scholarly journals TEACHING DESIGN TO FIRST-YEAR CHEMICAL ENGINEERING STUDENTS

2011 ◽  
Author(s):  
Viviane Yargeau
Keyword(s):  
Engineering Students ◽  
Chemical Engineering ◽  
First Year ◽  
Basic Sciences ◽  
First Year Students ◽  
Design Component ◽  
Teaching Design ◽  
Scientific Principles ◽  
Mcgill University ◽  
Key Features

Despite the evolution in the chemical engineering curricula, the first years of the curriculum are still primarily devoted to the basic sciences and the application of scientific principles to technological problems. The author describes how the Department of Chemical Engineering at McGill University accepted the challenge of introducing first-year students to design. An overview of the design component implemented in the Introduction to Chemical Engineering course is given. Key features include design objectives and methodology, design projects and assessment. The author identified a significant increase of students’ enthusiasm about the course due to the application of their knowledge to “real” problems.

scholarly journals What Can Students’ Bibliographies Tell Us?- Evidence Based Information Skills Teaching for Engineering Students

2006 ◽  
Vol 1 (2) ◽  
pp. 12 ◽  
Author(s):  
Fei Yu ◽  
Jan Sullivan ◽  
Leith Woodall
Keyword(s):  
Web Sites ◽  
Engineering Students ◽  
Chemical Engineering ◽  
First Year ◽  
Journal Articles ◽  
First Year Students ◽  
Internet Resources ◽  
Information Skills ◽  
Upper Level ◽  
Department Faculty

Objective - This project sought to identify students’ strengths and weaknesses in locating, retrieving, and citing information in order to deliver information skills workshops more effectively. Methods - Bibliographies submitted from first-year engineering and second- and fourth-year chemical engineering students’ project reports were analysed for the number of items cited, the variety of items cited, and the correct use of citation style. The topics of the project reports were also reviewed to see the relationships between the topics and the items cited. Results - The results show that upper level students cited more items in total than did lower level students in their bibliographies. Second- and fourth-year engineering students cited more books and journal articles than first-year students cited. Web sites were used extensively by all three groups of students, and for some first-year students these were the most frequently used sources. Students from all three groups had difficulties with citation style. Conclusion - There was a clear difference in citation frequency between upper and lower level engineering students. Different strategies of information skills instruction are needed for different levels of students. Librarians and department faculty members need to include good quality Internet resources in their teaching and to change the emphasis from finding information to finding, interpreting, and citing accurately.

scholarly journals Gender differences in chemical engineering students identified in understanding of rolling motion

2020 ◽  
Keyword(s):  
Gender Differences ◽  
Conceptual Understanding ◽  
Engineering Students ◽  
Chemical Engineering ◽  
Male Students ◽  
First Year ◽  
Rolling Motion ◽  
Energy Principle ◽  
First Year Students ◽  
Engineering And Technology

In this research papaer we presented the results of exploration of gender differences in conceptual understanding of rolling motion (velocities and work-energy principle). For this purpose, we have selected nine conceptual items and conducted experiment with 184 first year students at the Faculty of Chemical Engineering and Technology, University of Zagreb. Results show that male students significantly outperformed female students. We detected particularly large differences on items that tests knowledge of the rolling phenomena. Results of our research can help teachers to create lessons that are adapted to general student population.

Assessing Engineering Design: A Comparison of the Effect of Exams and Design Practica on First-Year Students’ Design Self-Efficacy

2020 ◽  
Vol 143 (5) ◽  
Author(s):  
Hannah Nolte ◽  
Catherine Berdanier ◽  
Jessica Menold ◽  
Christopher McComb
Keyword(s):  
Self Efficacy ◽  
Engineering Students ◽  
Underrepresented Students ◽  
First Year ◽  
First Year Students ◽  
Engineering Programs ◽  
Efficacy Analysis ◽  
Design Component ◽  
Assessment Survey ◽  
Team Design

Abstract In response to calls for engineering programs to better prepare students for future careers, many institutions offer courses with a design component to first-year engineering students. This work proposes that traditional exam-based assessments of design concepts are inadequate, and alternative forms of assessment are needed to assess student learning in design courses. This paper investigates the self-efficacy differences between a traditional exam and a two-part practicum as a mid-semester assessment for introductory engineering students enrolled in a first-year design course. Increased self-efficacy has been linked to various positive student outcomes and increased retention of underrepresented students. The practicum consisted of an in-class team design task and an out-of-class individual reflection, while the exam was a traditional, individual written exam. All students completed a pre-assessment survey and a post-assessment survey, both of which included measures of design self-efficacy. Analysis showed that the practicum increased the design self-efficacy of students more effectively than the exam. Students who identified as women had greater gains in design self-efficacy during the practicum as compared with men. Identifying as a minority subgroup student was also trending toward being a significant predictor of change in design self-efficacy for the practicum. Findings suggest that a mid-semester practicum is a successful assessment of design competencies that contributes to increased first-year engineering student self-efficacy.

