scholarly journals SCAFFOLDING STRATEGIES FOR TEACHING ENGINEERING DESIGN IN A COLLABORATIVE PROJECT-BASED LEARNING ENVIRONMENT

2018 ◽  
Author(s):  
Mohamed Galaleldin ◽  
Hanan Anis ◽  
Patrick Dumond ◽  
David Knox
Keyword(s):  
Engineering Design ◽  
Student Performance ◽  
Engineering Students ◽  
Positive Impact ◽  
Project Based Learning ◽  
Lessons Learned ◽  
Team Work ◽  
Skill Assessment ◽  
Collaborative Project ◽  
The Impact

 Abstract –Collaborative Project Based Learning (CPBL) is known for enhancing deep learning, professional skills development, student engagement and motivation, cultivating interdependence in learning, thinking, problem solving, and creating interest and excitement in learning. This article describes the impact of an engineering design course on first-year engineering students. Student performance was evaluated before and after taking the course using a pre-and-post design skill assessment test, peer feedback evaluations, and thematic analysis of each student’s self-reflection of lessons learned. Initial analysis of the data indicates that a CPBL environment has a significantly positive impact on the development of engineering students’ ability to describe the engineering design process and relate it directly to real-world problems. Students also realized the importance of communication, team work, investigation and project management skills.

scholarly journals TEAM FORMATION IN ENGINEERING DESIGN COURSES

2019 ◽  
Author(s):  
Mohamed Galaleldin ◽  
Justine Boudreau ◽  
Hanan Anis
Keyword(s):  
Student Satisfaction ◽  
Engineering Design ◽  
Engineering Students ◽  
Project Based Learning ◽  
Team Composition ◽  
Structured Interviews ◽  
Great Opportunity ◽  
Project Outcome ◽  
The Right ◽  
The Impact

Engineering design courses often include a team-based project. Project-based learning offers a great opportunity for engineering students to learn about teamwork and collaboration. It also gives students a chance to learn about themselves and improve their conflict management skills. Choosing the right team members for a specific project is not trivial, as the choice of the team often affects the project outcome and the students’ experience in the course. Moreover, there is a debate among engineering educators as to whether it is better to force team composition or not. In this paper, we investigate the impact of team composition and formation on project outcomes and student satisfaction in a second-year engineering design course at the University of Ottawa. The course is open to all engineering students and has an accessibility theme. Students work in teams with a client that has a specific accessibility need. Students meet the client three times during the semester and deliver a physical prototype by the end of the semester. For this study, students in the design course were divided into two groups. Students in the first group were allowed to pick their teams, while the instructor created the teams in the second group based on multidisciplinary composition and year of study. Both groups had the same instructor and the same course material, labs, project choices, etc. Semi-structured interviews were conducted with a few teams in each group.

scholarly journals The Impact of Social Media & Messaging Application Utilization to the Learning Effectiveness (Higher Education Learning Effectiveness Through Social Media & Messaging Application)

2019 ◽  
Vol 9 (2) ◽  
pp. 2112-2116
Keyword(s):  
Social Media ◽  
Student Performance ◽  
Learning Process ◽  
Positive Impact ◽  
Research Result ◽  
Research Unit ◽  
Learning Effectiveness ◽  
Improve Student Performance ◽  
Media Messaging ◽  
The Impact

Indonesian internet users reached 143,26 Million in 2017, most of them used internet for accessing messaging and social media application. We argue that usage of messaging and social media can give positive impact to the learning process. Our research method using questionnaire to collect data, research conduct in Private University in Jakarta, and student as our research unit analysis. The second year’s research shows that optimization of social media application and messenger services to improve student performance can be done by knowing the most common social media application and messenger services that used by student, socialize the process to increase number of participation, utilization of features of the application, continuous improvement, and communication about method’s success story that can attracts lecturer and students to apply and keep improve the more effective method and learning process. This research result can be use by the lecturer or educator to improve education through social media application and messenger.

scholarly journals Project-based STEM-courses for engineering students

2020 ◽  
Vol 8 (2) ◽  
pp. 53-68
Author(s):  
Galyna Vasylivna Lutsenko ◽  
◽  
Oksana Mykolaivna Podolian ◽  
Lyudmyla Mikhailivna Ozhyndovych ◽  
◽  
...  
Keyword(s):  
Engineering Students ◽  
Optimal Strategies ◽  
Active Role ◽  
Project Based Learning ◽  
Educational Process ◽  
Project Work ◽  
Approaches To Teaching ◽  
Stem Disciplines ◽  
National University ◽  
The Impact

