scholarly journals Fracture resistance of endodontically treated teeth restored with resin post reinforced with glass fiber

2021 ◽  
Vol 14 (1) ◽  
pp. 81-85
Author(s):  
Mihaela Chirila ◽  
◽  
◽  
◽  
◽  
...  
Keyword(s):  
Glass Fiber ◽  
Fracture Resistance ◽  
Surface Friction ◽  
Axial Direction ◽  
Resin Cement ◽  
Resistance Testing ◽  
Endodontically Treated Teeth ◽  
Adhesive Resin ◽  
Gutta Percha ◽  
Root Dentin

This study aims to determine whether the design of resin posts reinforced with glass fiber (FRC) and Reporfost (Angelus, Londrina, PR, Brazil) significantly improves the fracture resistance of endodontically treated teeth restored through this method.A batch of 30 maxillary monoradicular teeth (15 central incisors, 15 canines) were treated endodontically by step-back technique (apical enlargement 40-K file) sealed with Sealapex (Kerr Corporation, Orange, US) and gutta-percha by lateral condensation, cold. They were divided into two equal groups, prepared for cementing the FRC posts. The Exacto posts (Angelus, Londrina, PR, Brazil) in group 1 and the Reforpost posts (Angelus; Londrina; PR, Brazil) were cemented with dual cure resin cement Breeze Self-Adhesive Resin Cement (Pentron Clinical, Orange, US). Fracture resistance testing was performed on the crown-apical axial direction, using the Hounsfield / Tinius Olsen H1-KS, PA, USA mechanical testing apparatus. The behavior of each tooth-post assembly was recorded as a graph. The statistical analysis was done using one way ANOVA (α=0.05). The differences between the Exacto post group and the Reforpost post group are not statistically significant (p = 0.466). The maximum force recorded was 970 N and the minimum 186N. The mean force at which the fracture occurred was approximately 500N for both groups. The strain test showed that modifying the Reforpost post design did not improve the fracture resistance parameters of the tooth-post assembly through increasing the surface friction or maintaining adhesion to the walls of the root dentin.

scholarly journals Efficacy of Fiber Post Bonding To Root Dentin after Different Obturation Techniques and Cementation Timings: In Vitro Study

2018 ◽  
Vol 6 (9) ◽  
pp. 1707-1711
Author(s):  
Rami M. Atia ◽  
Nada Omar ◽  
Haidy Nabil ◽  
Yousra Aly
Keyword(s):  
Bond Strength ◽  
Statistical Significance ◽  
Testing Machine ◽  
In Vitro Study ◽  
Resin Cement ◽  
Vitro Study ◽  
Endodontically Treated Teeth ◽  
Root Dentin ◽  
Push Out

OBJECTIVE: The aim of this in vitro study was to assess the effect of obturation technique and cementation timings on the bonding of fibre-reinforced posts to the root canal walls. METHODS: Twenty extracted teeth were randomly allocated to two groups according to the obturation technique and cementation timing. Central incisors with single canals were used after being decoronated. Every extracted tooth of the {vertical compaction group} (VC) group (n = 10) had been obturated using the {E & Q plus obturation system} with posts cemented in the same day; The other (CO) conventional group (n = 10) teeth were obturated using the conventional lateral compaction technique and posts cemented after one week. “SF“ Fiber posts were used after bonding and cementation using Rely X ARC resin cement with all the endodontically treated teeth. The push-out test was performed in a universal testing machine. Data were analysed by 2 way analysis of variance with Statistical significance was set to 0.05. RESULTS: Heat softened gutta percha group showed more push out the bond strength of the bonded posts than the conventional obturation group (p < 0.05). In the middle region, there was no statistical significance between the two groups while there was significance in the coronal and apical thirds. CONCLUSION: The vertical compaction technique and early cementation improved the bond strength of the resin posts in comparison to the conventional obturation technique with late cementation.

scholarly journals Effect of post type and restorative techniques on the strain and fracture resistance of flared incisor roots

2011 ◽  
Vol 22 (3) ◽  
pp. 230-237 ◽  
Author(s):  
Gisele Rodrigues da Silva ◽  
Paulo César de Freitas Santos-Filho ◽  
Paulo Cézar Simamoto-Júnior ◽  
Luis Roberto Marcondes Martins ◽  
Adérito Soares da Mota ◽  
...  
Keyword(s):  
Glass Fiber ◽  
Fracture Resistance ◽  
Composite Resin ◽  
Endodontically Treated Teeth ◽  
Biomechanical Behavior ◽  
Fiber Posts ◽  
Strain Fracture ◽  
Significant Difference ◽  
Catastrophic Failures ◽  
Glass Fiber Posts

