Mechanical Properties of Modified Engineered Cementitious Composites (MECC) Incorporating Marble Dust

2021 ◽  
Vol 9 (8) ◽  
pp. 1140-1146
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Bottom Surface ◽  
Cementitious Composites ◽  
Strength Development ◽  
Shape Effect ◽  
Main Concern ◽  
Engineered Cementitious Composites ◽  
Flexure Strength ◽  
Marble Dust

Engineered cementitious composites (ECC) are a type of high-performance fiber reinforced cementitious composite. ECC has different applications in the construction field due to its inherent characteristics of high tensile strain. The main concern regarding ECC is its high cost. The content of cement is high contributing to its cost. In this research work, the cement in ECC is replaced with marble dust and its mechanical properties such as compressive strength and flexure strength have been assessed. For this purpose, both cubes and cylinders were tested at different test ages for finding the compressive strength development with time and observe the shape effect of specimens on the compressive strength of ECC mixes. Beam members were tested for finding the flexure strength of ECC mixes. Deflection gauge was also installed at the mid span on the bottom surface of the beams to find the maximum mid span deflection before failure. The compression test results of both cylinders and cubes revealed that using of marble dust has negative effect on the compressive strength of ECC. The flexure strength result showed that marble dust can be used up to some extent replacing cement will increase the flexure strength. The result of mid span deflection suggests that by incorporating marble dust in ECC, its ductility increases.

scholarly journals Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

2018 ◽  
Author(s):  
Wei Zhang ◽  
Chenglong yin ◽  
Fuquan Ma ◽  
Zhiyi Huang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Polyvinyl Alcohol ◽  
Bending Strength ◽  
Impact Resistance ◽  
Steel Corrosion ◽  
Fiber Content ◽  
Uniaxial Tensile ◽  
Cementitious Composites ◽  
Engineered Cementitious Composites

Herein, the mechanical properties and carbonation durability of engineered cementitious composites (ECC) were studied. For cost-efficient utilization of ECC materials, polypropylene (PP) and hydrophilic polyvinyl alcohol (PVA) fibers were employed to cast different types of specimens. The compressive strength, Poisson’s ratio, strength-deflection curves, cracking/post-cracking strength, impact index, and tensile strain-stress curves of the two types of ECC materials, with different fiber contents of 0 vol%, 1 vol%, 1.5 vol% and 2 vol%, were investigated by conducting compressive tests, four-point bending tests, drop weight tests, and uniaxial tensile tests. In addition, the matrix microstructure and failure morphology of the fiber in the ECC materials were studied by scanning electron microscopy (SEM) analysis. Furthermore, carbonation test and steel corrosion after carbonization were employed to study durability resistance. The results indicated that for both PP fiber- and hydrophilic PVA fiber-reinforced ECCs, the compressive strength first increases and then decreases as fiber content increases from 0 vol% to 2 vol% and reaches the maximum at 1 vol% fiber content. The bending strength, deformation capacity, and impact resistance show significant improvement with increasing fiber contents. The ECC material reinforced with 2 vol% PP fiber shows superior carbonized durability with maximum carbonation depth of only 0.8 mm.

Evaluation of the Design Mix Proportion on Mechanical Properties of Engineered Cementitious Composites

2018 ◽  
Vol 775 ◽  
pp. 589-595 ◽  
Author(s):  
Lee Siong Wee ◽  
Oh Chai Lian ◽  
Mohd Raizamzamani Md Zain
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fiber Content ◽  
Flexural Behavior ◽  
Bending Test ◽  
Cementitious Composites ◽  
Sand Content ◽  
Flexural Behaviour ◽  
Normal Concrete ◽  
Engineered Cementitious Composites

This paper investigates the mechanical properties of engineered cementitious composites (ECC) in terms of compressive strength and flexural behaviour. A new version of ECC made of cement, ground granulated blast-furnace slag (GGBS), local sand, polypropylene (PP) fibers, water and superplasticizer (SP) was employed in this study. Few series of ECC mixtures were designed, cast, and tested in compression and flexural after 28 days of curing. The effect of the fiber content and sand content were studied in different cement-GGBS combination. Compression test results indicated that all ECC mixtures obtained at least 1.8 times compressive strength compared to normal concrete. They also demonstrated more ductile flexural behavior compared to normal concrete from three-point bending test. Increasing fiber content from 1.5% to 2.0% and 2.5% has negative effect on compressive strength but significantly improved modulus of toughness of ECC mixtures. The compressive strength of ECC was reduced when the sand to binder ratio adjusted to 0.4 and 0.6. The flexural behaviour of ECC was slightly improved with the increasing of sand content.

