scholarly journals Biocompatibility Evaluation of Electrospun Scaffolds of Poly (L-Lactide) with Pure and Grafted Hydroxyapatite

2017 ◽  
Vol 58 (4) ◽  
Author(s):  
José Manuel Cornejo-Bravo ◽  
Luis Jesús Villarreal-Gómez ◽  
Ricardo Vera-Graziano ◽  
María Raquel Vega-Ríos ◽  
José Luis Pineda-Camacho ◽  
...  

<p>The objective of this work was to evaluate the biocompatibility of scaffolds of poly(<em>L</em>-lactide) with pure and grafted hydroxyapatite, at various concentrations of reinforcement. The biocompatibility tests were carried out <em>in vivo </em>in Wistar rats by implanting the material into the subcutaneous and muscle tissues from 1 to 14 weeks and evaluating the surrounding tissue stained with hematoxylin-eosin. For <em>in vitro </em>assays, MTT and neutral red assay were used to evaluate any cytotoxicity in Mioblast Muscle C2C12 Cells (ATCC® CRL-1772™) and Bovine Coronary Artery Endothelial Cells (BCAEC); <em>Escherichia coli </em>and <em>Staphylococcus aureus </em>were used to evaluate bacterial adhesion. All variants of scaffolds provoked a mild inflammatory response, without showing necrosis. No evidence of cytotoxicity was presented in cell viability tests and good bacterial cell adhesion was visualized for all of the materials studied.</p>

2019 ◽  
Vol 20 (10) ◽  
pp. 2500 ◽  
Author(s):  
Vrathasha Vrathasha ◽  
Hilary Weidner ◽  
Anja Nohe

Background: Osteoporosis is a degenerative skeletal disease with a limited number of treatment options. CK2.3, a novel peptide, may be a potential therapeutic. It induces osteogenesis and bone formation in vitro and in vivo by acting downstream of BMPRIA through releasing CK2 from the receptor. However, the detailed signaling pathways, the time frame of signaling, and genes activated remain largely unknown. Methods: Using a newly developed fluorescent CK2.3 analog, specific inhibitors for the BMP signaling pathways, Western blot, and RT-qPCR, we determined the mechanism of CK2.3 in C2C12 cells. We then confirmed the results in primary BMSCs. Results: Using these methods, we showed that CK2.3 stimulation activated OSX, ALP, and OCN. CK2.3 stimulation induced time dependent release of CK2β from BMPRIA and concurrently CK2.3 colocalized with CK2α. Furthermore, CK2.3 induced BMP signaling depends on ERK1/2 and Smad1/5/8 signaling pathways. Conclusion: CK2.3 is a novel peptide that drives osteogenesis, and we detailed the molecular sequence of events that are triggered from the stimulation of CK2.3 until the induction of mineralization. This knowledge can be applied in the development of future therapeutics for osteoporosis.


2021 ◽  
pp. 088532822110309
Author(s):  
Jinhua Hu ◽  
Bin Ai ◽  
Shibo Zhu ◽  
Zhen Wang ◽  
Huimin Xia ◽  
...  

