scholarly journals Influence of Hybrid Fibers on Toughness Behavior of High Strength Flowing Concrete

2011 ◽  
Vol 57 (3) ◽  
pp. 249-260 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Hybrid Composite ◽  
High Strength ◽  
Steel Fibers ◽  
Hybrid Fibers ◽  
Static Modulus ◽  
Static Modulus Of Elasticity ◽  
Strength And Toughness

Abstract This study investigates the use of steel fibers and hybrid composite with a total fibers content of 2% on the high strength flowing concrete and determines the density, compressive strength, static modulus of elasticity, flexural strength and toughness indices for the mixes. The results show that the inclusion of more than 0.5% of palm fibers in hybrid fibers mixes reduces the compressive strength. The hybrid fibers can be considered as a promising concept and the replacement of a portion of steel fibers with palm fibers can significantly reduce the density, enhance the flexural strength and toughness. The results also indicates that the use of hybrid fibers (1.5 steel fibers + 0.5% palm fibers) in specimens increases significantly the toughness indices and thus the use of hybrid fibers combinations in reinforced concrete would enhance their flexural toughness & rigidity and enhance their overall performances

scholarly journals Evolution of Durable High-Strength Flowable Mortar Reinforced with Hybrid Fibers

2012 ◽  
Vol 2012 ◽  
pp. 1-10
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
High Strength ◽  
Experimental Tests ◽  
Steel Fibers ◽  
Synthetic Fiber ◽  
Hybrid Fibers ◽  
Static Modulus ◽  
Static Modulus Of Elasticity

The production and use of durable materials in construction are considered as one of the most challenging things for the professional engineers. Therefore, this research was conducted to investigate the mechanical properties and the durability by using of different percentages of steel fiber with high-strength flowable mortar (HSFM) and also the use of the hybridization of steel fibers, palm fibers, and synthetic fiber (Barchip). Different experimental tests (compressive strength, splitting tensile strength, flexural strength, and static modulus of elasticity among others) were determined after 90 days of normal water curing and 180 days of seawater exposure. The results indicate that hybrid fibers of 1.5% steel fibers + 0.25% palm fibers + 0.25% Barchip fibers provide significant improvement in the different mechanical properties of HSFM. Besides, the hybridization of fibers was found to be effective in the terms of durability (exposure to seawater). Therefore, the minimum reduction in static modulus of elasticity, compressive, splitting and flexural strength was obtained for the HSFM mixes of hybrid fibers using steel fibers with palm fibers and also for the use of steel, palm, and Barchip fibers.

scholarly journals High-strength flowable mortar reinforced by steel fiber

2011 ◽  
Vol 19 (3) ◽  
pp. 10-16 ◽  
Author(s):  
M. Ramli ◽  
E. Dawood
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Steel Fiber ◽  
High Strength ◽  
Fiber Content ◽  
Flexural Toughness ◽  
Static Modulus ◽  
Static Modulus Of Elasticity

High-strength flowable mortar reinforced by steel fiberAn experimental study was conducted on High-Strength Flowable Mortar (HSFM) reinforced at different percentages of steel fiber (0, 0.25, 0.5, 0.75, 1.0, 1.25, 1.5, 1.75 and 2.0% as volumetric fractions) to determine the density, compressive strength, static modulus of elasticity and flexural strength. The load-deflection curves under a static flexural load were established, and the flexural toughness indices were obtained in accordance with ASTM C1018. The results indicate that by increasing the fiber content up to 1.75%, the flexural strength and toughness indices are increased. The density, compressive strength and static modulus of elasticity also increased using steel fiber.

Production of Durable High Strength Flowable Mortar Reinforced With Hybrid Fibers

2018 ◽  
Vol 9 (1) ◽  
pp. 10 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Silica Fume ◽  
Impact Load ◽  
Activity Index ◽  
High Strength ◽  
Steel Fibers ◽  
Partial Replacement ◽  
Hybrid Fibers ◽  
Synthetic Fibers ◽  
Static Modulus ◽  
Static Modulus Of Elasticity

