scholarly journals Step-Based CAD/CAPP Integration for Finish Machining Operations

2010 ◽  
Author(s):  
A. Arivazhagan ◽  
N. K. Mehta ◽  
P. K. Jain
Keyword(s):  
Finish Machining ◽  
Machining Operations

253. Characterization of Beryllium Aerosols Associated with Machining Operations

1999 ◽  
Author(s):  
J.W. Martyny ◽  
M. Hoover ◽  
K. Ellis ◽  
M. Mroz ◽  
L. Newman ◽  
...  
Keyword(s):  
Machining Operations

ANACONDA ALLOY 360

Alloy Digest ◽  
1982 ◽  
Vol 31 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
High Speed ◽  
Heat Treating ◽  
High Speed Machining ◽  
Copper Base ◽  
Screw Machine ◽  
Medium Strength ◽  
Machining Operations ◽  
Strength And Ductility

Abstract ANACONDA Alloy 360 is a leaded brass and is the alloy most often used for high-speed machining operations; it fills most of the needs for such purposes. Alloy 360 is the standard free-cutting brass and its machinability has become the standard by which all other copper-base alloys are rated. It has medium strength and ductility. Alloy 360 is used for hardware such as gears and pinions where excellent machinability is of prime importance and for all types of automatic high-speed screw-machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-447. Producer or source: Anaconda American Brass Company.

AL TECH 203EZ and 303EZ

Alloy Digest ◽  
1978 ◽  
Vol 27 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Stainless Steels ◽  
High Speed ◽  
Heat Treating ◽  
Temperature Performance ◽  
Final Design ◽  
Mechanical Properties And Corrosion ◽  
Specialty Steel ◽  
Machining Operations ◽  
Machining Characteristics

Abstract AL Tech 203EZ and 303EZ are non-magnetic, austenitic, free-machining stainless steels specifically designed for use in high-speed, automatic machining operations. These modifications retain, in so far as possible, the good mechanical properties and corrosion resistance of the basic compositions which they represent. Sulfur or selenium is added to produce the free-machining characteristics. Data are typical; do not use for specification or final design. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-358. Producer or source: AL Tech Specialty Steel Corporation.

CARPENTER STAINLESS TYPE 405

Alloy Digest ◽  
1981 ◽  
Vol 30 (11) ◽  
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Annealed Condition ◽  
Finish Machining ◽  
Chromium Stainless Steel

Abstract CARPENTER STAINLESS TYPE 405 is a 12% chromium stainless steel that does not harden appreciably. It was designed to allow its use in the as-welded condition. It is particularly desirable for welded applications which require finish machining. It has moderate tensile strength (70,000 psi) in the fully annealed condition and resists corrosion in mild environments. It is used for parts and structures that cannot be annealed after welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-395. Producer or source: Carpenter.

CPM REX 25

Alloy Digest ◽  
1980 ◽  
Vol 29 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
High Hardness ◽  
Heat Treating ◽  
High Speeds ◽  
Aisi Type ◽  
Tool Performance ◽  
End Mills ◽  
Machining Operations

Abstract CPM REX 25 is a super high-speed steel made without cobalt. It is comparable to AISI Type T15 cobalt-containing high-speed steel in response to heat treatment, properties, and tool performance. CPM REX 25 is recommended for machining operations requiring heavy cuts, high speeds and feeds, and difficult-to-machine materials of high hardness and abrasion resistance. Typical applications are boring tools, drills, gear cutters, punches, form tools, end mills and broaches. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-365. Producer or source: Crucible Materials Corporation.

scholarly journals Bibliometric Analysis of Specific Energy Consumption (SEC) in Machining Operations: A Sustainable Response

2021 ◽  
Vol 13 (10) ◽  
pp. 5617
Author(s):  
Raman Kumar ◽  
Sehijpal Singh ◽  
Ardamanbir Singh Sidhu ◽  
Catalin I. Pruncu
Keyword(s):  
Energy Consumption ◽  
Bibliometric Analysis ◽  
Specific Energy ◽  
Specific Energy Consumption ◽  
Primary Data ◽  
Data Content ◽  
Author Keywords ◽  
Link Strength ◽  
Inclusive Analysis ◽  
Machining Operations