To investigate the biocompatibility of polylactic acid-glycolic acid copolymer (PLGA) and PLGA/gelatin scaffolds and their suitability for tubular urethral replacement in a canine model. PLGA and PLGA/gelatin scaffolds was constructed by electrospinning. Microstructural differences between the scaffolds was examined by Scanning electron microscopy (SEM) followed by mechanical properties testing. Biocompatibility of the material was evaluated using SEM 4, 8, 12 and 72 h after PLGA and PLGA/gelatin scaffolds co-culture with urothelial cells. And confocal analysis was also used to showed the cell adhesive and growth at 12 h. Approximately 2 cm of the anterior urethra of twelve dogs were removed and replaced with a scaffold. After the surgery for 1 month performed urethrography and for 3 month perform hematoxylin–eosin (H&E) and Masson. The results indicated that PLGA and PLGA/gelatin scaffolds had a void microfilament structure, similar to that of normal acellular matrix tissue. And the tensile strength was decreased whereas the tensile deformation and suture retention strength was increased in PLGA/gelatin scaffolds compared to that in PLGA scaffolds Urothelial cells grew well on both scaffolds. Postoperatively, animals recovered well and urinated spontaneously. However, urethrography showed varying degrees of urethral strictures in the reconstructed urethras. H&E and Masson showed that multilayer urothelial cells were formed in both the proximal and distal segments of the reconstructed urethras but without continuity. There was a small amount of smooth muscle and blood vessels under the epithelium, but regenerative urothelial cells at the midpoint of the reconstructed segment did not continue. Lots of lymphocyte infiltration was observed under the epithelium, some collagen tissue was deposited under the neo-urethral epithelium were observed. In conclusion, PLGA and PLGA/gelatin scaffolds are not suitable for tubularized urethral replacement in the canine model.


1998 ◽  
Vol 26 (5) ◽  
pp. 679-708 ◽  
Author(s):  
Horst Spielmann ◽  
Michael Balls ◽  
Jack Dupuis ◽  
Wolfgang J. W. Pape ◽  
Odile de Silva ◽  
...  

In 1996, the Scientific Committee on Cosmetology of DGXXIV of the European Commission asked the European Centre for the Validation of Alternative Methods to test eight UV filter chemicals from the 1995 edition of Annex VII of Directive 76/768/EEC in a blind trial in the in vitro 3T3 cell neutral red uptake phototoxicity (3T3 NRU PT) test, which had been scientifically validated between 1992 and 1996. Since all the UV filter chemicals on the positive list of EU Directive 76/768/EEC have been shown not to be phototoxic in vivo in humans under use conditions, only negative effects would be expected in the 3T3 NRU PT test. To balance the number of positive and negative chemicals, ten phototoxic and ten non-phototoxic chemicals were tested under blind conditions in four laboratories. Moreover, to assess the optimum concentration range for testing, information was provided on appropriate solvents and on the solubility of the coded chemicals. In this study, the phototoxic potential of test chemicals was evaluated in a prediction model in which either the Photoirritation Factor (PIF) or the Mean Photo Effect (MPE) were determined. The results obtained with both PIF and MPE were highly reproducible in the four laboratories, and the correlation between in vitro and in vivo data was almost perfect. All the phototoxic test chemicals provided a positive result at concentrations of 1μg/ml, while nine of the ten non-phototoxic chemicals gave clear negative results, even at the highest test concentrations. One of the UV filter chemicals gave positive results in three of the four laboratories only at concentrations greater than 100μg/ml; the other laboratory correctly identified all 20 of the test chemicals. An analysis of the impact that exposure concentrations had on the performance of the test revealed that the optimum concentration range in the 3T3 NRU PT test for determining the phototoxic potential of chemicals is between 0.1μg/ml and 10μg/ml, and that false positive results can be obtained at concentrations greater than 100μg/ml. Therefore, the positive results obtained with some of the UV filter chemicals only at concentrations greater than 100μg/ml do not indicate a phototoxic potential in vivo. When this information was taken into account during calculation of the overall predictivity of the 3T3 NRU PT test in the present study, an almost perfect correlation of in vitro versus in vivo results was obtained (between 95% and 100%), when either PIF or MPE were used to predict the phototoxic potential. The management team and participants therefore conclude that the 3T3 NRU PT test is a valid test for correctly assessing the phototoxic potential of UV filter chemicals, if the defined concentration limits are taken into account.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Erfan Dashtimoghadam ◽  
Farahnaz Fahimipour ◽  
Andrew N. Keith ◽  
Foad Vashahi ◽  
Pavel Popryadukhin ◽  
...  

