scholarly journals Development of Low-Cost Spectrophotometry Laboratory Practice Based on the Digital Image for Analytical Chemistry Subject

Author(s):  
M. Lutfi Firdaus ◽  
Deni Parlindungan ◽  
Agus Sundaryono ◽  
Muhammad Farid ◽  
Lena Rahmidar ◽  
...  
2019 ◽  
Vol 3 (1) ◽  
pp. 23-28 ◽  
Author(s):  
Bianca Marco ◽  
Ana Kogawa ◽  
Hérida Salgado

Cefadroxil, an oral antimicrobial, presents few techniques optimized for the reduction of solvents and toxic residues and/or non-use of them. So, a quantitative, new and miniaturized method for determination of cefadroxil monohydrate in capsules has been developed and validated by spectrophotometric method in the visible region according to the international guidelines. The analyzes were performed using microplates containing 96 wells, 1 % of phenolphthalein and sodium hydroxide 0.1 M as reagent at 552 nm. The method was (i) linear in the range of 15-115 µg mL-1, (ii) selective when comparing standard, sample, adjuvants and color reagent, (iii) precise with deviations below 4 %, (iv) accurate when comparing the proposed method with the HPLC method, (v) robusts by making small and deliberate modifications to the method, (vi) besides being fast, low cost, eco-friendly and generates minimal amount of waste. The method can be applied to the routine quality control of cefadroxil monohydrate in capsules and an effective and accessible alternative that contemplates the concepts of current and sustainable green analytical chemistry.


Beverages ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 65
Author(s):  
Rachel L. Burns ◽  
Raegan Alexander ◽  
Liliya Snaychuk ◽  
John C. Edwards ◽  
Neil Fitzgerald ◽  
...  

The Chinese spirit baijiu is currently the world’s bestselling spirit, with more than ten billion liters sold in 2018. This is a figure that puts its sales higher than whiskey, vodka, gin, and tequila combined. The multitude of baijiu varieties available in the market differ in several ways ranging from aging to the traditional artisanship involved in producing the final spirit to several other features, including the rarity of the bottle. A result of these differences is a wide distribution of prices for the various baijiu products. Consequently, a single bottle of baijiu can cost anywhere from a few dollars, up to thousands of US dollars. The price differences among the various baijiu spirits necessitate the existence of reliable scientific methods that can efficiently differentiate and authenticate the qualities of baijiu spirits. In addition, the existence of such methods facilitates the prevention of counterfeit sales of the final product. Considering this, we introduce an analytical chemistry method that distinguishes amongst different baijiu spirits based on fluorescence spectroscopy. Its attributes include the low cost and convenience that allows analysis either before or while the spirit is in the market. Our work herein focuses on the analysis of thirty different varieties of baijiu spirits from six different distilleries from East Asia and North America by fluorescence emission spectroscopy, which is associated to the price of the product. For the analysis, we employed a HORIBA FLUOROLOG 3 (HORIBA—Jobin Yvon) spectrometer. Major advantages of this method include the low cost, as no consumables except a quartz reusable cuvette are required, the minimal waste, and finally the quick processing of data.


Nanophotonics ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 167-176 ◽  
Author(s):  
Jinfeng Zhu ◽  
Xizhao Chen ◽  
Yinong Xie ◽  
Jun-Yu Ou ◽  
Huanyang Chen ◽  
...  

AbstractOptical measurement of materials at the nanoscale is important for nanotechnology. Various plasmonic nanorulers have been studied for measuring nanoscale distance and orientation of materials, but they lack the capability to contain and measure nanoscale volumes, especially for liquid or soft materials. Here, we demonstrate the use of imprinted plasmonic volumetric nanocylinders, which act as nanoscale graduated cylinders and facilitate nanomaterial measurement via visible light. Our theoretical and experimental achievements illuminate a promising method for non-destructive, low-cost and fast measurement of material volume changes at the nanoscale, which will benefit the fields of analytical chemistry, nanofabrication and biomedical sensing.


2011 ◽  
Vol 23 (1) ◽  
pp. 178
Author(s):  
A. Martinez ◽  
G. Tovar ◽  
C. Estrada ◽  
E. Esperon ◽  
S. Romo

