scholarly journals The Cross-sectional Morphology of the Mandible in the Premolar Region: A Retrospective Cone-Beam Computed Tomography Study

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Jake Samuels
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Cross Sectional ◽  
The Cross

scholarly journals A new classification of cross-sectional root canal shape changes, a cone-beam computed tomography study

2020 ◽  
Author(s):  
Svetlana Razumova ◽  
Anzhela Brago ◽  
Haydar Barakat ◽  
Ammar Howijieh ◽  
Yuliya Kozlova ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Age Groups ◽  
Cone Beam ◽  
New Classification ◽  
Cross Sectional ◽  
The Cross ◽  
Shape Changes

Abstract Background: The root canal system is considering the most important factor in endodontic treatment, due to the complexity of its anatomy and morphology. The aim of this study was to present a new classification of root canal shape changes in three thirds (coronal, middle, apical) in different age groups using cone-beam computed tomography scanning.Materials and methods: 300 CBCT scans for patient aged 20-70 were evaluated to study the morphology of the cross-sectional root canal shape in coronal, middle and apical thirds among three age groups; young (20-44), middle (45-59) and elderly (60-70). The root canal shape was classified as follow: round, oval, ribbon. Results: The cross-sectional root canal shape was identified in two groups: canals with an unchanging (constant) shape and canals with changing shape. In turn, in canals with changing shape, the change could be identified in the region of the middle or apical thirds of the canal. The results showed that root canal shape changes in two cases: 1) the presence of one or more canals in the root (with or without isthmus between them), 2) with age, as it was observed that the cross-sectional shape of the root canal becomes round in the apical third with age.Conclusion: A new classification of the changes of root canal shape in three thirds (coronal, middle, apical) was presented in this study.

scholarly journals Accuracy and Reproducibility of Facial Measurements of Digital Photographs and Wrapped Cone Beam Computed Tomography (CBCT) Photographs

Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 757
Author(s):  
Maged Sultan Alhammadi ◽  
Abeer Abdulkareem Al-mashraqi ◽  
Rayid Hussain Alnami ◽  
Nawaf Mohammad Ashqar ◽  
Omar Hassan Alamir ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Soft Tissue ◽  
Cone Beam Computed Tomography ◽  
High Reliability ◽  
Three Dimensional ◽  
Cone Beam ◽  
Cross Sectional ◽  
Facial Profile ◽  
Digital Photographs ◽  
Gonial Angle

The study sought to assess whether the soft tissue facial profile measurements of direct Cone Beam Computed Tomography (CBCT) and wrapped CBCT images of non-standardized facial photographs are accurate compared to the standardized digital photographs. In this cross-sectional study, 60 patients with an age range of 18–30 years, who were indicated for CBCT, were enrolled. Two facial photographs were taken per patient: standardized and random (non-standardized). The non-standardized ones were wrapped with the CBCT images. The most used soft tissue facial profile landmarks/parameters (linear and angular) were measured on direct soft tissue three-dimensional (3D) images and on the photographs wrapped over the 3D-CBCT images, and then compared to the standardized photographs. The reliability analysis was performed using concordance correlation coefficients (CCC) and depicted graphically using Bland–Altman plots. Most of the linear and angular measurements showed high reliability (0.91 to 0.998). Nevertheless, four soft tissue measurements were unreliable; namely, posterior gonial angle (0.085 and 0.11 for wrapped and direct CBCT soft tissue, respectively), mandibular plane angle (0.006 and 0.0016 for wrapped and direct CBCT soft tissue, respectively), posterior facial height (0.63 and 0.62 for wrapped and direct CBCT soft tissue, respectively) and total soft tissue facial convexity (0.52 for both wrapped and direct CBCT soft tissue, respectively). The soft tissue facial profile measurements from either the direct 3D-CBCT images or the wrapped CBCT images of non-standardized frontal photographs were accurate, and can be used to analyze most of the soft tissue facial profile measurements.

scholarly journals Intraoperative cone beam computed tomography for detecting residual stones in percutaneous nephrolithotomy: a feasibility study

Urolithiasis ◽  
2021 ◽  
Author(s):  
R. A. Kingma ◽  
M. J. H. Voskamp ◽  
B. H. J. Doornweerd ◽  
I. J. de Jong ◽  
S. Roemeling
Keyword(s):  
Computed Tomography ◽  
Percutaneous Nephrolithotomy ◽  
Cone Beam Computed Tomography ◽  
University Hospital ◽  
Cone Beam ◽  
Cross Sectional ◽  
The Mean ◽  
Residual Stones ◽  
Residual Fragments

AbstractCone beam computed tomography (CBCT) provides multiplanar cross-sectional imaging and three-dimensional reconstructions and can be used intraoperatively in a hybrid operating room. In this study, we investigated the feasibility of using a CBCT-scanner for detecting residual stones during percutaneous nephrolithotomy (PCNL). Intraoperative CBCT-scans were made during PCNL procedures from November 2018 until March 2019 in a university hospital. At the point where the urologist would have otherwise ended the procedure, a CBCT-scan was made to image any residual fragments that could not be detected by either nephroscopy or conventional C-arm fluoroscopy. Residual fragments that were visualized on the CBCT-scan were attempted to be extracted additionally. To evaluate the effect of this additional extraction, each CBCT-scan was compared with a regular follow-up CT-scan that was made 4 weeks postoperatively. A total of 19 procedures were analyzed in this study. The mean duration of performing the CBCT-scan, including preparation and interpretation, was 8 min. Additional stone extraction, if applicable, had a mean duration of 11 min. The mean effective dose per CBCT-scan was 7.25 mSv. Additional extraction of residual fragments as imaged on the CBCT-scan occurred in nine procedures (47%). Of the follow-up CT-scans, 63% showed a stone-free status as compared to 47% of the intraoperative CBCT-scans. We conclude that the use of CBCT for the detection of residual stones in PCNL is meaningful, safe, and feasible.