AbstractCurrent materials used in biomedical devices do not match tissue’s mechanical properties and leach various chemicals into the body. These deficiencies pose significant health risks that are further exacerbated by invasive implantation procedures. Herein, we leverage the brush-like polymer architecture to design and administer minimally invasive injectable elastomers that cure in vivo into leachable-free implants with mechanical properties matching the surrounding tissue. This strategy allows tuning curing time from minutes to hours, which empowers a broad range of biomedical applications from rapid wound sealing to time-intensive reconstructive surgery. These injectable elastomers support in vitro cell proliferation, while also demonstrating in vivo implant integrity with a mild inflammatory response and minimal fibrotic encapsulation.


1992 ◽  
Vol 98 (5) ◽  
pp. 725-729 ◽  
Author(s):  
Richard M Lasarow ◽  
R Rivkah Isseroff ◽  
Edward C Gomez

2021 ◽  
Vol 42 (Supplement_1) ◽  
pp. S191-S192
Author(s):  
Angela R Jockheck-Clark ◽  
Randolph Stone ◽  
Michelle Holik ◽  
Lucy Schaffer ◽  
Shanmugasundaram Natesan ◽  
...  

Abstract Introduction Thermal burns account for 5–10% of casualties sustained in present-day conflicts and are expected to be one of the most common wounds to occur in future conflicts. In prolonged field care (PFC) situations, medical evacuation could be delayed for days. During this time, burn wounds can become infected, detrimentally impact neighboring tissue, and cause systemic immune responses. Therefore, it is essential to test and evaluate non-surgical debridement agents that could be implemented prior to reaching a Role 3 military treatment facility. This work details how the proprietary proteolytic gel SN514 impacts burn debridement when applied within a PFC-like timeline. SN514 contains an enzyme formulation that is thermostable, easy to apply, and selectively degrades non-viable tissue in vitro and in vivo. Methods Deep-partial thickness contact burns were created using an established porcine model and covered with gauze or an antimicrobial incise drape. Four days later, the burns were treated with one of five treatments: 0.2% SN514, 0.8% SN514, a vehicle control, gauze, or an antimicrobial silver dressing. Treatments were re-applied every 24 hours for 72 to 96 hours. The effects of the treatment regiments were compared histologically. Biopsies were also taken to monitor bacterial contamination levels. Results Burns treated with SN514 were partially debrided and visually distinct from those treated with gauze, the silver dressing, or the vehicle control. Preliminary analyses suggest that SN514-treated burns that had been covered with “dry” gauze had a much lower debridement efficiency than those treated with the incise drape. This suggests that SN514 debridement efficiency may depend on the presence of a moist eschar. Preliminary analyses also suggest that there was little difference in burn wound bacterial counts among the five treatment groups. Conclusions SN514 is able to debride burns that experienced delayed treatment, without any evidence of harm to the surrounding tissue or evidence of exacerbating the original burn injury. SN514-treated wounds displayed little to no blood loss and did not increase burn wound infection levels compared to wounds treated with gauze or an antimicrobial silver dressing.


2008 ◽  
Vol 19 (5) ◽  
pp. 693-707 ◽  
Author(s):  
Z. C. C. Chen ◽  
A. K. Ekaputra ◽  
K. Gauthaman ◽  
P. G. Adaikan ◽  
H. Yu ◽  
...  

2017 ◽  
Vol 242 (18) ◽  
pp. 1765-1771 ◽  
Author(s):  
Guinea BC Cardoso ◽  
Erivelto Chacon ◽  
Priscila GL Chacon ◽  
Pedro Bordeaux-Rego ◽  
Adriana SS Duarte ◽  
...  