REVERSE ENGINEERING: TENSION RATCHET DISSECTION PROJECT

2011 ◽  
Author(s):  
Jeremiah Vanderlaan ◽  
Josh Richert ◽  
James Morrison ◽  
Thomas Doyle
Keyword(s):  
Reverse Engineering ◽  
Engineering Students ◽  
Measurement Techniques ◽  
First Year ◽  
Stepping Stones ◽  
First Year Students ◽  
Final Project ◽  
Undergraduate Study ◽  
Solid Edge ◽  
Part Modeling

We are a group of engineering students, in our first year of undergraduate study. We have been selected from one thousand first year students and have competed and won the PACE competition. All engineers share a common general first year, but we have been accepted into Civil and Mechanical engineering. This project was assigned as the final project in the Design and Graphics course. The project we are tasked with, called the Cornerstone Design Project, is to first dissect a product, discover how it works, dimension each part and create a fully assembled model using CAD software (Solid Edge V20 in our case). As part of discovering how it works we must benchmark it so the device can be compared with competing products. The goal of the project is to develop a full understanding of part modeling and assembly in Solid Edge, learn proper measurement techniques, and learn the process of reverse engineering and product dissection. All of these tasks were stepping stones to help us fully understand how the device, and all its components, work.

Education for sustainable development in Spanish higher education: an assessment of sustainability competencies in engineering and education degrees

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fermín Sánchez-Carracedo ◽  
Daniel Romero-Portillo ◽  
Bàrbara Sureda Carbonell ◽  
Francisco Manuel Moreno-Pino
Keyword(s):  
Sustainable Development ◽  
Engineering Students ◽  
Education For Sustainable Development ◽  
First Year ◽  
Education Students ◽  
First Year Students ◽  
Content Type ◽  
Spanish Higher Education ◽  
Percentage Measure ◽  
University Degree

Purpose This paper aims to present a methodology for analysing the extent to which students of a university degree perceive that they have received a good education for sustainable development (ESD). The methodology enables us to quantify this perception, which, in turn, allows us to determine: to what extent the objectives related to ESD are achieved in the degree, and to compare the learning in ESD perceived by students of different degrees. The methodology is applied to nine engineering degrees and nine education degrees in the Spanish university system. Design/methodology/approach ESD is analysed from the students’ learning perception. This perception is measured by comparing the responses of first- and fourth-year students to a questionnaire about their sustainability competencies. Two indicators have been designed to analyse the results. The first indicator, learning increase, measures the declared learning difference between fourth- and first-year students. The second indicator, learning percentage, measure the amount of learning as reported by fourth-year students compared to how much they could have learned. Findings The results show that the average learning percentage perceived by students is higher in engineering degrees (33%) than in education degrees (27%), despite the fact that the average learning increase declared by students at the end of their studies in both areas of knowledge is similar (66%). Engineering students report having achieved higher learning than education students in all sustainability competencies, with the exception of ethics. Originality/value This paper analyses ESD from the student’s perspective. Furthermore, to the knowledge of the authors, this is the first study that compares the perception of ESD between engineering and education students. This comparison allows us to determine the different approaches that university Professors take to ESD according to the discipline they teach.

CAD Platform Independent Software for Automatic Grading of Technical Drawings

2017 ◽  
Author(s):  
Sanchit Ingale ◽  
Anirudh Srinivasan ◽  
Diana Bairaktarova
Keyword(s):  
Engineering Students ◽  
Spatial Reasoning ◽  
Learning Experience ◽  
Spatial Visualization ◽  
First Year ◽  
Spatial Skills ◽  
First Year Students ◽  
Pedagogical Tool ◽  
Students Success ◽  
Mechanical Objects

Spatial visualization is the ability of an individual to imagine an object mentally and understand its spatial orientation. There have been multiple works proving that spatial visualization skills can be improved with an appropriate training. Such training warrant a critical place in the undergraduate engineering curricula in many engineering schools as spatial skills are considered vital for students’ success in the technical and design fields [1–4]. Enhanced spatial skills help not only professionals in the engineering field but also everyone in the 21st century environment. Drawing sectional views requires mental manipulation and visual thinking. To enhance students spatial reasoning, one of the authors of this study, conducted a class in spatial visualization. The course-learning goal aimed at improving first-year engineering students’ spatial reasoning through instruction on freehand drawings of sectional view. During the semester, two teaching assistants had to grade more than 500 assignments that consisted of sectional views of mechanical objects. This was a tedious and a time consuming task. Motivated by this experience, this paper proposes a software aiming at automating grading of students’ sectional view drawings. The proposed software will also give live feedback to students while they are working on the drawings. This interactive tool aims to 1) improve the learning experience of first year students, with limited CAD knowledge, and 2) introduce a pedagogical tool that can enhance spatial visualization training.