Restoring flared endodontically treated teeth continues to be a challenge for clinicians. This study evaluated the effect of post types and restorative techniques on the strain, fracture resistance, and fracture mode of incisors with weakened roots. One hundred five endodontically treated bovine incisors roots (15 mm) were divided into 7 groups (n=15). The two control groups were (C) intact roots restored with Cpc (cast posts and core) or Gfp (glass fiber posts). The five experimental groups were (F) flared roots restored with GfpAp (Gfp associated with accessory glass fiber posts), GfpRc (anatomic Gfp, relined with composite resin), and GfpRcAp (anatomized Gfp with resin and accessory glass fiber posts). All teeth were restored with metal crowns. Mechanical fatigue was performed with 3x10(5)/50 N. Specimens were loaded at 45º, and the strain values (μS) were obtained on root buccal and proximal surfaces. Following that, the fracture resistance (N) was measured. One-way ANOVA and Tukey's HSD tests (α=0.05) were applied, and failure mode was checked. No significant difference in strain values among the groups was found. Cpc presented lower fracture resistance and more catastrophic failures in flared roots. Gfp associated with composite resin or accessory glass fiber posts seems to be an effective method to improve the biomechanical behavior of flared roots.

scholarly journals Fracture Resistance and Microleakage of Endocrowns Utilizing Three CAD-CAM Blocks

2015 ◽  
Vol 40 (2) ◽  
pp. 201-210 ◽  
Author(s):  
HM El-Damanhoury ◽  
RN Haj-Ali ◽  
JA Platt
Keyword(s):  
Fracture Mode ◽  
Computer Aided Design ◽  
Fracture Resistance ◽  
Testing Machine ◽  
Resin Cement ◽  
Blue Dye ◽  
Endodontically Treated Teeth ◽  
Modes Of Failure ◽  
Computer Aided ◽  
Cad Cam

SUMMARY This study assessed marginal leakage and fracture resistance of computer-aided design/computer-aided manufacturing (CAD/CAM) fabricated ceramic crowns with intracoronal extensions into the pulp chambers of endodontically treated teeth (endocrowns) using either feldspathic porcelain (CEREC Blocks [CB], Sirona Dental Systems GmbH, Bensheim, Germany), lithium disilicate (e.max [EX], Ivoclar Vivadent, Schaan, Liechtenstein), or resin nanoceramic (Lava Ultimate [LU], 3M ESPE, St Paul, MN, USA).). Thirty extracted human permanent maxillary molars were endodontically treated. Standardized preparations were done with 2-mm intracoronal extensions of the endocrowns into the pulp chamber. Teeth were divided into three groups (n=10); each group was restored with standardized CAD/CAM fabricated endocrowns using one of the three tested materials. After cementation with resin cement, specimens were stored in distilled water at 37°C for one week, subjected to thermocycling, and immersed in a 5% methylene-blue dye solution for 24 hours. A compressive load was applied at 35 degrees to long axis of the teeth using a universal testing machine until failure. Failure load was recorded, and specimens were examined under a stereomicroscope for modes of failure and microleakage. Results were analyzed using one-way analysis of variance and Bonferroni post hoc multiple comparison tests (α=0.05). LU showed significantly (p&lt;0.05) higher fracture resistance and more favorable fracture mode (ie, fracture of the endocrown without fracture of tooth) as well as higher dye penetration than CB and EX. In conclusion, although using resin nanoceramic blocks for fabrication of endocrowns may result in better fracture resistance and a more favorable fracture mode than other investigated ceramic blocks, more microleakage may be expected with this material.

scholarly journals Influence of ferrule preparation with or without glass fiber post on fracture resistance of endodontically treated teeth

2010 ◽  
Vol 18 (4) ◽  
pp. 360-363 ◽  
Author(s):  
Alexandra Furtado de Lima ◽  
Aloísio Oro Spazzin ◽  
Daniel Galafassi ◽  
Lourenço Correr-Sobrinho ◽  
Bruno Carlini-Júnior
Keyword(s):  
Glass Fiber ◽  
Fracture Resistance ◽  
Fiber Post ◽  
Endodontically Treated Teeth ◽  
Glass Fiber Post

scholarly journals Effect of a sonic device on bonding of fiberglass posts to root canals

