scholarly journals Bezier and Trigonometric Bezier with a Shape Parameter Curve in Designing 3-Dimensional Objects Using Rotational Sweep Surface Method

2019 ◽  
Vol 8 (1.5) ◽  
pp. 35-39
Author(s):  
Noor Khairiah Binti Razali ◽  
Keyword(s):  
Shape Parameter ◽  
3 Dimensional ◽  
Surface Method ◽  
Sweep Surface

scholarly journals Irregular Symmetrical Object Designed By Using Lambda Miu B-Spline Degree Four

2021 ◽  
Vol 2084 (1) ◽  
pp. 012018
Author(s):  
Nursyazni Binti Mohamad Sukri ◽  
Puteri Ainna Husna Binti Megat Mohd ◽  
Siti Musliha Binti Nor-Al-Din ◽  
Noor Khairiah Binti Razali
Keyword(s):  
Shape Parameter ◽  
B Spline ◽  
3 Dimensional ◽  
B Splines ◽  
Spline Curve ◽  
Geometry Design ◽  
Actual Volume ◽  
Symmetrical Object ◽  
Sweep Surface ◽  
Improved Methods

Abstract In Computer Aided Geometry Design (CAGD), B-splines curves are piecewise polynomial parametric curves that play an important role. CAGD involves the interpolation and approximation curves and surfaces. CAGD has been widely used which brings good impact of computers to industries in manufacturing. There are many improved methods in the B-spline curve such as extended cubic B-spline, trigonometric B-spline, quasi trigonometric B-spline, and λμ-B-spline. Each of the methods has its behaviour and advantage. In this paper, λμ-B-spline was used to be implemented in generating irregular symmetrical objects. λμ-B-spline has a shape parameter that can change the global shape by manipulating the value of the shape parameter. The bottle has been chosen as an irregular symmetrical object. The 2-dimensional symmetrical curves of Bottle design were formed by using λμ-B-spline degree 4. The curves designed are dependent on the shape parameter which can be adjusted. Then, the curves generated were revolved using the Sweep Surface method to form 3-dimensional objects. Every object has its volume and this research focused on the numerical method which was Simpson’s 3/8 to compute the volume. The volumes obtained were compared to the actual volume to determine the best shape parameter used. The results show that the λμ-B-spline curve with a shape parameter of 1 is the best shape parameter in designing symmetrical irregular objects with the desired volume.

scholarly journals Cubic Curve Fitting Method in Reconstruction of Chinese Calligraphy Outline

2021 ◽  
Vol 2084 (1) ◽  
pp. 012020
Author(s):  
Noor Khairiah Binti Razali ◽  
Nur Nabilah Binti Che Draman ◽  
Siti Musliha Binti Nor-Al-Din ◽  
Nursyazni Binti Mohamad Sukri
Keyword(s):  
Shape Parameter ◽  
Chinese Calligraphy ◽  
B Spline ◽  
3 Dimensional ◽  
Control Polygon ◽  
Cubic Curve ◽  
Fitting Method ◽  
Trigonometric Spline ◽  
Curve Fitting Method ◽  
Time Required

Abstract Curve plays a significant role in CAGD and brings the good impact of computers to manufacturing industries in designing 2 and 3-dimensional shapes and objects. Reconstruction of Chinese calligraphy outline based on the actual character is presented in this paper. Chinese calligraphy is the stylized artistic writings of Chinese characters. It is believed that this writing may help to express the feelings and ideas of the writers, which are difficult to be described. The shapes, smooth lines, and perfect curves are among the important qualities which are particularly emphasized in selecting good Chinese calligraphy. The Cubic B-Spline, Cubic Trigonometric Spline, and Cubic Trigonometric Bezier were used to generate the curves. The factors that have influenced the effects of the curves modifications were examined based on the changes of control polygon and the values of shape parameter. The fastest approach was then chosen by measuring the processing time required to construct the complete design. Results show the Cubic Trigonometric Bezier curve produced the closest curves to the control polygon, accurate to the actual character with λ = 1 and CPU time taken is 2.032 seconds. This is followed by Cubic Trigonometric Spline and Cubic B-Spline.

