scholarly journals OPTIMISASI PRODUKSI ENZIM LAKASE PADA FERMENTASI KULTUR PADAT MENGGUNAKAN JAMUR PELAPUK PUTIH Marasmius sp. : PENGARUH UKURAN PARTIKEL, KELEMBAPAN, DAN KONSENTRASI Cu

2016 ◽  
Vol 3 (02) ◽  
Author(s):  
Cornelius Damar Hanung ◽  
Ronald Osmond ◽  
Hendro Risdianto ◽  
Sri Harjati Suhardi ◽  
Tjandra Setiadi
Keyword(s):  
Particle Size ◽  
Solid State ◽  
Moisture Content ◽  
Rice Straw ◽  
Solid State Fermentation ◽  
Carbon Sources ◽  
White Rot Fungi ◽  
Batch Process ◽  
Solid Substrate ◽  
White Rot

White rot fungi of Marasmius sp. is a fungus which produce laccase in high activity. Laccase is one of the ligninolityc enzymes that capable to degrade lignin. This ability can be used for the pretreatment of lignocellulosic materials in the bioethanol production. Laccase was produced in flask by batch process using Solid State Fermentation (SSF). The optimisation was conducted by statistically of full factorial design. The particle size, moisture content, and Cu concentration were investigated in this study. Rice straw was used as solid substrate and the glycerol was used as the carbon sources in modified Kirk medium. The results showed that particle size of rice straw did not affect significantly to the enzyme activity. The highest laccase activity of 4.45 IU/g dry weight was obtained at the moisture content of 61% and Cu concentration of 0.1 mM.Keywords: laccase, Marasmius sp., optimisation, rice straw, solid state fermentation ABSTRAKJamur pelapuk putih, Marasmius sp. merupakan jamur yang menghasilkan enzim lakase dengan aktivitas tinggi. Lakase merupakan enzim ligninolitik yang dapat mendegradasi lignin. Kemampuan ini dapat digunakan untuk proses pengolahan awal bahan lignoselulosa pada pembuatan bioetanol. Produksi lakase dilakukan dalam labu dengan modus batch menggunakan fermentasi kultur padat. Optimisasi produksi enzim lakase dengan metode fermentasi padat dilakukan dengan  rancangan percobaan faktorial penuh. Pengaruh ukuran partikel, kelembapan, dan konsentrasi Cu diuji dengan medium penyangga jerami dengan menambahkan gliserol dalam medium Kirk termodifikasi sebagai sumber karbon. Penelitian ini menunjukkan bahwa ukuran jerami tidak berpengaruh signifikan terhadap aktivitas enzim. Aktivitas enzim lakase maksimum terjadi pada saat kelembapan 61% dan konsentrasi Cu 0,1 mM dengan aktivitas enzim lakase/berat kering tertinggi mencapai 4,45 IU/g.Kata kunci: lakase, Marasmius sp., optimisasi, jerami, fermentasi kultur padat

scholarly journals Isolation, screening of Aspergillus flavus and its production parameters for á- amylase under solid state fermentation

2011 ◽  
Vol 3 (2) ◽  
pp. 268-273
Author(s):  
K. N. Geetha ◽  
K. Jeyaprakash ◽  
Y. P. Nagaraja
Keyword(s):  
Solid State ◽  
Moisture Content ◽  
Solid State Fermentation ◽  
Enzyme Production ◽  
Incubation Temperature ◽  
Carbon Sources ◽  
Nitrogen Sources ◽  
Soluble Starch ◽  
Solid Substrate ◽  
Fungal Species

The amylase producing fungi were isolated from spoiled fruits, vegetables and soil, in and around Bangalore, Karnataka, India. The isolates were identified and five fungal species were screened. The best amylase producer among them, Aspergillus sp was selected for enzyme production by both sub merged fermentation using mineral salt medium (MSM) and solid state fermentations using wheat bran as a solid substrate. The various parameters influencing solid state fermentation were optimized. The most important factors are such as pH, incubation temperature, incubation period, carbon sources, nitrogen sources and moisture content. The maximum amount of enzyme production was obtained when solid state fermentation was carried out with soluble starch as carbon source and beef extract (1% each) as nitrogen source, optimum conditions of pH 7.0, an incubation temperature of 25 (±2) °C, incubation time 96 h and 62% moisture content.

scholarly journals Lovastatin Production byAspergillus terreusUsing Agro-Biomass as Substrate in Solid State Fermentation