This study deals with the production of durable high strength flowable mortar (HSFM). Firstly, the optimum percentage of silica fume was determined due to Pozzolanic Activity Index (P.A.I) test. Secondly, the selected mortar reinforced by different percentages of steel fibers or hybrid fibers of  steel fibers , palm fibers and synthetic fibers (Barchip) to prepare HSFM mixes. Such mixes were tested in compressive strength, splitting tensile strength, static modulus of elasticity, flexural strength, toughness indices determination, and impact load for all the mixes. Lastly, the effects of seawater exposure on the properties of HSFM have been observed. The results show that the use of 10% silica fume as a partial replacement of cement indicate the best P.A.I. On the other hand, the hybridizations of such fibers enhance the performance of HSFM mixes. In addition, the hybrid fibers reduce the permeability of HSFM leading to significance improvement against seawater exposure.

scholarly journals Properties of High-Strength Flowable Mortar Reinforced with Palm Fibers

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Test Results ◽  
Palm Fiber ◽  
Toughness Index ◽  
Strength And Toughness

This study was conducted to determine some physical and mechanical properties of high-strength flowable mortar reinforced with different percentages of palm fiber (0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, and 1.6% as volumetric fractions). The density, compressive strength, flexural strength, and toughness index were tested to determine the mechanical properties of this mortar. Test results illustrate that the inclusion of this fiber reduces the density of mortar. The use of 0.6% of palm fiber increases the compressive strength and flexural strength by about 15.1%, and 16%, respectively; besides, the toughness index (I5) of the high-strength flowable mortar has been significantly enhanced by the use of 1% and more of palm fiber.

scholarly journals Investigation of the Match Relation between Steel Fiber and High-Strength Concrete Matrix in Reactive Powder Concrete

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1751 ◽  
Author(s):  
Guangyao Yang ◽  
Jiangxiong Wei ◽  
Qijun Yu ◽  
Haoliang Huang ◽  
Fangxian Li
Keyword(s):  
Compressive Strength ◽  
Steel Fiber ◽  
High Strength ◽  
Steel Fibers ◽  
Peak Strength ◽  
Reactive Powder Concrete ◽  
Medium Length ◽  
Reactive Powder ◽  
Concrete Matrix ◽  
Strength And Toughness

This study investigated the strength and toughness of reactive powder concrete (RPC) made with various steel fiber lengths and concrete strengths. The results indicated that among RPC samples with strength of 150 MPa, RPC reinforced with long steel fibers had the highest compressive strength, peak strength, and toughness. Among the RPC samples with strength of 270 MPa, RPC reinforced with short steel fibers had the highest compressive strength, and peak strength, while RPC reinforced with medium-length steel fibers had the highest toughness. As a result of the higher bond adhesion between fibers and ultra-high-strength RPC matrix, long steel fibers were more effective for the reinforcement of RPC with strength of 150 MPa, while short steel fibers were more effective for the reinforcement of RPC with strength of 270 MPa.

Experimental Analysis of the Development of Compressive Strength, Modulus of Elasticity and Acoustic Emission Parameters of Alkali-Activated Composites

2018 ◽  
Vol 760 ◽  
pp. 266-271
Author(s):  
Dalibor Kocáb ◽  
Libor Topolář ◽  
Vlastimil Bílek Jr. ◽  
Barbara Kucharczyková ◽  
Michaela Hoduláková ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Acoustic Emission ◽  
Modulus Of Elasticity ◽  
Stress Test ◽  
Ultrasonic Pulse ◽  
Static Modulus ◽  
Activated Slag ◽  
Static Modulus Of Elasticity ◽  
Non Destructive ◽  
Alkali Activated

This paper describes an experiment focused on monitoring the development of the modulus of elasticity and the compressive strength of composites that are based on alkali‑activated slag (AAS) during the first 28 days of ageing. The test specimens were tested at the age of 3 and 28 days using two non-destructive methods (ultrasonic pulse and resonance methods) to determine the value of the dynamic modulus of elasticity. Subsequently, the same specimens were used to determine the static modulus of elasticity using compressive stress test, during which the behaviour of the composite was monitored by equipment for recording the acoustic emission in the material. The result of the experiment is the evaluation of the behaviour of the AAS composite in regard to the development of its modulus of elasticity and compressive strength, as well as in regard to the acoustic emission method during loading.

Sign in / Sign up

Export Citation Format

Share Document