scholarly journals Formulation and Evaluation of Gliclazide Solid Dispersions Incorporated Tablets for Controlled Drug Release

2020 ◽  
pp. 621-629
Author(s):  
Ramisetty Sunitha ◽  
Kothakota Venugopal ◽  
Suggala Venkata Satyanarayana
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Solid Dispersion ◽  
Release Kinetics ◽  
Maximum Yield ◽  
Amorphous State ◽  
Tablet Formulation ◽  
Drug Dissolution ◽  
Fickian Diffusion ◽  
Drug Content

The current study deals with formulation and evaluation of gliclazide solid dispersion with HP β Cyclodextrin to enhance solubility and incorporate into tablet formulation for controlled release of gliclazide. Gliclazide solid dispersion (SD) prepared using varying ratios of HP β Cyclodextrin and evaluated. The optimized SD formulation incorporated into tablet by using hydroxypropyl cellulose, HPMC K 100M. The drug dissolution from tablet formulation analyzed and characterize. The formulation SD3 comprising of drug and polymer in 1:3 ratio displayed 43-fold increase in solubility when compared to pure drug. The formulation SD13 displayed maximum yield of 98.96% and maximum drug content of 99% chosen optimal for tablet formulation. FTIR studies revealed that there is no incompatibility between drug and polymers found. XRD studies revealed that the optimized solid dispersion formulation was found to be in amorphous state. Around 15 formulations of controlled release tablet blends evaluated for micrometric properties show that all the formulations posses’ good flow properties. Formulation F15 with maximum drug content of 99.99% and drug release of 99.96 % over 16h was chosen optimal and characterized. The release kinetics suggest that drug release followed zero order and release from tablets was anomalous non- fickian diffusion super case II transport. The results show that combination of solid dispersion and application of hydrophilic and hydrophobic polymers in matrix formation can facilitate better dissolution and absorption profile with greater patient compliance.

scholarly journals APPLICATION OF NOVEL NATURAL POLYMER FOR CONTROLLING THE RELEASE OF FENOVERINE FROM CONTROLLED RELEASE MATRIX TABLETS

2017 ◽  
Vol 9 (2) ◽  
pp. 1 ◽  
Author(s):  
Ajit Kulkarni ◽  
Trushali Mandhare ◽  
Nagesh Aloorkar
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Kinetics ◽  
Methyl Cellulose ◽  
Matrix Tablets ◽  
Natural Polymer ◽  
In Vitro Drug Release ◽  
Dissolution Studies ◽  
Drug Content

Objective: To explore a novel natural polymer, pullulan for controlling the release of fenoverine from matrix tablets and to elucidate the release kinetics of fenoverine from pullulan and HPMC matrices.Methods: In this study we formulated monolithic matrix tablets containing of fenoverine as controlled-release tablets by direct compression using pullulan, HPMC (Hydroxypropyl methyl cellulose) K4M and HPMC K100M polymers and evaluated for hardness, thickness, friability, weight variation drug content, in vitro drug release characteristics and FTIR (Fourier transform infrared spectroscopy) and DSC (Differential scanning calorimetry) study.Results: All the formulations showed compliance with pharmacopoeial standards. FTIR and DSC study indicated the absence of interaction between fenoverine and excipients. The formulation was optimized on the basis of acceptable tablet properties and in vitro drug release. The results of dissolution studies indicated that the formulation F5 [drug to polymer 1: 0.35] exhibited highest % cumulative drug release of 96.82±0.75 % at the end of 12 h. Optimised batch F5 showed super case II transport mechanism and followed zero order release kinetics. Short-term stability studies of the optimized formulation indicated that there were no significant changes observed in hardness, drug content and in vitro dissolution studies at the end of three months period. Similarity factor f2 was found to be 89, which indicated similar dissolution profiles before and after stability study.Conclusion: Based on above results we conclude that pullulan can be used as a polymer for retarding the release of drug from matrix formulations.Keywords: Pullulan, Fenoverine, Hydroxypropyl methyl cellulose, Controlled release, In vitro

scholarly journals Fabrication of Intragastric Floating, Controlled Release 3D Printed Theophylline Tablets Using Hot-Melt Extrusion and Fused Deposition Modeling

Pharmaceutics ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 77 ◽  
Author(s):  
Bhupendra Giri ◽  
Eon Song ◽  
Jaewook Kwon ◽  
Ju-Hyun Lee ◽  
Jun-Bom Park ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Shell Thickness ◽  
Fused Deposition Modeling ◽  
Release Kinetics ◽  
Hot Melt Extrusion ◽  
Fickian Diffusion ◽  
Melt Extrusion ◽  
Fused Deposition ◽  
Hot Melt

