scholarly journals Pemampatan Citra Pas Foto dengan Menggunakan Algoritma Kompresi Joint-Photograpic Experts Group (JPEG) dan Principal Component Analysis (PCA)

2018 ◽  
Vol 17 (1) ◽  
pp. 102
Author(s):  
M. Azman Maricar ◽  
Oka Widyantara
Keyword(s):  
Principal Component Analysis ◽  
Mean Square Error ◽  
Signal To Noise Ratio ◽  
Principal Component ◽  
Component Analysis ◽  
Mean Square ◽  
Signal To Noise ◽  
Noise Ratio

Penelitian ini bertujuan untuk membandingkan hasil kompresi dari algoritma Joint-Photograpic Experts Group (JPEG) dan Principal Component Analysis (PCA) terhadap citra pas foto, guna menemukan hasil terbaik dari hasil citra kompresi yang kualitas hasilnya tidak berbeda jauh dengan citra aslinya. Alat ukur yang digunakan adalah Mean Square Error (MSE) dan Peak Signal to Noise Ratio (PSNR). Hasil yang diperoleh dalam penelitian ini adalah rata-rata MSE dan PNSR algoritma PCA dapat dikatakan tinggi jika dibandingkan dengan algoritma JPEG. Namun dari segi kualitas citra yang dihasilkan tidak jauh berbeda dengan algoritma JPEG.Dapat dikatakan bahwa algoritma JPEG mampu menghasilkan citra yang lebih baik dibandingkan algoritma PCA. Namun, algoritma PCA tidaklah buruk untuk dijadikan alternatif dalam kompresi citra pas foto.

scholarly journals Near-field sound source localization using principal component analysis–multi-output support vector regression

2020 ◽  
Vol 16 (4) ◽  
pp. 155014772091640
Author(s):  
Lanmei Wang ◽  
Yao Wang ◽  
Guibao Wang ◽  
Jianke Jia
Keyword(s):  
Principal Component Analysis ◽  
Support Vector Regression ◽  
Covariance Matrix ◽  
Signal To Noise Ratio ◽  
Near Field ◽  
Principal Component ◽  
Component Analysis ◽  
Support Vector ◽  
Signal To Noise ◽  
Noise Ratio

In this article, principal component analysis method, which is applied to image compression and feature extraction, is introduced into the dimension reduction of input characteristic variable of support vector regression, and a method of joint estimation of near-field angle and range based on principal component analysis dimension reduction is proposed. Signal-to-noise ratio and calculation amount are the decisive factors affecting the performance of the algorithm. Principal component analysis is used to fuse the main characteristics of training data and discard redundant information, the signal-to-noise ratio is improved, and the calculation amount is reduced accordingly. Similarly, support vector regression is used to model the signal, and the upper triangular elements of the signal covariance matrix are usually used as input features. Since the covariance matrix has more upper triangular elements, training it as a feature input will affect the training speed to some extent. Principal component analysis is used to reduce the dimensionality of the upper triangular element of the covariance matrix of the known signal, and it is used as the input feature of the multi-output support vector regression machine to construct the near-field parameter estimation model, and the parameter estimation of unknown signal is herein obtained. Simulation results show that this method has high estimation accuracy and training speed, and has strong adaptability at low signal-to-noise ratio, and the performance is better than that of the back-propagation neural network algorithm and the two-step multiple signal classification algorithm.

Enhancing the Signal-to-Noise Ratio of X-ray Diffraction Profiles by Smoothed Principal Component Analysis

2005 ◽  
Vol 77 (20) ◽  
pp. 6563-6570 ◽  
Author(s):  
Zeng Ping Chen ◽  
Julian Morris ◽  
Elaine Martin ◽  
Robert B. Hammond ◽  
Xiaojun Lai ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Signal To Noise Ratio ◽  
Principal Component ◽  
Component Analysis ◽  
X Ray Diffraction ◽  
Signal To Noise ◽  
X Ray ◽  
Noise Ratio

scholarly journals Improvement of Fast Kurtogram Combined with PCA for Multiple Weak Fault Features Extraction

Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1059
Author(s):  
Yongxing Song ◽  
Jingting Liu ◽  
Linhua Zhang ◽  
Dazhuan Wu
Keyword(s):  
Principal Component Analysis ◽  
Signal To Noise Ratio ◽  
Principal Component ◽  
Component Analysis ◽  
Rotating Machinery ◽  
Features Extraction ◽  
Signal To Noise ◽  
Fault Features ◽  
Weak Fault ◽  
Noise Ratio

Demodulation plays an important role in fault feature extraction for rotating machinery. The fast kurtogram method was proved to be effective for rotating machinery demodulation. However, the demodulation effectiveness of fast kurtogram was poor for multiple fault features extraction under low signal-to-noise ratio. In this paper, an improved method of fast kurtogram, called P-kurtogram, is presented. The proposed method extracted the multiple weak fault features from multiple envelope signals-based principal component analysis. Compared with extracting features from one envelope signal of fast kurtogram, P-kurtogram showed a better demodulation performance for multiple faults. Combined with principal component analysis method, the proposed method also showed a good performance under low signal-to-noise ratio(SNR). By simulation analysis, the P-kurtogram method showed good performance for multiple modulation features extraction and robust performance in demodulation under low SNR. Then, the proposed method was demonstrated by applications of bearing faults detection and propeller detection. The results verified that the P-kurtogram has a better demodulation performance than fast kurtogram for multiple weak fault features extraction, especially under low signal-to-noise ratio. The proposed method provides a reliable basis for multiple weak fault features extraction of rotating machinery.

scholarly journals An Image Steganography Algorithm using Fractional Discrete Wavelet Transform with Advanced Encryption System

2020 ◽  
Vol 9 (5) ◽  
pp. 541-546
Keyword(s):  
Wavelet Transform ◽  
Discrete Wavelet Transform ◽  
Mean Square Error ◽  
Signal To Noise Ratio ◽  
Image Steganography ◽  
Discrete Wavelet ◽  
Mean Square ◽  
Signal To Noise ◽  
Noise Ratio

The research constitutes a distinctive technique of steganography of image. The procedure used for the study is Fractional Random Wavelet Transform (FRWT). The contrast between wavelet transform and the aforementioned FRWT is that it comprises of all the benefits and features of the wavelet transform but with additional highlights like randomness and partial fractional value put up into it. As a consequence of the fractional value and the randomness, the algorithm will give power and a rise in the surveillance layers for steganography. The stegano image will be acquired after administrating the algorithm which contains not only the coated image but also the concealed image. Despite the overlapping of two images, any diminution in the grade of the image is not perceived. Through this steganographic process, we endeavor for expansion in surveillance and magnitude as well. After running the algorithm, various variables like Mean Square Error (MSE) and Peak Signal to Noise ratio (PSNR) are deliberated. Through the intended algorithm, a rise in the power and imperceptibility is perceived and it can also support diverse modification such as scaling, translation and rotation with algorithms which previously prevailed. The irrefutable outcome demonstrated that the algorithm which is being suggested is indeed efficacious.

scholarly journals Analysis and Implementation of Enhanced Image Inpainting method using adjustable patch sizes

2021 ◽  
Vol 9 (3) ◽  
pp. 310-317
Keyword(s):  
Mean Square Error ◽  
Patch Size ◽  
Signal To Noise Ratio ◽  
Image Inpainting ◽  
Absolute Difference ◽  
Mean Square ◽  
Patch Selection ◽  
Signal To Noise ◽  
Distance Method ◽  
Noise Ratio

Image inpainting is the process of reconstruction of the damaged image and removal of unwanted objects in an image. In the image inpainting process patch priority andselection of best patch playsa major role. The patch size is also considered for producing good results in the image inpainting. In this paper patch priority is obtained by introducing a regularization factor (ɷ). The best patch selection is acquired by using the Sum of Absolute Difference (SAD) distance method. The results of inpainting are investigated with adjustable patch sizes of 5×5, 7×7, 9×9, 11×11, and 13×13 for the proposed method. The performance of these adjustable patch sizes is observed by using Peak Signal to Noise Ratio (PSNR) and Mean Square Error (MSE). The best suitable patch size for good inpainting is announced based on the values of PSNR and MSE.

Sign in / Sign up

Export Citation Format

Share Document