One of the world-recognized practices of modern higher education is the application of problem-based and project-based approaches to teaching STEM-disciplines. In case of integration of problem-based and project-based learning, the educational process is organized around the problem to be solved by students and stimulates them to find optimal strategies for solving, and project activities are chosen as a way of organizing work. The article describes the ongoing experience of implementation of project-based STEM-courses "Hydro- and Gas Dynamics" and "Applied Mechanics and Fundamentals of Design", which is part of training of engineering students of 151 Automation and Computer-integrated technologies speciality at the Bohdan Khmelnytskyy National University of Cherkasy during 2017-2019 academic years. The impact of problem-based and project-based approaches to teaching STEM-disciplines on the formation of professional and general competencies of future engineers had been analyzed. The dynamics of changes of personal and interpersonal skills of junior students during the teamwork on mono- and multidisciplinary projects had been studied. The case study method was chosen as the general research method, which corresponds to the number of research participants and the active role of researchers in the educational process. The results of surveys developed using the 5-point Likert scale, demonstrates that students mostly positively evaluate the projects and teamwork. The possibility of self-grouping, which made possible to form teams based on common interests and promote freer and more natural communication within the team, was the important factor of positive perception of project work. The disadvantages of the implemented approaches include the difficulties that manifested itself at the stage of students' planning of the project process. One of the reasons for this is the lack of previous experience in the realization of students' team projects. The introduction of multidisciplinary projects made it possible to optimize the workload of students working simultaneously on a project in two disciplines and increase the motivation to study the disciplines of the STEM cycle.

scholarly journals Entrepreneurial intention of engineering students: the role of motivations and barriers

2021 ◽  
Vol 5 (2) ◽  
pp. first
Author(s):  
Bich Huy Hai Bui ◽  
Minh Tien Pham
Keyword(s):  
Engineering Students ◽  
Positive Impact ◽  
Entrepreneurial Intention ◽  
Statistical Regression ◽  
Internal Factors ◽  
University Of Technology ◽  
Entrepreneurial Motivations ◽  
Using Data ◽  
The Impact

The purpose of this study is to explore perceptions of entrepreneurial motivations and barriers and to assess their influence on the entrepreneurial intention of engineering students. Using data of 350 respondents who are students at HCMC University of Technology, VNU-HCM, the study identifies the key motives and barriers towards entrepreneurship. The data are then subjected to statistical regression in order to identify causal relationships between the motivations, barriers, and entrepreneurial intention. The results indicate that creativity, independence, and economic motivation have a positive impact on entrepreneurial intention and that the most important motivator for the entrepreneurial intention of engineering students is creativity. On the contrary, lack of knowledge is the only barrier (an internal barrier) that impedes the students' intention of entrepreneurship. These results imply that the students' entrepreneurial intention is more affected by internal factors (for both motivations and barriers) than external factors. In terms of the relative power of the effects of motives and barriers on students' entrepreneurial intention, the results suggest that the impact of motivations is generally more powerful than that of barriers. The findings have important implications for educators and policymakers.

scholarly journals An examination of the factors affecting the performance of Management Accounting students at the Durban University of Technology

2020 ◽  
Author(s):  
◽  
Stephanie Caroline Singh
Keyword(s):  
South Africa ◽  
Student Performance ◽  
Positive Impact ◽  
Management Accounting ◽  
Cost Accounting ◽  
Accounting Students ◽  
Factors Affecting ◽  
Five Factors ◽  
University Of Technology ◽  
The Impact

The success of a module at a university of technology is measured by student performance. At the Durban University of Technology in the Department of Management Accounting, students in their second year of study struggle with conceptualising content in Cost Accounting two which affects their performance. The purpose of this study was to identify the factors which may impact on the performance of Cost Accounting two students and to determine if these factors have a significant association with a student’s performance in Cost Accounting two. Many studies have identified various factors which may influence students’ academic performance. For the purpose of this study, five factors that may affect student performance were identified and examined. The independent variables or factors identified were attendance, age, gender, grade 12 results and language. The dependent variable for this study was performance (in Cost Accounting two). In order to measure the performance of students included in the study, the percentage achieved in Cost Accounting two for the semester was used. Although studies have been conducted on student performance at universities across South Africa and around the world, limited studies were conducted on the performance of Cost Accounting two students within South Africa. The study aimed to identify the factors that affect the performance of Cost and Management Accounting students at a university of technology and the impact of those factors on performance. The study found that only student attendance has a positive impact on student performance in Cost Accounting two. The findings of this study may be useful to the Department of Management Accounting at the DUT and other universities of technology. It is hoped that the current study will be useful to other teachers of cost and management accounting at universities on which factors influence the academic achievement of students.

scholarly journals Assessing Collaborative, Project-based Learning Models in Introductory Science Courses

2019 ◽  
Vol 19 (1) ◽  
Author(s):  
Kristin Huysken ◽  
Harold Olivey ◽  
Kevin McElmurry ◽  
Ming Gao ◽  
Peter Avis
Keyword(s):  
Student Performance ◽  
Cell Biology ◽  
Problem Based Learning ◽  
Learning Model ◽  
Project Based Learning ◽  
Learning Models ◽  
Collaborative Project ◽  
First Semester ◽  
Student Teams ◽  
Introductory Biology Course