This work presents a novel approach for producing gastro-retentive floating tablets (GRFT) by coupling hot-melt extrusion (HME) and fused deposition three-dimensional printing (3DP). Filaments containing theophylline (THEO) within a hydroxypropyl cellulose (HPC) matrix were prepared using HME. 3DP tablets with different infill percentages and shell thickness were developed and evaluated to determine their drug content, floating behavior, dissolution, and physicochemical properties. The dissolution studies revealed a relationship between the infill percentage/shell thickness and the drug release behavior of the 3DP tablets. All the developed GRFTs possessed the ability to float for 10 h and exhibited zero-order release kinetics. The drug release could be described by the Peppas–Sahlin model, as a combination of Fickian diffusion and swelling mechanism. Drug crystallinity was found unaltered throughout the process. 3DP coupled with HME, could be an effective blueprint to produce controlled-release GRFTs, providing the advantage of simplicity and versatility compared to the conventional methods.

scholarly journals Development of Nicotinic Acid Controlled Release Tablets with Natural Phenolic Anti-oxidant Polymer by Encapsulation Technique

2021 ◽  
Vol 20 (4) ◽  
pp. 204
Author(s):  
Ravi Manne ◽  
Agilandeswari Devarajan
Keyword(s):  
Drug Release ◽  
Nicotinic Acid ◽  
Encapsulation Efficiency ◽  
Release Kinetics ◽  
Diffusion Mechanism ◽  
Fickian Diffusion ◽  
Wet Granulation ◽  
Stability Studies ◽  
Cholesterol Lowering ◽  
Drug Content

Nicotinic Acid (NA) is a cholesterol lowering agent used to treat dyslipidemia. Proanthocyanidins (PC) was selected as a drug and encapsulation material in which the later has a dual property of being a polymer as well as cholesterol lowering agent. The encapsulation of NA with different concentrations of (PC) was carried out by solvent evaporation technique. The encapsulated NA was converted to granules which were then compressed into tablets by wet granulation method. It was subjected to many pre-compression parameters evaluation such as flow properties, drug content and encapsulation efficiency. The tablets were evaluated for thickness, hardness, friability, <em>in vitro</em> release studies, release kinetics and stability studies. The evaluated parameters of the formulations showed compliance with pharmacopoeial standards. The encapsulation efficiency was 99.73% and 99.52% of drug content. The FT-IR spectrum did not show interaction between drug and polymer. The drug release in pH 1.2 was lesser than in pH 6.8 buffer. The encapsulated product released drug in controlled manner in alkaline medium. The drug release was 97.1% and release was extended up to 12 hrs. The optimized batch underwent stability studies as per ICH guidelines. It can be concluded that among all the formulations the F5 can be considered as optimized formulation. The optimized formulations showed non-fickian diffusion mechanism of release.

scholarly journals Formulation and Evaluation of Eudragit Rl100 Polymeric Drug Loaded Microsponge for Ophthalmic Use

2021 ◽  
pp. 45-51
Author(s):  
Rajashri B. Ambikar ◽  
Ashok V. Bhosale
Keyword(s):  
Particle Size ◽  
Controlled Release ◽  
Drug Release ◽  
Delivery System ◽  
Diffusion Mechanism ◽  
Diclofenac Sodium ◽  
Entrapment Efficiency ◽  
Fickian Diffusion ◽  
Drug Content

Aims: The aim of this work is the formulation of Eudragit RL100 polymeric microsponges. The Microsponge Delivery System is a patented technique in which there is a polymeric system consisting of porous particles. Methodology: The ratio of Diclofenac sodium and eudragit RL100 varied from 1:1 to 13: 1 to formulate microsponge. Dichloromethane was used as internal phase and polyvinylalcohol was used as an external phase. The formed microsponges were characterized for particle size, entrapment efficiency, drug content, in vitro drug release and SEM. Results: With increase in drug: polymer ratio there is increase in production yield from 20.04% to 72.14%, and entrapment efficiency from 20.11% to 70.77%.  Drug content of formed microsponge varied between 50.18% to 91.09% whereas particle size ranged from 1.41 µm to 17.66 µm. Microsponge formulations F3, F4 and F5 showed desired particle size hence studied for further evaluation. Formulation F3, F4 and F5 showed controlled release of 89.54%, 98.5% and 98.76% respectively up to 6 hr. F3 showed more controlled release at the end of 6 hr. The drug release from microsponges was best fitted to Higuchi’s diffusion kinetics for all microsponge formulations with non-Fickian diffusion mechanism. The formed microsponge particles have spherical porous structure. Conclusion: Study showed significance of Microsponge Delivery System for ophthalmic administration.