The objective of this work is to describe a hands-on laboratory session for surgical embryo collection and transfer using rabbits as a model. Rabbits are characterised for their low purchase price, easy handling, and low maintenance, thus allowing their use as a tool for embryo transfer teaching and for its potential application in other species, such as the bovine, ovine, and caprine. These are important reasons in countries where the use of low-cost techniques and animal models is a must. Two females of the New Zealand breed were used as donors and one female of the Chinchilla breed was used as recipient. All females were healthy and multiparous. Three days after receiving natural service by a male, the donors were anesthetized (by injection of xylazine hydrochloride, 1.1 mg kg–1 IM, then sodium pentobarbital, 30 mg kg–1 IV), and ovariohysterectomy surgery was performed on each one. Each uterine horn was flushed 3 times with Ringer’s lactate (Hartmann) solution. Using a stereoscopic microscope, we searched for embryos and then placed them in a Petri dish for evaluation and selection. Once selected, embryos were moved to a 6-well dish containing 0.5 mL of a commercially available holding solution and washed 3 times. Twenty-one grades 1, 2, and 3 embryos were recovered and evaluated, showing developmental stages 1 to 6, according to IETS. The recipient female was anesthetized, and by laparotomy, her uterine horns were exteriorized to transfer a total of 15 grade 1 embryos with development stages 4 to 6. Pregnancy diagnosis was performed by real-time ultrasound on Days 10 and 20 post-transfer, with positive results. The transferred embryos induced a 34-day pregnancy, including 3 days of embryo development within the donors. Parturition was normal and without problems; 2 live offspring were born, with normal weight and size. The technique, used for teaching purposes, was successfully performed by 3 graduate students directed by 2 professors. The use of rabbits as a teaching model was efficient and the total cost of the laboratory practice was low, as compared with the use of other domestic species. The handling of the females and their offspring was easy, the feeding costs were low, and the practical laboratory session was fulfilled. It is proposed that the rabbit species be used for teaching surgical embryo collection and transfer to graduate and undergraduate students in underdeveloped and developing countries, where low-cost teaching models are of the utmost importance.


1994 ◽  
Vol 161 ◽  
pp. 183-184
Author(s):  
P. Kroll ◽  
P. Neugebauer

DIA (Digital Image Analyzer) is a new dedicated and low cost CCD line scanner, which has been invented at Sonneberg Observatory in collaboration with the Institute for Theoretical Astrophysics at Tübingen for scanning selected fields of the Sonneberg Plate Archive.


2018 ◽  
Vol 8 (1) ◽  
pp. 2555-2561
Author(s):  
S. Gupta ◽  
N. Mohan

Digital image forgery has become extremely easy as low-cost image processing programs are readily available. Digital image forensics is a science of classifying images as authentic or manipulated. This paper aims at implementing a novel digital image forensics technique by exploiting an image’s Color Channel Characteristics (CCC). The CCCs considered are the noise and edge characteristics of the image. Averaging, median, Gaussian and Wiener filters along with Sobel, Canny, Prewitt and Laplacian of Gaussian (LoG) edge detectors are applied to get the noise and texture features. A complete, no reference, blind classifier for image tamper detection has been proposed and implemented. The proposed CCC classifier can detect copy-move as well as image splicing accurately with lower dimensionality. Support Vector Machine is used for classification of images as authentic or tampered. Experimental results have shown that the proposed technique outperforms the existing ones and may serve as a complete tool for digital image forensics.


2021 ◽  
Vol 7 (9) ◽  
pp. 89944-89956
Author(s):  
Jéssica da Silva Alves De Pinho ◽  
Jean de Aguiar Seabra ◽  
Rodrigo Ventura Nunes Da Silva ◽  
Carlos Alberto Nunes Cosenza

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
M. Arza-García ◽  
C. Núñez-Temes ◽  
J. A. Lorenzana ◽  
J. Ortiz-Sanz ◽  
A. Castro ◽  
...  

AbstractDue to their cost, high-end commercial 3D-DIC (digital image correlation) systems are still inaccessible for many laboratories or small factories interested in lab testing materials. These professional systems can provide reliable and rapid full-field measurements that are essential in some laboratory tests with high-strain rate events or high dynamic loading. However, in many stress-controlled experiments, such as the Brazilian tensile strength (BTS) test of compacted soils, samples are usually large and fail within a timeframe of several minutes. In those cases, alternative low-cost methods could be successfully used instead of commercial systems. This paper proposes a methodology to apply 2D-DIC techniques using consumer-grade cameras and the open-source image processing software DICe (Sandia National Lab) for monitoring the standardized BTS test. Unlike most previous studies that theoretically estimate systematic errors or use local measures from strain gauges for accuracy assessment, we propose a contrast methodology with independent full-field measures. The displacement fields obtained with the low-cost system are benchmarked with the professional stereo-DIC system Aramis-3D (GOM GmbH) in four BTS experiments using compacted soil specimens. Both approaches proved to be valid tools for obtaining full-field measurements and showing the sequence of crack initiation, propagation and termination in the BTS, constituting reliable alternatives to traditional strain gauges. Mean deviations obtained between the low-cost 2D-DIC approach and Aramis-3D in measuring in-plane components were 0.08 mm in the perpendicular direction of loading (ΔX) and 0.06 mm in the loading direction (ΔY). The proposed low-cost approach implies considerable savings compared to commercial systems.


Sign in / Sign up

Export Citation Format

Share Document