scholarly journals PENDUGAAN FLUKS PANAS DAN EVAPOTRANSPIRASI DENGAN JARINGAN SYARAF TIRUANHEAT FLUX AND EVAPOTRANSPIRATION ESTIMATION USING ARTIFICIAL NEURAL NETWORK

Agromet ◽  
2011 ◽  
Vol 25 (1) ◽  
pp. 24
Author(s):  
Satyanto Krido Saptomo
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Latent Heat ◽  
Measurement Data ◽  
Heat Fluxes ◽  
Similar Process ◽  
Observation Data ◽  
Data Set ◽  
Dissipation Process ◽  
Artificial Neural

<em>Artificial neural network (ANN) approach was used to model energy dissipation process into sensible heat and latent heat (evapotranspiration) fluxes. The ANN model has 5 inputs which are leaf temperature T<sub>l</sub>, air temperature T<sub>a</sub>, net radiation R<sub>n</sub>, wind speed u<sub>c</sub> and actual vapor pressure e<sub>a</sub>. Adjustment of ANN was conducted using back propagation technique, employing measurement data of input and output parameters of the ANN. The estimation results using the adjusted ANN shows its capability in resembling the heat dissipation process by giving outputs of sensible and latent heat fluxes closed to its respective measurement values as the measured input values are given.  The ANN structure presented in this paper suits for modeling similar process over vegetated surfaces, but the adjusted parameters are unique. Therefore observation data set for each different vegetation and adjustment of ANN are required.</em>

Random Forest (RF) and Artificial Neural Network (ANN) Algorithms for LULC Mapping

2020 ◽  
Vol 38 (4A) ◽  
pp. 510-514
Author(s):  
Tay H. Shihab ◽  
Amjed N. Al-Hameedawi ◽  
Ammar M. Hamza
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Artificial Neural Network ◽  
Random Forest ◽  
Satellite Image ◽  
Landsat 8 ◽  
Optical Remote Sensing ◽  
Data Set ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this paper to make use of complementary potential in the mapping of LULC spatial data is acquired from LandSat 8 OLI sensor images are taken in 2019.  They have been rectified, enhanced and then classified according to Random forest (RF) and artificial neural network (ANN) methods. Optical remote sensing images have been used to get information on the status of LULC classification, and extraction details. The classification of both satellite image types is used to extract features and to analyse LULC of the study area. The results of the classification showed that the artificial neural network method outperforms the random forest method. The required image processing has been made for Optical Remote Sensing Data to be used in LULC mapping, include the geometric correction, Image Enhancements, The overall accuracy when using the ANN methods 0.91 and the kappa accuracy was found 0.89 for the training data set. While the overall accuracy and the kappa accuracy of the test dataset were found 0.89 and 0.87 respectively.

Watermelon Sorting Process by Frequency Identification and Artificial Neural Network

2021 ◽  
Author(s):  
Komsan Wongkalasin ◽  
Teerapon Upachaban ◽  
Wacharawish Daosawang ◽  
Nattadon Pannucharoenwong ◽  
Phadungsak Ratanadecho
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Selection Process ◽  
Network Processor ◽  
Data Set ◽  
The Neural Network ◽  
Frequency Identification ◽  
Sorting Process ◽  
Artificial Neural ◽  
Reasonable Prediction

This research aims to enhance the watermelon’s quality selection process, which was traditionally conducted by knocking the watermelon fruit and sort out by the sound’s character. The proposed method in this research is generating the sound spectrum through the watermelon and then analyzes the response signal’s frequency and the amplitude by Fast Fourier Transform (FFT). Then the obtained data were used to train and verify the neural network processor. The result shows that, the frequencies of 129 and 172 Hz were suit to be used in the comparison. Thirty watermelons, which were randomly selected from the orchard, were used to create a data set, and then were cut to manually check and match to the fruits’ quality. The 129 Hz frequency gave the response ranging from 13.57 and above in 3 groups of watermelons quality, including, not fully ripened, fully ripened, and close to rotten watermelons. When the 172 Hz gave the response between 11.11–12.72 in not fully ripened watermelons and those of 13.00 or more in the group of close to rotten and hollow watermelons. The response was then used as a training condition for the artificial neural network processor of the sorting machine prototype. The verification results provided a reasonable prediction of the ripeness level of watermelon and can be used as a pilot prototype to improve the efficiency of the tools to obtain a modern-watermelon quality selection tool, which could enhance the competitiveness of the local farmers on the product quality control.

