled shutdown of the pipeline, the use of pumping equipment, including pumps with variable speed drive, the use of various pipelines layouts, changing the volume of oil entering the pipeline system and increase its viscosity.

Study on the pressure drop of crude oil-water with surfactant flow in porous media

2021 ◽  
pp. 1-7
Author(s):  
Huijun Zhao ◽  
Xiang Ding ◽  
Pengfei Yu ◽  
Yun Lei ◽  
Xiaofei Lv ◽  
...  
Keyword(s):  
Porous Media ◽  
Pressure Drop ◽  
Crude Oil ◽  
Flow In Porous Media ◽  
Oil Water

scholarly journals From natural to artificial photosynthesis

2013 ◽  
Vol 10 (81) ◽  
pp. 20120984 ◽  
Author(s):  
James Barber ◽  
Phong D. Tran
Keyword(s):  
Solar Energy ◽  
Large Scale ◽  
Nuclear Fusion ◽  
Fusion Energy ◽  
High Energy ◽  
Primary Energy ◽  
Energy Resources ◽  
High Energy Density ◽  
Chemical Bonds ◽  
Natural Photosynthesis

Demand for energy is projected to increase at least twofold by mid-century relative to the present global consumption because of predicted population and economic growth. This demand could be met, in principle, from fossil energy resources, particularly coal. However, the cumulative nature of carbon dioxide (CO 2 ) emissions demands that stabilizing the atmospheric CO 2 levels to just twice their pre-anthropogenic values by mid-century will be extremely challenging, requiring invention, development and deployment of schemes for carbon-neutral energy production on a scale commensurate with, or larger than, the entire present-day energy supply from all sources combined. Among renewable and exploitable energy resources, nuclear fusion energy or solar energy are by far the largest. However, in both cases, technological breakthroughs are required with nuclear fusion being very difficult, if not impossible on the scale required. On the other hand, 1 h of sunlight falling on our planet is equivalent to all the energy consumed by humans in an entire year. If solar energy is to be a major primary energy source, then it must be stored and despatched on demand to the end user. An especially attractive approach is to store solar energy in the form of chemical bonds as occurs in natural photosynthesis. However, a technology is needed which has a year-round average conversion efficiency significantly higher than currently available by natural photosynthesis so as to reduce land-area requirements and to be independent of food production. Therefore, the scientific challenge is to construct an ‘artificial leaf’ able to efficiently capture and convert solar energy and then store it in the form of chemical bonds of a high-energy density fuel such as hydrogen while at the same time producing oxygen from water. Realistically, the efficiency target for such a technology must be 10 per cent or better. Here, we review the molecular details of the energy capturing reactions of natural photosynthesis, particularly the water-splitting reaction of photosystem II and the hydrogen-generating reaction of hydrogenases. We then follow on to describe how these two reactions are being mimicked in physico-chemical-based catalytic or electrocatalytic systems with the challenge of creating a large-scale robust and efficient artificial leaf technology.

scholarly journals Bacterial growth laws reflect the evolutionary importance of energy efficiency

2014 ◽  
Vol 112 (2) ◽  
pp. 406-411 ◽  
Author(s):  
Arijit Maitra ◽  
Ken A. Dill
Keyword(s):  
Energy Efficiency ◽  
Bacterial Growth ◽  
Growth Conditions ◽  
High Energy ◽  
Fast Growth ◽  
Growth Speed ◽  
Energy Costs ◽  
Extensive Literature ◽  
E Coli ◽  
Growth Laws

We are interested in the balance of energy and protein synthesis in bacterial growth. How has evolution optimized this balance? We describe an analytical model that leverages extensive literature data on growth laws to infer the underlying fitness landscape and to draw inferences about what evolution has optimized inEscherichia coli. IsE. colioptimized for growth speed, energy efficiency, or some other property? Experimental data show that at its replication speed limit,E. coliproduces about four mass equivalents of nonribosomal proteins for every mass equivalent of ribosomes. This ratio can be explained if the cell’s fitness function is the the energy efficiency of cells under fast growth conditions, indicating a tradeoff between the high energy costs of ribosomes under fast growth and the high energy costs of turning over nonribosomal proteins under slow growth. This model gives insight into some of the complex nonlinear relationships between energy utilization and ribosomal and nonribosomal production as a function of cell growth conditions.

Sign in / Sign up

Export Citation Format

Share Document