2018 ◽  
Vol 17 ◽  
pp. e18924
Author(s):  
Marina de Almeida Salim ◽  
Thais Mageste Duque ◽  
Heloisa Carla Dell Santo Gusman ◽  
Carolina Oliveira de Lima ◽  
Brenda Paula Figueiredo de Almeida Gomes ◽  
...  
Keyword(s):  
Root Canal ◽  
Adhesive System ◽  
Resin Cement ◽  
Root Canal Filling ◽  
Root Canals ◽  
Gutta Percha ◽  
Ah Plus ◽  
Root Dentin ◽  
Post Hoc ◽  
Adhesive Cement

Aim: This study evaluated the effect of a sonic device on the bonding of fiberglass posts cemented with a self-etching adhesive combined with conventional cement or a self-adhesive cement to root dentin. Methods: Forty single-rooted bovine incisors were endodontically prepared using a step-back technique. Gutta-percha and AH Plus sealer were used for root canal filling, combined with a thermoplasticization technique. After 1 week, the post space was prepared and the roots were divided into four groups according to the following factors: adhesive system/resin cement (Ambar/ AllCem Core [FGM] and RelyX U200 [3M]) and application mode (manual or sonic). The posts were cemented and the roots were cut into discs and submitted to push-out bond strength (POBS) test. The failure mode was evaluated using a stereoscope at 25x magnification. The data were analyzed statistically using ANOVA and Tukey’s post-hoc test (α = 0.05). Results: The sonically activated RelyX U200 group was superior to the other groups. RelyX U200 manually applicated showed similar results to those of sonically activated Âmbar/AllCem. These three groups outperformed the Âmbar/AllCem manually applicated group. Adhesive failure between dentin and resin cement was the most predominant pattern. Conclusion: Sonic application of self-etching adhesive and self-adhesive cement improved the POBS of fiber posts to the root canal.

scholarly journals Effect of Surface Treatment of Fiberglass Posts on Bond Strength to Root Dentin

2014 ◽  
Vol 25 (4) ◽  
pp. 314-320 ◽  
Author(s):  
Andréa Dolores Correia Miranda Valdivia ◽  
Veridiana Resende Novais ◽  
Murilo de Sousa Menezes ◽  
Marina Guimarães Roscoe ◽  
Carlos Estrela ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Bond Strength ◽  
Surface Treatment ◽  
Repeated Measures ◽  
Resin Cement ◽  
Adhesive Resin ◽  
Relyx Unicem ◽  
Treatment Type ◽  
Root Dentin ◽  
Push Out

This study evaluated the influence of the surface treatments of fiberglass posts on bond strength to root dentin using push-out test. Forty bovine incisor roots were endodontically treated. The surface of the fiberglass posts (Exacto #2, Angelus) were treated using 4 different protocols (n=10): Control - 70% ethanol for 1 min; 37% phosphoric acid for 1 min; 10% hydrofluoric acid for 1 min; and 24% hydrogen peroxide for 1 min. After a silane coupling agent was applied for 1 min and all posts were cemented using self-adhesive resin cement (RelyX Unicem, 3M-ESPE). The roots were sectioned and two 1-mm-thick slices were obtained from each third: cervical, middle and apical. The specimens were subjected to the push-out test with a crosshead speed of 0.5 mm/min. Data were analyzed by repeated measures ANOVA followed by Tukey's HSD tests (=0.05). The surface treatment (p<0.001) and root third region (p=0.007) factors were significant. The retention to root canal was affected by surface treatment type. The post surface treatment with 24% hydrogen peroxide for 1 min yielded significantly higher bond strength when the fiberglass posts were cemented with RelyX Unicem.

Self-Adhesive Resin Cement for Luting Glass Fiber Posts

2014 ◽  
Vol 26 (6) ◽  
pp. 417-421 ◽  
Author(s):  
Noéli Boscato ◽  
Tatiana Pereira-Cenci ◽  
Rafael R. Moraes
Keyword(s):  
Glass Fiber ◽  
Resin Cement ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement

Fracture Resistance of Endodontically-treated Teeth Restored Using Three Root-reinforcement Methods

2008 ◽  
Vol 9 (1) ◽  
pp. 30-37 ◽  
Author(s):  
Soodabeh Kimyai ◽  
Horieh Moosavi ◽  
Fathemeh Maleknejad
Keyword(s):  
Fracture Resistance ◽  
Resin Composite ◽  
Testing Machine ◽  
Acrylic Resin ◽  
Mean Value ◽  
Resin Cement ◽  
Endodontically Treated Teeth ◽  
Root Reinforcement ◽  
Anterior Teeth