A Model on the Correlation between Composition and Mechanical Properties of Mg-Al-Zn Alloys by Using Artificial Neural Network

2005 ◽  
Vol 488-489 ◽  
pp. 793-796 ◽  
Author(s):  
Hai Ding Liu ◽  
Ai Tao Tang ◽  
Fu Sheng Pan ◽  
Ru Lin Zuo ◽  
Ling Yun Wang
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Magnesium Alloys ◽  
Tensile Yield Strength ◽  
Data Set ◽  
The Neural Network ◽  
Artificial Neural ◽  
Prediction Of Mechanical Properties ◽  
Artificial Neural Network Ann

A model was developed for the analysis and prediction of correlation between composition and mechanical properties of Mg-Al-Zn (AZ) magnesium alloys by applying artificial neural network (ANN). The input parameters of the neural network (NN) are alloy composition. The outputs of the NN model are important mechanical properties, including ultimate tensile strength, tensile yield strength and elongation. The model is based on multilayer feedforward neural network. The NN was trained with comprehensive data set collected from domestic and foreign literature. A very good performance of the neural network was achieved. The model can be used for the simulation and prediction of mechanical properties of AZ system magnesium alloys as functions of composition.

scholarly journals Adaptation of the Diagnostic Artificial Neural Network Structure When New Training Examples Appear

2020 ◽  
Vol 6 (4) ◽  
pp. 120-126
Author(s):  
A. Malikov
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Information Security ◽  
Classification Problem ◽  
Data Set ◽  
Neural Network Structure ◽  
Artificial Neural ◽  
Training Examples ◽  
Information Image

In this paper we can see that identified computer incidents are subject for diagnostics, during which the characteristics of information security violations are clarified (purpose, causes, consequences, etc.). To diagnose computer incidents, we can use methods of automation while collection and processing the events that occur as a result of the implementation of scenarios for information security violations. Artificial neural networks can be used to solve the classification problem of assigning diagnostic data set (information image of a computer incident) to one of the possible values of the violation characteristic. The purpose of this work is to adapt the structure of an artificial neural network that allows the accuracy diagnostics of computer incidents when new training examples appear.

scholarly journals Application of Wavelet Neural Network in Building Settlement Prediction

2020 ◽  
Vol 198 ◽  
pp. 03014
Author(s):  
Ruijie Zhang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Prediction Accuracy ◽  
Building Design ◽  
Wavelet Neural Network ◽  
Deformation Monitoring ◽  
Polynomial Method ◽  
Observation Data ◽  
Bp Artificial Neural Network ◽  
Artificial Neural

Deformation monitoring, as a key link of information construction, runs through the entire process of the building design period, construction period and operation period[1]. At present, more mature static prediction methods include hyperbolic method, power polynomial method and Asaoka method. But these methods have many problems and shortcomings. In this paper, based on the characteristics of building foundation settlement and the methods widely discussed in this field, a wavelet neural network model with self-learning, self-organization and good nonlinear approximation ability is applied to the prediction problem of building settlement[2]. Using comparative analysis and induction method. The 20-phase monitoring data representing the deformation monitoring points of different settlement states of the line tunnel, using the observation data sequence of the first 15 phases respectively to take the cumulative settlement and interval settlement as training samples, through the BP artificial neural network and the improved wavelet neural network, for the last five periods Predict the observed settlement.Through the comparison, it is found that whether the interval settlement or the cumulative settlement is used, the prediction results of the wavelet neural network are basically better than the prediction results of the BP artificial neural network, and the number of trainings is greatly reduced. The adaptive prediction of the wavelet neural network. The ability is particularly obvious, and the prediction accuracy is significantly improved. Therefore, it can be shown that the wavelet neural network is indeed used in the settlement monitoring and forecast of buildings, which can obtain higher prediction accuracy and better prediction effect, and is a prediction method with great development potential.

scholarly journals Artificial Neural Network Modelling of Photodegradation in Suspension of Manganese Doped Zinc Oxide Nanoparticles under Visible-Light Irradiation

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Yadollah Abdollahi ◽  
Azmi Zakaria ◽  
Nor Asrina Sairi ◽  
Khamirul Amin Matori ◽  
Hamid Reza Fard Masoumi ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Back Propagation ◽  
Light Irradiation ◽  
Maximum Efficiency ◽  
Data Set ◽  
Artificial Neural

The artificial neural network (ANN) modeling ofm-cresol photodegradation was carried out for determination of the optimum and importance values of the effective variables to achieve the maximum efficiency. The photodegradation was carried out in the suspension of synthesized manganese doped ZnO nanoparticles under visible-light irradiation. The input considered effective variables of the photodegradation were irradiation time, pH, photocatalyst amount, and concentration ofm-cresol while the efficiency was the only response as output. The performed experiments were designed into three data sets such as training, testing, and validation that were randomly splitted by the software’s option. To obtain the optimum topologies, ANN was trained by quick propagation (QP), Incremental Back Propagation (IBP), Batch Back Propagation (BBP), and Levenberg-Marquardt (LM) algorithms for testing data set. The topologies were determined by the indicator of minimized root mean squared error (RMSE) for each algorithm. According to the indicator, the QP-4-8-1, IBP-4-15-1, BBP-4-6-1, and LM-4-10-1 were selected as the optimized topologies. Among the topologies, QP-4-8-1 has presented the minimum RMSE and absolute average deviation as well as maximum R-squared. Therefore, QP-4-8-1 was selected as final model for validation test and navigation of the process. The model was used for determination of the optimum values of the effective variables by a few three-dimensional plots. The optimum points of the variables were confirmed by further validated experiments. Moreover, the model predicted the relative importance of the variables which showed none of them was neglectable in this work.