scholarly journals Comparison between C-arm cone beam computed tomography and interventional angiography in transarterial chemoembolization of hepatocellular carcinoma

2019 ◽  
Vol 50 (1) ◽  
Author(s):  
Ibraheim Ahmed Diab ◽  
Shaimaa Abdel-hamid Hassanein ◽  
Hala Hafez Mohamed
Keyword(s):  
Computed Tomography ◽  
Hepatocellular Carcinoma ◽  
Cone Beam Computed Tomography ◽  
Vascular Anatomy ◽  
Cone Beam ◽  
Focal Lesion ◽  
Focal Lesions ◽  
Conventional Angiography ◽  
Interventional Angiography ◽  
Cross Sectional

Abstract Background Hepatocellular carcinoma (HCC) is the most common primary hepatic malignancy of adults. One of the established treatment procedures performed worldwide for HCC is transcatheter arterial chemoembolization (TACE). By using conventional angiography in TACE, we can detect and identify the vascular anatomy of the liver through obtaining 2D images. Recently C-arm cone beam computed tomography (CBCT) is introduced for obtaining cross-sectional and three-dimensional (3D) images for better visualization of small tumors and their feeding arteries. Results The number of detected focal lesions by angiography was 51 compared to 87 focal lesion detected by CBCT; of those, 45 and 77 were active lesions by both procedures respectively. For lesions, less than 1 cm CBCT detected 23 lesions while angiography detected only one lesion. Angiography detected 87 feeding arterial branch while cone beam CT-HA detected 130 branches to the same number of target lesion. Feeder tractability and confidence were better by CBCT. Conclusion CBCT is superior to angiography in tumor detectability, detection of lesions less than 1 cm, feeder detection, and feeder traction; however, conventional angiography and DSA are irreplaceable. Thus, combination of CBCT with angiography during TACE produces better results and less complication.

scholarly journals Alveolar bone heights of maxillary central incisors in unilateral cleft lip and palate patients using cone-beam computed tomography evaluation

2021 ◽  
Author(s):  
Marcin Stasiak ◽  
Anna Wojtaszek-Słomińska ◽  
Bogna Racka-Pilszak
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Alveolar Bone ◽  
Contralateral Side ◽  
Cone Beam ◽  
Rank Test ◽  
Cross Sectional ◽  
Alveolar Bone Grafting

Abstract Purpose The aims of this retrospective cross-sectional study were to measure and compare labial and palatal alveolar bone heights of maxillary central incisors in unilateral cleft lip and palate patients, following STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) guidelines. Patients and methods The study group consisted of 21 patients with a mean age of 16 years. High-resolution cone-beam computed tomography was performed at least one year after secondary alveolar bone grafting. The experimental side was the cleft side and the contralateral side without congenital cleft was the control. Measurements were performed on incisors’ midsagittal cross-sections. The Wilcoxon signed-rank test was used for intergroup comparisons. Results The labial and palatal distances between alveolar bone crests and cementoenamel junctions were significantly greater on the cleft side than on the noncleft side. Mean differences were 0.75 and 1.41 mm, respectively. The prevalence of dehiscences at the cleft side maxillary central incisors was 52% on the labial surface and 43% on the palatal surface. In the controls, it was 19% and 14%, respectively. Conclusion The cleft-adjacent maxillary central incisors had more apically displaced alveolar bone crests on the labial and palatal sides of the roots than the controls. Higher prevalence of dehiscences was found on the cleft side. Bone margin differences predispose to gingival height differences of the central incisors. These differences could increase the demands of patients to obtain more esthetic treatment results with orthodontic extrusion and periodontal intervention on the cleft side.

scholarly journals Evaluation of the Relationship between Mandibular Third Molar and Mandibular Canal by Different Algorithms of Cone-beam Computed Tomography

2014 ◽  
Vol 15 (6) ◽  
pp. 740-745
Author(s):  
Mojdeh Mehdizadeh ◽  
Navid Ahmadi ◽  
Mahsa Jamshidi
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Inferior Alveolar Nerve ◽  
Third Molar ◽  
Mandibular Canal ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Cross Sectional ◽  
Mandibular Third Molar ◽  
The Relationship

ABSTRACT Objectives Exact location of the inferior alveolar nerve (IAN) bundle is very important. The aim of this study is to evaluate the relationship between the mandibular third molar and the mandibular canal by cone-beam computed tomography. Study design This was a cross-sectional study with convenience sampling. 94 mandibular CBCTs performed with CSANEX 3D machine (Soredex, Finland) and 3D system chosen. Vertical and horizontal relationship between the mandibular canal and the third molar depicted by 3D, panoramic reformat view of CBCT and cross-sectional view. Cross-sectional view was our gold standard and other view evaluated by it. Results There were significant differences between the vertical and horizontal relation of nerve and tooth in all views (p < 0.001). Conclusion The results showed differences in the position of the inferior alveolar nerve with different views of CBCT, so CBCT images are not quite reliable and have possibility of error. How to cite this article Mehdizadeh M, Ahmadi N, Jamshidi M. Evaluation of the Relationship between Mandibular Third Molar and Mandibular Canal by Different Algorithms of Cone-beam Computed Tomography. J Contemp Dent Pract 2014;15(6):740-745.

Sign in / Sign up

Export Citation Format

Share Document