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
Mohammad Faseleh Jahromi ◽  
Juan Boo Liang ◽  
Yin Wan Ho ◽  
Rosfarizan Mohamad ◽  
Yong Meng Goh ◽  
...  
Keyword(s):  
Particle Size ◽  
Solid State ◽  
Moisture Content ◽  
Nitrogen Source ◽  
Solid State Fermentation ◽  
Incubation Temperature ◽  
Initial Moisture Content ◽  
Fermentation Time ◽  
Maximum Production ◽  
Additional Nitrogen

Ability of two strains ofAspergillus terreus(ATCC 74135 and ATCC 20542) for production of lovastatin in solid state fermentation (SSF) using rice straw (RS) and oil palm frond (OPF) was investigated. Results showed that RS is a better substrate for production of lovastatin in SSF. Maximum production of lovastatin has been obtained usingA. terreusATCC 74135 and RS as substrate without additional nitrogen source (157.07 mg/kg dry matter (DM)). Although additional nitrogen source has no benefit effect on enhancing the lovastatin production using RS substrate, it improved the lovastatin production using OPF with maximum production of 70.17 and 63.76 mg/kg DM forA. terreusATCC 20542 andA. terreusATCC 74135, respectively (soybean meal as nitrogen source). Incubation temperature, moisture content, and particle size had shown significant effect on lovastatin production (P<0.01) and inoculums size and pH had no significant effect on lovastatin production (P>0.05). Results also have shown that pH 6, 25°C incubation temperature, 1.4 to 2 mm particle size, 50% initial moisture content, and 8 days fermentation time are the best conditions for lovastatin production in SSF. Maximum production of lovastatin using optimized condition was 175.85 and 260.85 mg/kg DM forA. terreusATCC 20542 and ATCC 74135, respectively, using RS as substrate.

scholarly journals White rot fungi pretreatment to advance volatile fatty acid production from solid-state fermentation of solid digestate: Efficiency and mechanisms

Energy ◽  
2018 ◽  
Vol 162 ◽  
pp. 534-541 ◽  
Author(s):  
Wei Fang ◽  
Panyue Zhang ◽  
Xuedong Zhang ◽  
Xuefeng Zhu ◽  
Jules B. van Lier ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Solid State ◽  
Solid State Fermentation ◽  
Acid Production ◽  
Volatile Fatty Acid ◽  
White Rot Fungi ◽  
White Rot ◽  
Fatty Acid Production

Lignocellulolytic activity of Pleurotus ostreatus under solid state fermentation using silage, stover, and cobs of maize

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3797-3807
Author(s):  
Magdah Ganash ◽  
Tarek M. Abdel Ghany ◽  
Mohamed A. Al Abboud ◽  
Mohamed M. Alawlaqi ◽  
Husam Qanash ◽  
...  
Keyword(s):  
Solid State ◽  
Incubation Period ◽  
Solid State Fermentation ◽  
Pleurotus Ostreatus ◽  
White Rot Fungi ◽  
Value Added ◽  
Extracellular Protein ◽  
White Rot ◽  
White Rot Fungus ◽  
Lignocellulosic Substrate

Lignocellulolytic white-rot fungi allow the bioconversion of agricultural wastes into value-added products that are used in a myriad of applications. The aim of this work was to use corn residues (Zea mays L.) to produce valuable products under solid-state fermentation (SSF) with Pleurotus ostreatus. White-rot fungus P. ostreatus was isolated from maize silage (MS) and thereafter it was inoculated on MS as substrate and compared with maize stover (MSt) and maize cobs (MC) to determine the best lignocellulosic substrate for the production of lignocellulolytic enzymes and extracellular protein. The MS gave the highest productivity of CMCase (368.2 U/mL), FPase (170.5 U/mL), laccase (11.4 U/mL), and MnPase (6.6 U/mL). This is compared to productivity on MSt of 222 U/mL, 50.2 U/mL, 4.55 U/mL, and 2.57 U/mL, respectively; and productivity on MC at the same incubation period as 150.5 U/mL, 48.2 U/mL, 3.58 U/mL, and 2.5 U/mL, respectively. The levels of enzyme production declined with increasing incubation period after 15 and 20 days using MS and MC, respectively, as substrates. Maximum liberated extracellular protein content (754 to 878 µg/mL) was recorded using MS, while a low amount (343 to 408 µg/mL) was liberated with using MSt and MC.

Sign in / Sign up

Export Citation Format

Share Document