scholarly journals Modeling of daily runoff from a small agricultural watershed using artificial neural network with resampling techniques

2014 ◽  
Vol 17 (1) ◽  
pp. 56-74 ◽  
Author(s):  
Gurjeet Singh ◽  
Rabindra K. Panda ◽  
Marc Lamers
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Agricultural Watershed ◽  
Training Data ◽  
Optimum Number ◽  
Training Process ◽  
Data Set ◽  
Reported Study ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

The reported study was undertaken in a small agricultural watershed, namely, Kapgari in Eastern India having a drainage area of 973 ha. The watershed was subdivided into three sub-watersheds on the basis of drainage network and land topography. An attempt was made to relate the continuously monitored runoff data from the sub-watersheds and the whole-watershed with the rainfall and temperature data using the artificial neural network (ANN) technique. The reported study also evaluated the bias in the prediction of daily runoff with shorter length of training data set using different resampling techniques with the ANN modeling. A 10-fold cross-validation (CV) technique was used to find the optimum number of hidden neurons in the hidden layer and to avoid neural network over-fitting during the training process for shorter length of data. The results illustrated that the ANN models developed with shorter length of training data set avoid neural network over-fitting during the training process, using a 10-fold CV method. Moreover, the biasness was investigated using the bootstrap resampling technique based ANN (BANN) for short length of training data set. In comparison with the 10-fold CV technique, the BANN is more efficient in solving the problems of the over-fitting and under-fitting during training of models for shorter length of data set.

scholarly journals A New Model for Predicting Rate of Penetration Using an Artificial Neural Network

Sensors ◽  
2020 ◽  
Vol 20 (7) ◽  
pp. 2058 ◽  
Author(s):  
Salaheldin Elkatatny ◽  
Ahmed Al-AbdulJabbar ◽  
Khaled Abdelgawad
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mutual Effect ◽  
Percentage Error ◽  
Drilling Process ◽  
Ann Model ◽  
Data Set ◽  
Individual Parameter ◽  
Rate Of Penetration ◽  
Artificial Neural

The drilling rate of penetration (ROP) is defined as the speed of drilling through rock under the bit. ROP is affected by different interconnected factors, which makes it very difficult to infer the mutual effect of each individual parameter. A robust ROP is required to understand the complexity of the drilling process. Therefore, an artificial neural network (ANN) is used to predict ROP and capture the effect of the changes in the drilling parameters. Field data (4525 points) from three vertical onshore wells drilled in the same formation using the same conventional bottom hole assembly were used to train, test, and validate the ANN model. Data from Well A (1528 points) were utilized to train and test the model with a 70/30 data ratio. Data from Well B and Well C were used to test the model. An empirical equation was derived based on the weights and biases of the optimized ANN model and compared with four ROP models using the data set of Well C. The developed ANN model accurately predicted the ROP with a correlation coefficient (R) of 0.94 and an average absolute percentage error (AAPE) of 8.6%. The developed ANN model outperformed four existing models with the lowest AAPE and highest R value.

Automatic Detection of Arrow Annotation Overlays in Biomedical Images

2011 ◽  
Vol 6 (4) ◽  
pp. 23-41 ◽  
Author(s):  
Beibei Cheng ◽  
R. Joe Stanley ◽  
Soumya De ◽  
Sameer Antani ◽  
George R. Thoma
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Computational Intelligence ◽  
Medical Images ◽  
Characteristic Curve ◽  
Data Set ◽  
Negative Correlation Learning ◽  
Artificial Neural ◽  
Winner Take All ◽  
Take All

Images in biomedical articles are often referenced for clinical decision support, educational purposes, and medical research. Authors-marked annotations such as text labels and symbols overlaid on these images are used to highlight regions of interest which are then referenced in the caption text or figure citations in the articles. Detecting and recognizing such symbols is valuable for improving biomedical information retrieval. In this research, image processing and computational intelligence methods are integrated for object segmentation and discrimination and applied to the problem of detecting arrows on these images. Evolving Artificial Neural Networks (EANNs) and Evolving Artificial Neural Network Ensembles (EANNEs) computational intelligence-based algorithms are developed to recognize overlays, specifically arrows, in medical images. For these discrimination techniques, EANNs use particle swarm optimization and genetic algorithm for artificial neural network (ANN) training, and EANNEs utilize the number of ANNs generated in an ensemble and negative correlation learning for neural network training based on averaging and Linear Vector Quantization (LVQ) winner-take-all approaches. Experiments performed on medical images from the imageCLEFmed’08 data set, yielded area under the receiver operating characteristic curve and precision/recall results as high as 0.988 and 0.928/0.973, respectively, using the EANNEs method with the winner-take-all approach.

Sign in / Sign up

Export Citation Format

Share Document