This paper’s persistence is to make an inclusive analysis of 268 documents about specific energy consumption (SEC) in machining operations from 2001 to 2020 in the Scopus database. A systematic approach collects information on SEC documents’ primary data; their types, publications, citations, and predictions are presented. The VOSviewer 1.1.16 and Biblioshiny 2.0 software are used for visualization analysis to show the progress standing of SEC publications. The selection criteria of documents are set for citation analysis. The ranks are assigned to the most prolific and dominant authors, sources, articles, countries, and organizations based on the total citations, number of documents, average total citation, and total link strength. The author-keywords, index-keywords, and text data content analysis has been conducted to find the hotspots and progress trend in SEC in machining operations. The most prolific and dominant article, source, author, organization, and country are Anderson et al. “Laser-assisted machining of Inconel 718 with an economic analysis”, the Int J Mach Tools Manuf, Shin Y.C., form Purdue University Singapore, and United States, respectively, based on total citations as per defined criteria. The author keywords “specific cutting energy” and “surface roughness” dominate the machining operations SEC. SEC’s implication in machining operations review and bibliometric analysis is to deliver an inclusive perception for the scholars working in this field. It is the primary paper that utilizes bibliometric research to analyze the SEC in machining operations publications expansively. It is valuable for scholars to grasp the hotspots in this field in time and help the researchers in the SEC exploration arena rapidly comprehend the expansion status and trend.

scholarly journals Development of thin-film based sensors for temperature and tool wear monitoring during machining

2020 ◽  
Vol 87 (12) ◽  
pp. 768-776
Author(s):  
Marcel Plogmeyer ◽  
Germán González ◽  
Volker Schulze ◽  
Günter Bräuer
Keyword(s):  
Thin Film ◽  
Physical Vapor Deposition ◽  
Control Mechanisms ◽  
Insulation Layer ◽  
Sensor Layer ◽  
Thin Film Sensors ◽  
Wear Protection ◽  
Cutting Inserts ◽  
Wear Monitoring ◽  
Machining Operations

AbstractThe development of thin-film sensors for temperature and wear measurement in machining operations is presented in this work. A functional thin-film system, consisting of an Al2O3 insulation layer, a chromium sensor layer structured by photolithography and an Al2O3 wear-protection and insulation layer, is deposited by physical vapor deposition (PVD) processes onto the surface of cemented carbide cutting inserts. First specimen of the sensors are successfully fabricated and tested in laboratory experiments as well as in machining operations to demonstrate their functionality. These tool-integrated sensors can be used as an in-process monitoring device to determine the temperatures on the rake face at or close to the tool-chip contact area and to measure the progress of the flank-wear land width. The knowledge of these important process parameters opens up the possibility to develop new in-process control mechanisms in order to modify and improve the surface integrity of manufactured components. Thereby, their performance and lifetime can be enhanced.

scholarly journals Experimental tests of PVD AlCrN-coated planer knives on planing Scots pine (Pinus sylvestris L.) under industrial conditions

2021 ◽  
Author(s):  
Krzysztof Nadolny ◽  
Wojciech Kapłonek ◽  
Marzena Sutowska ◽  
Paweł Sutowski ◽  
Piotr Myśliński ◽  
...  
Keyword(s):  
Research Work ◽  
Experimental Tests ◽  
Technical Condition ◽  
Cutting Edge ◽  
Raw Material ◽  
Edge Condition ◽  
Wear Area ◽  
Pine Wood ◽  
Wood Processing ◽  
Machining Operations

AbstractRaw pine wood processing and especially its mechanical processing constitute a significant share among technological operations leading to obtaining a finished product. Stable implementation of machining operations, ensuring long-term repeatable processing results depends on many factors, such as quality and invariability of raw material, technical condition of technological equipment, adopted parameters of work, qualifications and experience of operators, as well as preparation and properties of the machining tools used. It seems that the greatest potential in the search for opportunities to increase the efficiency of machining operations has the modification of machining tools used in it. This paper presents the results of research work aimed at determining how the life of cutting tools used in planing operations of wet pine wood is affected by the application of chromium aluminum nitride (AlCrN) coating to planar industrial planing knives in the process of physical vapour deposition. For this purpose operational tests were carried out under production conditions in a medium-sized wood processing company. The study compares the effective working time, rounding radius, the profile along the knife (size of worn edge displacement, wear area of the cutting edge), selected texture parameters of the planar industrial planing knife rake face and visual analyses of cutting edge condition of AlCrN-coated planar knives and unmodified ones. The obtained experimental results showed the possibility of increasing the life of AlCrN-coated knives up to 154% compared to the results obtained with uncoated ones. The proposed modification of the operational features of the knives does not involve any changes in the technological process of planing, does not require any interference with the machining station nor its parameters, therefore enabling rapid and easy implementation into industrial practice.

Sign in / Sign up

Export Citation Format

Share Document