Effect of freeze and thaw cycle on the mechanical properties of engineered cementitious composites with un-oiled fibers containing liquid and solid polymers

2022 ◽  
pp. 002199832110386
Author(s):  
Hadi Azadmanesh ◽  
Seyed Amir Hossein Hashemi ◽  
Seyed Hooman Ghasemi
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Bending Test ◽  
Styrene Butadiene Rubber ◽  
Uniaxial Tensile ◽  
Flexural Properties ◽  
Cementitious Composites ◽  
Engineered Cementitious Composites ◽  
Freeze And Thaw ◽  
Thaw Cycle

Nowadays, the application of the engineered cementitious composites(ECC) is expected to highly develop. Due to the lack of access to oiled- polyvinyl alcohol (PVA) fibers in many parts of the world, the implementation of the ECC has contained many difficulties. In this study, to increase the mechanical properties of ECC with the use of un-oiled PVA fibers, the polymers of styrene butadiene rubber (SBR), and ethylene vinyl acetate (EVA) were taken into account to resolve the abovementioned issue. Herein, also in order to enhance the tensile and flexural properties of ECC, the cement was replaced by polymers. Accordingly, a total of 7 mix designs were planned to conduct the proposed tests. The compressive strength, uniaxial tensile strength, and three-point bending tests were performed on the ECC at their 28-day age with consideration of the freeze and thaw cycle. The results of this research illustrated that the use of polymers can enhance the tensile and flexural properties of the ECC with un-oiled PVA fibers. The tensile strain in this study increased by more than 3% after the application of the polymers. Furthermore, the compressive strength increased by more than 47 MPa, and the deflection at the mid-span reached more than 9 mm in the bending test. However, the results showed that the use of polymers was effective on the freeze and thaw cycle and almost preserved the mechanical properties of the ECC. SBR latex has higher compatibility with the ECC in comparison with EVA powder.

scholarly journals Test research on mechanical properties of engineered cementitious composites

2021 ◽  
Vol 647 ◽  
pp. 012071
Author(s):  
Shuaiyu Wang ◽  
Hongxiu Du ◽  
Jingjing Lv ◽  
Jun Guo ◽  
Guoyang Yue ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cementitious Composites ◽  
Engineered Cementitious Composites

Mechanical Properties and Thermal Conductivity of Lightweight Clay Bricks Fabricated with a Powdered Marble Dust Additive

2018 ◽  
Vol 777 ◽  
pp. 465-470
Author(s):  
Sutas Janbuala ◽  
Mana Eambua ◽  
Arpapan Satayavibul ◽  
Watcharakhon Nethan
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Water Absorption ◽  
Bulk Density ◽  
Firing Temperature ◽  
Apparent Porosity ◽  
Clay Brick ◽  
Clay Bricks ◽  
Marble Dust

The objective of this study was to recycle powdered marble dust to improve mechanical properties and thermal conductivity of lightweight clay bricks. Varying amounts of powdered marble dust (10, 20, 30, and 40 vol.%) were added to a lightweight clay brick at the firing temperatures of 900, 1000, and 1100 °C. When higher quantities of powdered marble dust were added, the values of porosity and water absorption increased while those of thermal conductivity and bulk density decreased. The decrease in apparent porosity and water absorption were also affected by the increase in firing temperature. The most desirable properties of the clay bricks were obtained for the powdered marble dust content of 40 vol.% and firing temperature 900 °C: bulk density of 1.20 g/cm3, compressive strength 9.2 MPa, thermal conductivity 0.32 W/m.K, and water absorption 22.5%.

Mechanical Performances of Green Engineered Cementitious Composites Incorporating Various Types of Sand

2019 ◽  
Vol 821 ◽  
pp. 512-517
Author(s):  
Siong Wee Lee ◽  
Chai Lian Oh ◽  
Mohd Raizamzamani Md Zain ◽  
Norrul Azmi Yahya ◽  
Azerai Ali Rahman
Keyword(s):  
Compressive Strength ◽  
Recycled Concrete ◽  
Cementitious Composites ◽  
Flexural Stress ◽  
Engineered Cementitious Composites ◽  
River Sand ◽  
Granulated Blast Furnace Slag ◽  
In Series ◽  
Mechanical Performances ◽  
Flexural Tests

This paper evaluates the mechanical performances of green engineered cementitious composites (ECC) by means of compressive strength and flexural behaviour. Green ECC made of cement, ground granulated blast-furnace slag (GGBS), river sand or recycled concrete fine (RCF), polypropylene (PP) fiber, water and superplasticizer (SP) was employed in this study. Compression test result implies that green ECC incorporating either sieved river sand or sieved RCF (below 600 μm) in series G60 and G70 exhibited greater compressive strength compared with green ECC with unsieved river sand. In series G80, compressive strength of green ECC was not affected by RCF content. Flexural stress-mid deflection curves demonstrated that all green ECC specimens performed more ductile compared to normal concrete as they undergone large deformation capacity after the first cracking strength. Both compression and flexural tests suggested that mixture G80SRCF0.4 containing large amount of sieved RCF and least amount of cement is the best green ECC mixture in this study.

Sign in / Sign up

Export Citation Format

Share Document