scholarly journals Cefdinir Inclusion in Mesoporous Silica as Effective Dissolution Enhancer with Improved Physical Stability

2021 ◽  
Vol 11 ◽  
pp. 73-86
Author(s):  
Raghad Al Nuss ◽  
Hind El Zein
Keyword(s):  
Drug Release ◽  
Mesoporous Silica ◽  
Release Kinetics ◽  
Physical Stability ◽  
Amorphous State ◽  
Weibull Model ◽  
Drug Dissolution ◽  
Scanning Calorimetry ◽  
Immersion Method ◽  
Amorphous Form

Objective: The objective of this research was to enhance the physical stability and the dissolution rate of cefdinir, a BCS class IV drug, characterized by low and variable bioavailability due to both its low solubility and low permeability. Methods: Cefdinir was loaded into the mesoporous silica (SBA-15), by using the solvent immersion method starting from different organic solvents. And then formula (F3), which exhibited the highest loading percentage, was selected to study its drug release in media with different pH (1.2, 4.5, and 6.8), and has been fully characterized by using: Fourier Transform Infrared Spectroscopy (FT-IR) Spectroscopy, Differential Scanning Calorimetry, Powder X-ray Diffraction, and has been subjected to accelerated stability tests using different temperatures and relative humidity. Drug release kinetics were studied by using the following models: Probit, Gompertz, Weibull, and Logistic. Results: The results showed a remarkable dissolution improvement of cefdinir from the loaded silica in comparison to the crystalline drug at the different studied media. Drug release behaviors were well simulated by the Weibull model for F3 in all studied media and for pure Cefdinir in phosphate buffer only, and by the Gompertz function for pure Cefdinir in HCl buffer and Acetate buffer. FTIR results showed hydrogen bonds formed between the drug and silica, DSC and PXRD results revealed the transformation of cefdinir into an amorphous form upon adsorption. Stability studies under different conditions revealed the ability of mesoporous silica to maintain the amorphous state of the drug, which has been formed upon adsorption, and to prevent re-organization in the crystal nucleus of the drug molecules. Conclusion: Thus, loading cefdinir onto mesoporous silica can be used as a promising method to enhance drug dissolution, and maintain the physical stability of its amorphous form.

NANO-SIZED SOLID DISPERSION OF A POORLY WATER-SOLUBLE DRUG

2012 ◽  
pp. 31-35
Author(s):  
Truong Dinh Thao Tran ◽  
Ha Lien Phuong Tran ◽  
Nghia Khanh Tran ◽  
Van Toi Vo
Keyword(s):  
Drug Release ◽  
Droplet Size ◽  
Solid Dispersion ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Dissolution Enhancement ◽  
Particle Size Reduction ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

Purposes: Aims of this study are dissolution enhancement of a poorly water-soluble drug by nano-sized solid dispersion and investigation of machenism of drug release from the solid dispersion. A drug for osteoporosis treatment was used as the model drug in the study. Methods: melting method was used to prepare the solid dispersion. Drug dissolution rate was investigated at pH 1.2 and pH 6.8. Drug crystallinity was studied using differential scanning calorimetric and powder X-ray diffraction. In addition, droplet size and contact angle of drug were determined to elucidate mechanism of drug release. Results: Drug dissolution from the solid dispersion was significantly increased at pH 1.2 and pH 6.8 as compared to pure drug. Drug crystallinity was changed to partially amorphous. Also dissolution enhancement of drug was due to the improved wettability. The droplet size of drug was in the scale of nano-size when solid dispersion was dispersed in dissolution media. Conclusions: nano-sized solid dispersion in this research was a successful preparation to enhance bioavailability of a poorly water-soluble drug by mechanisms of crystal changes, particle size reduction and increase of wet property.

Development and Evaluation of Controlled Release Mucoadhesive Tablets of Captopril

1970 ◽  
Vol 9 (3) ◽  
pp. 3318-3329
Author(s):  
Kranthi Kumar Kotta ◽  
L. Srinivas
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Xanthan Gum ◽  
Diffusion Mechanism ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Content Uniformity ◽  
In Vitro Drug Release ◽  
Mucoadhesive Tablets

The present investigation focuses on the development of mucoadhesive tablets of captopril which are designed to prolong the gastric residence time after oral administration. Matrix tablets of captopril were formulated using four mucoadhesive polymers namely guar gum, xanthan gum, HPMC K4M and HPMC K15M and studied for parameters such as weight variation, thickness, hardness, content uniformity, swelling index, mucoadhesive force and in vitro drug release. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M provide slow release of captopril over period of 12 hr and were found suitable for maintenance portion of oral controlled release tablets. The cumulative % of drug release of formulation F9 and F10 were 90 and 92, respectively. In vitro release from these tablets was diffusion controlled and followed zero order kinetics. The ‘n’ values obtained from the pappas-karsemeyer equation suggested that all the formulation showed drug release by non-fickian diffusion mechanism. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M (1:1) were established to be the optimum formulation with optimum bioadhesive force, swelling index & desired invitro drug release. This product was further subjected to stability study, the results of which indicated no significant change with respect to Adhesive strength and in vitro drug release study.