Three-Dimensional Reconstruction Using Stereo Pairs from Serial Thick Sections

1977 ◽  
Vol 35 ◽  
pp. 562-563
Author(s):  
Robert Glaeser ◽  
Thomas Bauer ◽  
David Grano
Keyword(s):  
Three Dimensional ◽  
Dimensional Structure ◽  
Serial Sections ◽  
Thin Sections ◽  
3 Dimensional ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Dimensional Reconstruction ◽  
Stereo Imagery ◽  
Whole Mounts

In transmission electron microscopy, the 3-dimensional structure of an object is usually obtained in one of two ways. For objects which can be included in one specimen, as for example with elements included in freeze- dried whole mounts and examined with a high voltage microscope, stereo pairs can be obtained which exhibit the 3-D structure of the element. For objects which can not be included in one specimen, the 3-D shape is obtained by reconstruction from serial sections. However, without stereo imagery, only detail which remains constant within the thickness of the section can be used in the reconstruction; consequently, the choice is between a low resolution reconstruction using a few thick sections and a better resolution reconstruction using many thin sections, generally a tedious chore. This paper describes an approach to 3-D reconstruction which uses stereo images of serial thick sections to reconstruct an object including detail which changes within the depth of an individual thick section.

Structural preservation and absolute contrast of catalase crystal sections prepared with tannic acid

1983 ◽  
Vol 41 ◽  
pp. 448-449
Author(s):  
C.W. Akey ◽  
M. Szalay ◽  
S.J. Edelstein
Keyword(s):  
Tannic Acid ◽  
Beef Heart ◽  
X Rays ◽  
Screw Axis ◽  
General Applicability ◽  
Thin Sections ◽  
Beef Liver ◽  
3 Dimensional ◽  
Dimensional Reconstruction ◽  
Structural Preservation

Three methods of obtaining 20 Å resolution in sectioned protein crystals have recently been described. They include tannic acid fixation, low temperature embedding and grid sectioning. To be useful for 3-dimensional reconstruction thin sections must possess suitable resolution, structural fidelity and a known contrast. Tannic acid fixation appears to satisfy the above criteria based on studies of crystals of Pseudomonas cytochrome oxidase, orthorhombic beef liver catalase and beef heart F1-ATPase. In order to develop methods with general applicability, we have concentrated our efforts on a trigonal modification of catalase which routinely demonstrated a resolution of 40 Å. The catalase system is particularly useful since a comparison with the structure recently solved with x-rays will permit evaluation of the accuracy of 3-D reconstructions of sectioned crystals.Initially, we re-evaluated the packing of trigonal catalase crystals studied by Longley. Images of the (001) plane are of particular interest since they give a projection down the 31-screw axis in space group P3121. Images obtained by the method of Longley or by tannic acid fixation are negatively contrasted since control experiments with orthorhombic catalase plates yield negatively stained specimens with conditions used for the larger trigonal crystals.

Deviations from Ideal Decagonal Symmetry in Electron Diffraction Patterns of the “Decagonal” Phase in the Al-Co-Cu Alloy System

1991 ◽  
Vol 49 ◽  
pp. 914-915
Author(s):  
Atul S. Ramani ◽  
Earle R. Ryba ◽  
Paul R. Howell
Keyword(s):  
Electron Microscope ◽  
Alloy System ◽  
Nominal Composition ◽  
Dimensional Lattice ◽  
3 Dimensional ◽  
Decagonal Phase ◽  
Cu Alloy ◽  
Transmission Electron ◽  
Lattice Periodicity ◽  
Diffraction Patterns

The “decagonal” phase in the Al-Co-Cu system of nominal composition Al65CO15Cu20 first discovered by He et al. is especially suitable as a topic of investigation since it has been claimed that it is thermodynamically stable and is reported to be periodic in the dimension perpendicular to the plane of quasiperiodic 10-fold symmetry. It can thus be expected that it is an important link between fully periodic and fully quasiperiodic phases. In the present paper, we report important findings of our transmission electron microscope (TEM) study that concern deviations from ideal decagonal symmetry of selected area diffraction patterns (SADPs) obtained from several “decagonal” phase crystals and also observation of a lattice of main reflections on the 10-fold and 2-fold SADPs that implies complete 3-dimensional lattice periodicity and the fundamentally incommensurate nature of the “decagonal” phase. We also present diffraction evidence for a new transition phase that can be classified as being one-dimensionally quasiperiodic if the lattice of main reflections is ignored.