Collaborative, project-based learning models have been shown to benefit student learning and engagement in the STEM disciplines. This case study evaluates the use of highly collaborative project- and problem-based learning models in introductory courses in the geosciences and biology. In the geosciences, we developed project-based modules with a strong local focus. Student teams worked on three project-based laboratories dealing with the local geology/geomorphology, water quality of a local stream, and local flooding issues. These replaced traditionally taught laboratories on topographic maps and rivers and streams. Student teams presented project results in lieu of taking a traditional laboratory practical. In biology, we designed a collaborative learning model that incorporated three problem-based learning modules into a first-semester introductory biology course. Students were assigned topics in evolution, cell biology and genetics to research independently during the course of the semester, with each module culminating in a brief presentation on the topic. Modules were designed to mirror concepts being covered in the lecture. Preliminary results suggest that student performance and attitudes towards course material benefitted from this learning model. The authors consider outcomes, benefits, and challenges to students and instructors.

The Assessment of Product Archaeology as a Platform for Contextualizing Engineering Design

2013 ◽  
Author(s):  
Kemper Lewis ◽  
Deborah Moore-Russo ◽  
Phil Cormier ◽  
Andrew Olewnik ◽  
Gül Kremer ◽  
...  
Keyword(s):  
Engineering Design ◽  
Engineering Students ◽  
National Network ◽  
Societal Context ◽  
Novel Approaches ◽  
Knowledge And Practice ◽  
Pedagogical Innovations ◽  
Global World ◽  
The Impact

Many engineering departments struggle to meet “the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context” (Outcome h) that is required for ABET. As a result, engineering students receive meaningful contextual experiences in piecemeal fashion and graduate with a lack of concrete competencies that bridge knowledge and practice in the global world in which they will live and work. By considering products as designed artifacts with a history rooted in their development, our product archaeology framework combines concepts from archaeology with advances in cyber-enhanced product dissection to implement pedagogical innovations that address the significant educational gap. In this paper, we focus on assessing elements of a sustainable and scalable foundation that can support novel approaches aimed at educating engineering students to understand the global, economic, environmental, and societal context and impact of engineering solutions. This foundation is being developed across a network of partner institutions. We present recent results from freshman, sophomore, and senior courses at two of the partners in the national network of institutions.

Enhancing Engineering Learning Experience at UTB by Freshmen iHOP

2015 ◽  
Author(s):  
Nazmul Islam
Keyword(s):  
Engineering Design ◽  
Real World ◽  
Engineering Students ◽  
Learning Experience ◽  
Low Cost ◽  
Project Based Learning ◽  
Senior Design ◽  
Team Selection ◽  
Hands On ◽  
Lower Division

Most of the engineering courses focus more on theory and very little on hands-on, project-based learning in the classroom. Integration of real-world engineering problems and applications in lower division engineering courses will produce engineering students, who will be technically sound and be able to execute and manage real-world projects, when they will do senior design projects in their final year of engineering study. To overcome the engineering design challenges we have developed iHOP (Ingenieŕia Hands on Project) and integrate it with our lower division engineering courses. iHOP has been developed to emphasis the design component at the University of Texas at Brownsville (UTB) Engineering Physics curriculum and the project is now an integral part of Introduction to Engineering class. The iHOP project is one that is challenging, fun, requires teamwork, associated with the engineering material being studied, low cost, and doable in a limited amount of time. The experience from iHOP project motivates our freshman students to choose a better senior design project in senior year of their college career. The objectives of the iHOP projects are — to have students develop teamwork skills, and to teach students basic engineering design concepts in a complementary format to the traditional lecture. Various techniques related to team selection, encouraging teamwork, incorporation of engineering topics, keeping costs down, project results presentations, and gathering feedback from students will also be presented in this paper. Integrating iHOP Project with Introduction to Engineering class helped us to improve our retention effort in the engineering department.

Understanding the Impact of Engineering Through Appropriate Technology Development

2016 ◽  
Author(s):  
Nickey Janse van Rensburg ◽  
Z. Simpson ◽  
N. Malan
Keyword(s):  
Engineering Students ◽  
Design Thinking ◽  
Research Collaboration ◽  
Technology Development ◽  
Pilot Project ◽  
Project Based Learning ◽  
Appropriate Technology ◽  
Open Market ◽  
Market Growth ◽  
The Impact

This research describes a pilot project which aimed to introduce CDIO-type (Conceive-Design-Implement-Operate), project-based learning through a community-based project in a third year Material Science module. The project formed part of an agriculture research initiative, and relied on interdisciplinary research collaboration between engineering, social sciences, management, entrepreneurship, and industrial arts. The initiative seeks to develop an agribusiness solution that will create an open-market, growth-oriented food economy. As part of the initiative, engineering students, participating in teams, worked alongside a community of urban farmers, most of whom are working poor, so as to develop appropriate, intermediate technology/ies that could support the farmers. This was informed by the need to have students demonstrate high level understanding of disciplinary content, but also to engage in human-centered design thinking and practice.

Sign in / Sign up

Export Citation Format

Share Document