Abstract Aim The aim of this in vitro study was to compare the fracture resistance of endodontically-treated anterior teeth with their roots reinforced using three different restorative methods. Methods and Materials Forty sound maxillary human central incisors were randomly assigned to four groups (n=10). The crowns of the teeth were removed at a level 2 mm incisal to the cementoenamel junction (CEJ). After root canal therapy, flared canals were simulated in three groups. In the first, second, and third groups the flared canals were reinforced with resin composite (RCO) (Clearfil DC Core Automix), two Reforpins (REF), and a resin cement (RCE) (Panavia F 2.0), respectively. In the fourth (DEN) group flared canals were not created. The same size fiber reinforced composite (FRC) posts were cemented with resin cement (Panavia F 2.0) in all groups. After post cementation and restoration of the teeth crown with a core build-up composite (Clearfil Photo Core), the roots of the teeth were embedded in acrylic resin blocks up to 1 mm below the CEJ. The samples were loaded in an Instron testing machine with a crosshead speed of 0.5 mm/min at a 45° angle to the long axis of the tooth on the palatal surfaces until failure occurred. Data were analyzed using the Kruskal-Wallis, Mann-Whitney, and Chi-square tests (p=0.05). Results Significant differences were found between fracture resistance in all of the groups (P<0.05) with the exception being among the RCO and REF groups. The least mean value 230 (130) N and the highest mean value 830 (220) N were shown in the fracture resistance of the RCE and DEN groups, respectively. Conclusion Reforpin can be used as an alternative to resin composite for internal reinforcement of weakened roots according to the results of this study. For reinforcement of flared canals, fiber posts along with Reforpin or resin composite proved to have higher fracture resistance than resin cement. Non flared canals had the highest fracture resistance. Citation Moosavi H, Maleknejad F, Kimyai S. Fracture Resistance of Endodontically-treated Teeth Restored Using Three Root-reinforcement Methods. J Contemp Dent Pract 2008 January; (9)1:030-037.

scholarly journals The Effect of Intraradicular Multiple Fiber and Cast Posts on the Fracture Resistance of Endodontically Treated Teeth with Wide Root Canals

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Satheesh B. Haralur ◽  
Maram Awdah Al Ahmari ◽  
Safeyah Abdurrahman AlQarni ◽  
Mashael Khaled Althobati
Keyword(s):  
Fracture Resistance ◽  
Pairwise Comparison ◽  
Fracture Load ◽  
Resin Cement ◽  
Endodontically Treated Teeth ◽  
Cast Metal ◽  
Root Canals ◽  
Group 4 ◽  
Group 3 ◽  
Group 2

Introduction. The endodontically treated teeth (ETT) with thin remaining radicular dentin thickness are predisposed to fracture; hence it requires the diligent selection and the execution of endodontic post treatment. The objective of the study was to evaluate the reinforcing effect of both multiple fiber reinforced composite (FRC) and Ni-Cr cast metal posts at anterior and posterior regions. Material and Methods. Forty recently extracted root canal treated canine and single rooted premolar teeth were used for the study. They were randomly divided into four groups (n=10) as: Group 1, single FRC post; Group 2, multiple FRC posts; Group 3, single Ni-Cr metal post, Group 4, multiple Ni-Cr posts. The posts were cemented with self-adhesive resin cement and subsequently restored with full veneer metal crown. The compressive static load at 1300 for canine and 450 for premolar was applied with the cross-head speed of 0.5mm/minute until the fracture. The obtained data was analyzed using the Kruskal–Wallis and Pairwise comparison tests with SPSS. Results. The results indicate that multiple FRC post restored canine had the maximum fracture load (1843.80±7.13 N), followed by cast multiple posts (1648.99±26.84 N), single fiber post (1623±40.31 N), and cast metal single post (1493±27.33 N). A similar trend was observed in premolar with higher max fracture load with multiple FRC posts at 1920.86±20.61 N and multiple cast metal posts at 1735.43±6.05 N. Conclusion. The restoration of ETT with larger canals by multiple FRC and metal posts provides substantially higher fracture resistance in comparison to wider single post.

Bond strength of self-adhesive resin cement to root dentin. Comparison of photon-initiated photoacoustic streaming technique with needle and ultrasonic irrigation

2015 ◽  
Vol 73 (5) ◽  
pp. 348-352 ◽  
Author(s):  
Hakan Arslan ◽  
Merve Akcay ◽  
Gokhan Saygili ◽  
Ahmet Keskı ◽  
İbrahim Talha MeŞe ◽  
...  
Keyword(s):  
Bond Strength ◽  
Resin Cement ◽  
Adhesive Resin ◽  
Ultrasonic Irrigation ◽  
Root Dentin ◽  
Adhesive Resin Cement
Sign in / Sign up

Export Citation Format

Share Document