A Novel Reconstitution Method for Inducing the Formation of Regular 2-Dimensional Arrays of Membrane Proteins and Lipids

1988 ◽  
Vol 46 ◽  
pp. 152-153 ◽  
Author(s):  
A. Engel ◽  
A. Holzenburg ◽  
K. Stauffer ◽  
J. Rosenbusch ◽  
U. Aebi
Keyword(s):  
Membrane Proteins ◽  
Flow Rate ◽  
Lipid Membranes ◽  
Functional Characterization ◽  
Dimensional Structure ◽  
Electron Crystallography ◽  
Peltier Element ◽  
Protein Ratio ◽  
Precise Control ◽  
3 Dimensional

Reconstitution of solubilized and purified membrane proteins in the presence of phospholipids into vesicles allows their functions to be studied by simple bulk measurements (e.g. diffusion of differently sized solutes) or by conductance measurements after transformation into planar membranes. On the other hand, reconstitution into regular protein-lipid arrays, usually forming at a specific lipid-to-protein ratio, provides the basis for determining the 3-dimensional structure of membrane proteins employing the tools of electron crystallography.To refine reconstitution conditions for reproducibly inducing formation of large and highly ordered protein-lipid membranes that are suitable for both electron crystallography and patch clamping experiments aimed at their functional characterization, we built a flow-dialysis device that allows precise control of temperature and flow-rate (Fig. 1). The flow rate is generated by a peristaltic pump and can be adjusted from 1 to 500 ml/h. The dialysis buffer is brought to a preselected temperature during its travel through a meandering path before it enters the dialysis reservoir. A Z-80 based computer controls a Peltier element allowing the temperature profile to be programmed as function of time.

Structure and Interaction of Protamine by Dark Field Electron Microscopy

1976 ◽  
Vol 34 ◽  
pp. 160-161
Author(s):  
D.P. Bazett-Jones ◽  
F.P. Ottensmeyer
Keyword(s):  
Electron Microscopy ◽  
Dark Field ◽  
Amino Acid Sequences ◽  
Dimensional Structure ◽  
3 Dimensional ◽  
Field Electron ◽  
Proposed Model ◽  
Field Electron Microscopy ◽  
Dark Field Electron ◽  
Positively Charged

It has been shown for some time that it is possible to obtain images of small unstained proteins, with a resolution of approximately 5Å using dark field electron microscopy (1,2). Applying this technique, we have observed a uniformity in size and shape of the 2-dimensional images of pure specimens of fish protamines (salmon, herring (clupeine, Y-l) and rainbow trout (Salmo irideus)). On the basis of these images, a model for the 3-dimensional structure of the fish protamines has been proposed (2).The known amino acid sequences of fish protamines show stretches of positively charged arginines, separated by regions of neutral amino acids (3). The proposed model for protamine structure (2) consists of an irregular, right-handed helix with the segments of adjacent arginines forming the loops of the coil.

Design and calibration of an IVEM for general 3-dimensional imaging of non-diffracting materials

1992 ◽  
Vol 50 (2) ◽  
pp. 1040-1041
Author(s):  
Neil Rowlands ◽  
Jeff Price ◽  
Michael Kersker ◽  
Seichi Suzuki ◽  
Steve Young ◽  
...  
Keyword(s):  
3D Imaging ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3 Dimensional ◽  
3D Microstructure ◽  
Image Translation ◽  
Digital Correlation ◽  
On Line ◽  
Mechanical Stage ◽  
Projection Angle

Three-dimensional (3D) microstructure visualization on the electron microscope requires that the sample be tilted to different positions to collect a series of projections. This tilting should be performed rapidly for on-line stereo viewing and precisely for off-line tomographic reconstruction. Usually a projection series is collected using mechanical stage tilt alone. The stereo pairs must be viewed off-line and the 60 to 120 tomographic projections must be aligned with fiduciary markers or digital correlation methods. The delay in viewing stereo pairs and the alignment problems in tomographic reconstruction could be eliminated or improved by tilting the beam if such tilt could be accomplished without image translation.A microscope capable of beam tilt with simultaneous image shift to eliminate tilt-induced translation has been investigated for 3D imaging of thick (1 μm) biologic specimens. By tilting the beam above and through the specimen and bringing it back below the specimen, a brightfield image with a projection angle corresponding to the beam tilt angle can be recorded (Fig. 1a).

Sign in / Sign up

Export Citation Format

Share Document