Our hypothesis was to investigate the fatty acid potential as a bone induction factor. In vitro and in vivo studies were performed to evaluate this approach. Oleic acid was used in a 0.5 wt.% concentration. Polycaprolactone was used as the polymeric matrix by combining solvent-casting and particulate-leaching techniques, with a final porosity of 70 wt.%, investigated by SEM images. Contact angle measurements were produced to investigate the influence of oleic acid on polycaprolactone chains. Cell culture was performed using adipocyte-derived stem cells to evaluate biocompatibility and bioactivity properties. In addition, in vivo studies were performed to evaluate the induction potential of oleic acid addition. Adipocyte-derived stem cells were used to provide differentiation after 21 days of culture. Likewise, information were obtained with in vivo data and cellular invagination was observed on both scaffolds (polycaprolactone and polycaprolactone /oleic acid); interestingly, the scaffold with oleic acid addition demonstrated that cellular migrations are not related to the surrounding tissue, indicating bioactive potential. Our hypothesis is that fatty acid may be used as a potential induction factor for bone tissue engineering. The study’s findings indicate oleic acid as a possible agent for bone induction, according to data on cell differentiation, proliferation, and migration. Impact statement The biomaterial combined in this study on bone regeneration is innovative and shows promising results in the treatment of bone lesions. Polycaprolactone (PCL) and oleic acid have been studied separately. In this research, we combined biomaterials to assess the stimulus and the speed of bone healing.


2020 ◽  
Author(s):  
Erfan Dashtimoghadam ◽  
Farahnaz Fahimipour ◽  
Andrew Keith ◽  
Foad Vashahi ◽  
Pavel Popryadukhin ◽  
...  

Abstract Current materials used in biomedical devices do not match tissue’s mechanical properties and leach various chemicals into the body. These deficiencies pose significant health risks that are further exacerbated by invasive implantation procedures. Herein, we leverage the brush-like polymer architecture to design and administer minimally invasive injectable elastomers that cure in vivo into leachable-free implants with mechanical properties matching the surrounding tissue. This strategy allows tuning curing time from minutes to hours, which empowers a broad range of biomedical applications from rapid wound sealing to time-intensive reconstructive surgery. These injectable elastomers support in vitro cell proliferation, while also demonstrating in vivo implant integrity with a mild inflammatory response and minimal fibrotic encapsulation.


2013 ◽  
Vol 113 (suppl_1) ◽  
Author(s):  
Ling Tao ◽  
Yi Liu ◽  
Chao Xin ◽  
Weidong Huang ◽  
Lijian Zhang ◽  
...  

FNDC5 is a hormone secreted by myocytes that could reduce obesity and insulin resistance, However, the exact effect of FNDC5 on glucose and lipid metabolism remain poorly identified; More importantly, the signaling pathways that mediate the metabolic effects of FNDC5 is completely unknown. Here we showed that FNDC5 stimulates β-oxidation and glucose uptake in C2C12 cells in a dose- and time-dependent fashion in vitro (n=8, all P<0.01). In vivo study revealed that FNDC5 also enhanced glucose tolerance in diabetic mice and increased the glucose uptake evidenced by increased [18F] FDG accumulation in hearts by PET scan (n=6, all P<0.05). FNDC5 decreased the expression of gluconeogenesis related molecules (PEPCK and G6Pase) and increased the phosphorylation of ACC, a key modulator of fatty-acid oxidation, both in hepatocytes and C2C12 cells (n=3, all P<0.05). In parallel with its stimulation of β-oxidation and glucose uptake, FNDC5 increased the phosphorylation of AMPK both in hepatocytes and C2C12 cells in a dose- and time-dependent fashion in vitro and in vivo. More importantly, the β-oxidation and glucose uptake, the expression of PEPCK and G6Pase and the phosphorylation of ACC induced by FNDC5 were attenuated by AMPK inhibitor in hepatocytes and C2C12 cells (P<0.05). Most importantly, the FNDC5 induced glucose uptake and phosphorylation of ACC were attenuated in AMPK-DN mice (n=6, all P<0.05). The glucose-lowering effect of FNDC5 in diabetic mice was also attenuated by AMPK inhibitor. Our data presents the direct evidence that FNDC5 stimulates glucose utilization and fatty-acid oxidation by AMPK signaling pathway, suggesting that FNDC5 be a novel pharmacological approach for type 2 diabetes.


Sign in / Sign up

Export Citation Format

Share Document