scholarly journals "REAL" ENGINEERING FOR A MULTI-DISCIPLINARY 1ST YEAR PROJECT/DESIGN COURSE APSC100

2011 ◽  
Author(s):  
Barrie Jackson
Keyword(s):  
Broad Spectrum ◽  
Chemical Processes ◽  
Modern World ◽  
First Year ◽  
Project Design ◽  
Basic Sciences ◽  
First Year Students ◽  
Career Experience ◽  
The Subject ◽  
Engineering Career

Queen’s University has a common first year for engineering. A few years ago a project/design course was introduced, APSC100, which has been quite successful. It was predicated on the fact that students who are attracted to engineering are really excited about the possibility of “doing engineering” early in their student experience. The design of Chemical processes is something that few if any first year students have any appreciation of. We are in the process of developing a project for APSC100 which will introduce the subject as well as have the students work with a commercial FlowSheet simulator. We believe that simulators “warts and all (1)” can be an excellent learning tool, and exposure to these programs is essential as they have become so much a part of today’s engineering career experience. Commercial Flowsheet simulators continue to be a challenge for people with many years familiarity with these systems. There is however a potential for a great deal of learning about the “design process” by the use of these tools, provided these tools are presented in such a way as to be challenging but not intimidating. The paper will describe the approach to developing the APSC100 module, the challenges faced and the anticipated solutions. One particular problem will be developing something that will interest a broad spectrum of students. It has been noted that “Chemistry” often seems to be a subject that is avoided by many. This module will hopefully demonstrate the fact that “Chemistry” is one of the basic sciences and how it is the basis for much of the product of the modern world. Since this is a “work-in-progress” we anticipate and welcome suggestions as to how to present a successful module to our students.

Role of Emotional Intelligence in Academic Achievement

2014 ◽  
pp. 255-263 ◽  
Author(s):  
Tripti Singh ◽  
Manish Kumar Verma ◽  
Rupali Singh
Keyword(s):  
Academic Achievement ◽  
Emotional Intelligence ◽  
Social Intelligence ◽  
Engineering Students ◽  
School Level ◽  
First Year ◽  
First Year Students ◽  
Academic Achievements ◽  
Emotional Intelligence Inventory

The purpose of this study is to see whether there is a relationship between emotional intelligence and academic achievement. The study respondents were B.Tech first year students from the Agra region. Sampling is stratified, making sure that gender, race, socioeconomic status, and abilities are appropriately represented. The respondents are given Emotional Intelligence Inventory (EII–MM), developed by S. K. Mangal and Shubhra Mangal. It consists of 100 items under four scales .The analysis suggests that there is a significant relationship between Emotional Intelligence and Academic Achievement. IQ alone is no more the measure for success; emotional intelligence, social intelligence, and luck also play a big role in a person's success. This study contributes in acknowledging the fact that even engineering students’ academic achievements are attached with Emotional intelligence. Thus, teaching emotional and social skills only at the school level is not sufficient; this can be taught in engineering studies, as well for accomplishing high academic achievements.

A Reflection on Teaching Design Thinking to First-Year Engineering Students

2019 ◽  
Author(s):  
Kuntinee Maneeratana ◽  
Ratchatin Chancharoen ◽  
Peerapat Thongnuek ◽  
Potcharawan Sukmuen ◽  
Chamaiporn Inkaew ◽  
...  
Keyword(s):  
Engineering Students ◽  
Design Thinking ◽  
First Year ◽  
Teaching Design

scholarly journals Teaching Design to First-Year Engineering Students

2015 ◽  
Author(s):  
Michael McGuire ◽  
Kin Fun Li ◽  
Fayez Gebali
Keyword(s):  
Engineering Design ◽  
Engineering Students ◽  
First Year ◽  
Considerable Effort ◽  
Student Teams ◽  
Product Engineering ◽  
Teaching Design ◽  
Integrated Communication ◽  
The University

Design is associated with the invention,planning and building a product. Engineering design, inparticular, takes considerable effort, skills, andintegration of knowledge; hence, it is difficult to teachfreshmen this subject since they have not possessed ordeveloped the proper skill set yet. The Faculty ofEngineering at the University of Victoria has beenteaching engineering design (in two successive courses)to all first-year engineering students. In addition toattending plenary lectures, student teams are working oncompetitive projects in the laboratory, while participatingin highly integrated communication modules. In thiswork, we discuss the curricula of these design courses,model of delivery and share our experience for the pastthree years.

Sign in / Sign up

Export Citation Format

Share Document