Sulfanilic Acid

Keyword(s):  
1990 ◽  
Vol 29 (9) ◽  
pp. 1761-1765 ◽  
Author(s):  
John R. Bourne ◽  
Oemer M. Kut ◽  
Joachim Lenzner ◽  
Horst Maire

2020 ◽  
Vol 115 (4) ◽  
pp. 132-139
Author(s):  
Muhammad Naveed Ashraf ◽  
Shahzad Maqsood Khan ◽  
Shahid Munir ◽  
Rashid Saleem

Formaldehyde has many applications in the chemical industry including synthesis of amino resins which are used in leather processing. After application in leather, these resins are hydrolyzed under certain conditions to release free formaldehyde which has high environmental concerns due to its proven carcinogenic effects. The objective of this work is to develop a formaldehyde free melamine-based resin to produce green leather with improved retanning properties and thermal stability. The optimum melamine resin was synthesized by condensing melamine with glyoxal instead of formaldehyde. Further, the water solubility and improved thermal stability of synthesized melamine resins were achieved by introduction of sulfanilic acid in resin structure. Synthesized resin was used in leather retanning in comparison with commercially available melamine resin as a control. Both leathers were tested for mechanical properties, organoleptic properties, grain surface and fiber structure analysis. Comparative free formaldehyde content was measured in resultant leathers. Effluents of retanning baths were comparatively analyzed. Optimum resin was also characterized by thermo gravimetric analysis and FTIR. The results of this study showed that the experimental resin has imparted significant improvement in mechanical and organoleptic properties of leather as compared to the control resin. Analysis of free formaldehyde content confirmed the absence of free formaldehyde in leather treated with optimum resin while 141 mg/kg formaldehyde was detected in leather treated with control resin. Free formaldehyde was also absent in effluent of experimental resin while 305 mg/kg formaldehyde was detected in effluent of control resin. Moreover, percentage efficiency in COD, TDS and TSS load of effluent was observed as 9.62, 7.2 and 6.31 respectively.  Resultant leather was free from formaldehyde making it safe for human along with reduction in pollution load of tannery.  


2018 ◽  
Vol 15 (7) ◽  
pp. 403 ◽  
Author(s):  
Chanida Puangpila ◽  
Jaroon Jakmunee ◽  
Somkid Pencharee ◽  
Wipada Pensrisirikul

Environmental contextA widespread pollutant in groundwater, rivers and lakes is nitrite, which is commonly determined batchwise by using colourimetry. The batchwise method, however, requires relatively large and expensive instrumentation, and hence is unsuitable for in-field measurements. This work introduces a simple and portable colourimetric analyser based on a mobile-phone camera for monitoring nitrite concentrations in environmental water samples. AbstractA cost-effective and portable colourimetric analyser installed on a mobile phone was used to measure nitrite in water samples in Chiang Mai City, Thailand. The colourimetric detection was based on the Griess reaction, in which nitrite ion reacts with sulfanilic acid under acidic conditions to produce a diazonium salt that further reacts with N-(1-naphthyl)-ethylenediamine dihydrochloride to form a red–violet azo dye. Under controlled conditions using a light-tight box with LED flash lights, images of the red–violet solution were captured using a built-in camera and further analysed by a program, Panalysis, on the mobile phone. The calibration graph was created by measuring the red colour intensity of a series of standard nitrite solutions from 0.09–1.8 mg N L−1. The calibration equation was then automatically stored for nitrite analysis. The results demonstrated good performance of the mobile phone analyser as an analytical instrument. The accuracy (RE <4%) and precision (RSD ≤ 1%, intra- and inter-day) were also obtained with a detection limit of 0.03 mg N L−1 and a sample throughput of 40 samples per hour. Our results establish this simple, inexpensive and portable device as a reliable in-field monitor of nitrite in environmental waters.


HortScience ◽  
1994 ◽  
Vol 29 (5) ◽  
pp. 578e-578
Author(s):  
J.S. Parham ◽  
J.L. Smilanick

Pseudomonas cepacia LT412W reduced green mold on lemons caused by Penicillium digitatum. It produces phenylpyrrole antibiotics which cause inhibition zones in co-culture with the pathogen. Their role in control of the disease was investigated. Mutagenesis of P. cepacia (rifampicin resistant) was performed by mating it with E. coli S-17 pSUP1021 (kanamycin resistant), which carries the transposon Tn5. Transconjugate selection and screening for absence of inhibition zones identified a stable mutant. Growth of parent and mutant were comparable. When the mutant was co-cultured with the pathogen on lemon albedo agar, no inhibition zone appeared. Similar co-culture on potato dextrose agar with tryptophan (0.05 g/L), a precursor of phenylpyrroles, did not induce inhibition zones. This suggests the mutation is not in tryptophan biosynthesis. Parent and mutant were assayed for phenylpyrroles. They were cultured in nutrient broth, centrifuged, and the cells extracted with acetone. The extract was dried and dissolved in chloroform. It was spotted on nano-SIL Cl8 TLC plates, run one hour (methanol:acetonitrile:water, 1:1:1), dried, developed with sulfanilic acid, and observed under UV light. The relative mobility of spots from extracts of the parent matched phenylpyrroles, whereas the mutant produced none. Control of decay by the mutant and parent were equal, suggesting no role for phenylpyrroles in suppression of the disease.


Author(s):  
Mohammad Anwar Hossain ◽  
Md. Ekramul Islam ◽  
Ashik Mosaddik ◽  
Md. Saiful Islam ◽  
Md. Nazmul Huda ◽  
...  

Background: Neonatal hyperbilirubinemia is a condition when a newborn has an excessive amount of bilirubin in the blood and is one of the most prevalent problems in   neonates. Many studies reported that copper and magnesium play an important role in the pathogenesis and development of neonatal hyperbilirubinemia. Objectives: The aim of this study is to find out the correlation between the level of magnesium and copper with hyperbilirubinemia. Methodology: Serum bilirubin was assayed with colorimetric method by the use of diazotized sulfanilic acid reaction. A photometric automated method was used to determine the levels of magnesium and copper in the serum of neonates in both controls group (162) and cases group (220). Results: In the present study a significantly higher levels of Mg was found in hyperbilirubinemia of newborn infants when compared with control groups (23.67 ±2.33 mg/L versus 19.74 ±2.18 mg/L respectively and p value <0.001 which was significant) and correlation between hyperbilirubinemia and magnesium also significant (p value <0.001). Copper levels was significantly higher in hyperbilirubinemia of newborn infants (0.74 ±0.08 mg/L) compared with control groups (0.41 ±0.12 mg/L), where p value was <0.001, which was significant and correlation between hyperbilirubinemia and copper also significant (p value <0.001). Conclusion: It can be concluded that current study showed the concentrations of magnesium and copper levels were found to be significantly greater than control groups and may have a correlation with neonatal jaundice.


2018 ◽  
Vol 42 (14) ◽  
pp. 12126-12133 ◽  
Author(s):  
Ning Li ◽  
Weidan Na ◽  
Hua Liu ◽  
Xingguang Su

Visual and fluorescence detection of amifostine based on the inner filter effect of gold nanoparticles on sulfanilic acid functionalized graphene quantum dots.


Sign in / Sign up

Export Citation Format

Share Document