Formulation and Evaluation of Nelfinavir Extended Release Trilayer Matrix Tablets by Design of Experiment

2018 ◽  
Vol 11 (5) ◽  
pp. 4259-4268
Author(s):  
Nirmala Rangu ◽  
Gande Suresh
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Magnesium Stearate ◽  
Zero Order ◽  
Matrix Tablets ◽  
Drug Dissolution ◽  
Crystalline Cellulose ◽  
Dissolution Profile ◽  
Release Formulation

The present study was aimed to develop once-daily controlled release trilayer matrix tablets of nelfinavir to achieve zero-order drug release for sustained plasma concentration. Nelfinavir trilayer matrix tablets were prepared by direct compression method and consisted of middle active layer with different grades of hydroxypropyl methylcellulose (HPMC), PVP (Polyvinyl Pyrrolidine) K-30 and MCC (Micro Crystalline Cellulose). Barrier layers were prepared with Polyox WSR-303, Xanthan gum, microcrystalline cellulose and magnesium stearate. Based on the evaluation parameters, drug dissolution profile and release drug kinetics DF8 were found to be optimized formulation. The developed drug delivery system provided prolonged drug release rates over a period of 24 h. The release profile of the optimized formulation (DF8) was described by the zero-order and best fitted to Higuchi model. FT-IR studies confirmed that there were no chemical interactions between drug and excipients used in the formulation. These results indicate that the approach used could lead to a successful development of a controlled release formulation of nelfinavir in the management of AIDS.

Optimization Study to Develop Once-a-day Controlled Release Formulation of Metoclopramide with Predictable Design Space

1970 ◽  
Vol 1 (1) ◽  
pp. 71-76
Author(s):  
Rajesh Dubey ◽  
Udaya K. Chowdary ◽  
Venkateswarlu V.
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Design Space ◽  
Release Kinetics ◽  
Release Profile ◽  
Release Formulation ◽  
Linear Effect ◽  
Controlled Release Formulation ◽  
The Difference ◽  
Face Centered

A controlled release formulation of metoclopramide was developed using a combination of hypromellose (HPMC) and hydrogenated castor oil (HCO). Developed formulations released the drug over 20 hr with release kinetics following Higuchi model. Compared to HCO, HPMC showed significantly higher influence in controlling the drug release at initial as well as later phase. The difference in the influence can be explained by the different swelling and erosion behaviour of the polymers. Effect of the polymers on release was optimized using a face-centered central composite design to generate a predictable design space. Statistical analysis of the drug release at various levels indicated a linear effect of the polymers’ levels on the drug release. The release profile of formulations containing the polymer levels at extremes of their ranges in design space was found to be similar to the predicted release profile

Mesoporous Silica Molecular Sieve based Nanocarriers: Transpiring Drug Dissolution Research

2017 ◽  
Vol 23 (3) ◽  
pp. 467-480 ◽  
Author(s):  
Satyanarayan Pattnaik ◽  
Kamla Pathak
Keyword(s):  
Drug Release ◽  
Mesoporous Silica ◽  
Molecular Sieves ◽  
Release Kinetics ◽  
Drug Loading ◽  
Scale Up ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Water Soluble Drugs ◽  
Loading Methods

Background: Improvement of oral bioavailability through enhancement of dissolution for poorly soluble drugs has been a very promising approach. Recently, mesoporous silica based molecular sieves have demonstrated excellent properties to enhance the dissolution velocity of poorly water-soluble drugs. Description: Current research in this area is focused on investigating the factors influencing the drug release from these carriers, the kinetics of drug release and manufacturing approaches to scale-up production for commercial manufacture. Conclusion: This comprehensive review provides an overview of different methods adopted for synthesis of mesoporous materials, influence of processing factors on properties of these materials and drug loading methods. The drug release kinetics from mesoporous silica systems, the manufacturability and stability of these formulations are reviewed. Finally, the safety and biocompatibility issues related to these silica based materials are discussed.

Sign in / Sign up

Export Citation Format

Share Document