Sedimentological control of the terrigenous reservoir rocks properties of the Tyumen suite in the west of Ob region

Author(s):  
M.V. Rykus ◽  
◽  
D.D. Suleymanov ◽  
◽  
Keyword(s):  
The West ◽  
2015 ◽  
pp. 26-30
Author(s):  
A. V. Podnebesnykh ◽  
S. V. Kuznetsov ◽  
V. P. Ovchinnikov

On the example of the group of fields in the West Siberia North the basic types of secondary changes in reservoir rocks are reviewed. Some of the most common types of such changes in the West Siberian plate territory include the processes of zeolitization, carbonation and leaching. These processes have, as a rule, a regional character of distribution and are confined to the tectonically active zones of the earth's crust. Due to formation of different mineral paragenesises the secondary processes differently affect the reservoir rocks porosity and permeability: thus, zeolitization and carbonization promote to reducing the porosity and permeability and leaching improvement. All this, ultimately leads to a change of the oil recovery factor and hydrocarbons production levels. Study and taking into account of the reservoir rocks secondary change processes can considerably influence on placement of operating well stock and on planning of geological and technological actions.


2014 ◽  
Vol 17 (3) ◽  
pp. 21-26
Author(s):  
Toan Minh Ho ◽  
Phuong Kim Lieu ◽  
Thuy Thi Doan ◽  
Phuong Thi Ngoc Bui

Porosity and permeability play a prerequisite role for hydrocarbon reservoirs and fluid flows, especially in sandstone reservoir rocks. The rocks with high porosity decrease down to lower porosity with increasing burial depth due to compaction, cementation and precipitation of authigenic minerals in pores from over saturated solution of minerals. The detailed study of the authigenic clay mineral formation in pore spaces of sandstone reservoir rocks is therefore crucial to estimate the degree of reservoir rock quality. In this study 20 sandstone cores taken from the interval burial depths of 3,700 m - 4,200 m from Oligocene sandstone sequence of a well in the West of the Cuu Long basin, offshore Vietnam, were analyzed by SEM and thin section. Authigenic clay minerals were formed due to temperature and chemistry changes and owing to dissolution of less stable minerals in these burial depths. Authigenic chlorite mineral appears quite abundantly and illite is less frequently. Chlorite was formed from the elements Al and Si, which were released from dissolved grains and Fe and Mg supplied from breakdown of the ferromagnesian minerals of rock fragments and matrix components into pore waters in the burial stage. Illite is associated with the expense of grain dissolution of feldspar, volcanic fragment. Chlorite mostly appears as a coating or mats comprising of small pseudo-hexagonal crystals arranged perpendicular to detrital grain surfaces. Grainrimming chlorites on quartz grain are responsible for the preservation of the porosity in the sandstones because they limit the formation of quartz overgrowth. Additionally fibrous or flaky illite bridging the pores between the grains creates permeability barriers to fluid flows through the sandstones. Thus illite significantly reduces the permeability but to lesser extent affect porosity. Locally, smectite mixes with illite or chlorite and is not abundant in the studied samples. It therefore has no significant impact on the porosity and permeability as well. The variations of the porosity and the permeability of the studied sandstones depend on the generated degree and the arranged patterns of chlorite and illite in pore spaces.


2015 ◽  
pp. 15-19
Author(s):  
A. V. Podnebesnykh ◽  
V. P. Ovchinnikov

The paper discusses the main causes of inclined oil-water contacts occurrence in the deposits Strezhevskoye and Krapivinskoe of the West Siberian plate, confined to the deposits of Vasyugan formation. The authors believe that the main reasons for the inclined oil-water contacts occurrence are the heterogeneity of the reservoir rocks lithofacies characteristics, regional hydrodynamic pressure of reservoir waters and the imposed catagenesis during the oil deposits formation. For this purpose, the facial analysis of the productive deposits was conducted and the data on reservoir permeability were used.


2017 ◽  
pp. 58-66 ◽  
Author(s):  
A. B. Tugareva ◽  
G. A. Chernova ◽  
N. P. Yakovleva ◽  
M. L. Moroz

In the presented work the features of the geological structure and oil and gas potential of the pre-Jurassic basement rocks are discussed. In the sediments of the oil and gas bearing horizon of zone of contact five types of reservoir rocks are distinguished. The greatest prospects for oil and gas potential are associated with the carbonate depositions of the Middle Paleozoic and effusive of the medium-acidic composition of the Permian-Triassic and Triassic age. From these deposits in the territory of the district the maximum oil inflows were received. 15 promising zones of oil and gas accumulation in the deposits of the oil and gas bearing horizon of zone of contact were distinguished, three of which are poorly studied by drilling and one zone (Predeniseyskaya) is in the Paleozoic oil and gas complex.


2016 ◽  
pp. 18-23
Author(s):  
P. A. Podnebesnykh ◽  
V. P. Ovchinnikov

The paper reviews the new data on the secondary zeolite mineralization characteristics for the Lower Cretaceous deposits of the West Siberian plate north. The authors suggest that the zone of distribution of altered rocks is much wider and in addition covers the area of Russkoye field. A new method of accounting of the volume of minerals of the zeolite group is proposed based on using the value of the volume fraction content of zeolites, which allows for a more qualitative approach to calculation of volumes of hydrocarbons in this type of reservoirs. It is shown that in major foreign deposits, complicated by the zeolitization processes, in order to improve the performance of the bottom-hole zone it is recommended to use a solution of hydrochloric acid.


Sign in / Sign up

Export Citation Format

Share Document