scholarly journals Benchmark analysis for recycled glass in Austrian Waste Management

Detritus ◽  
2020 ◽  
pp. 87-98
Author(s):  
Karl Friedrich ◽  
Stephan Holzschuster ◽  
Theresa Fritz ◽  
Roland Pomberger ◽  
Alexia Aldrian
Keyword(s):  
Practical Experience ◽  
Quality Parameters ◽  
Pricing Policy ◽  
Benchmark Analysis ◽  
Recycled Glass ◽  
Glass Processing ◽  
Production Capacities ◽  
Glass Recycling ◽  
Degree Of Degradation

The amendment of the Waste Framework Directive of the European Commission has set a new target for the use of recyclates. It is one of the most significant findings of this strategy that recyclates are currently too infrequently integrated into new products. Glass recycling, however, is widely accepted by the society. The chemical and physical properties of glass enable an almost 100% rate of recycling. Furthermore, the society is experienced in separating glass by colour, resulting in high-quality recycling glass for the production of new glass. Cullets are significant here. Evidently, the price of recyclates is linked to the price of primary material. Practical experience has shown, however, that pricing also correlates with different quality parameters such as degree of mixing, degree of degradation and presence of impurities. This paper examines the correlation between different quality features and how they affect the price of cullets. Experts from the Austrian processing and recycling business were interviewed about the important parameters of their quality inspection and how they affect the pricing policy. Additionally, quality parameters for input and output material are included. Besides the interviews, specific questions on correlations between the price and quality of cullets were e-mailed to several stakeholders in the glass industry. Experts from the glass processing industry did not confirm a correlation between price and quality, however: higher quality does not necessarily mean higher prices. Glassworks are ready to pay higher prices for higher qualities in order to meet their sustainability objectives or to expand their production capacities.

Quality of ram spermatozoa separated with modified swim up method

2018 ◽  
Vol 33 (2) ◽  
pp. 62-70 ◽  
Author(s):  
A Hossain ◽  
MM Islam ◽  
F Naznin ◽  
RN Ferdousi ◽  
FY Bari ◽  
...  
Keyword(s):  
Semen Quality ◽  
Membrane Integrity ◽  
Quality Parameters ◽  
Fluid Medium ◽  
Normal Morphology ◽  
The Mean ◽  
Mass Activity ◽  
Fresh Semen ◽  
Artificial Vagina

Semen was collected from four rams, using artificial vagina and viability%, motility% and plasma membrane integrity% were measured. Fresh ejaculates (n = 32) were separated by modified swim-up separation using modified human tubal fluid medium. Four fractions of supernatant were collected at 15-minute intervals. The mean volume, mass activity, concentration, motility%, viability%, normal morphology and membrane integrity% (HOST +ve) of fresh semen were 1.0 ± 0.14, 4.1 ± 0.1 × 109 spermatozoa/ml, 85.0 ± 1.3, 89.4 ± 1.0, 85.5 ± 0.7, 84.7 ± 0.5 respectively. There was no significant (P>0.05) difference in fresh semen quality parameters between rams. The motility%, viability% and HOST +ve % of first, second, third and fourth fractions were 53.4 ± 0.5, 68.2 ± 0.3, 74.8 ± 0.3 and 65.5 ± 0.4; 55.5 ± 0.4, 66.2 ± 0.4, 74.5 ± 0.3 and 73.6 ± 0.3 and 66.7 ± 0.5, 66.8 ± 0.5, 65.2 ± 0.4 and 74.7 ± 0.5 respectively. The motility%, viability% and membrane integrity% of separated semen samples differed significantly (P<0.05) between four fractions. The mean motility% and viability% were significantly higher (P<0.05) in third fraction (74.8 ± 0.3%), whereas the mean HOST +ve% was significantly higher (P<0.05) in fourth fraction (74.7 ± 0.5). All quality parameters of separated spermatozoa were significantly (P<0.05) lower than that of fresh semen. The pregnancy rates were higher with fresh semen (71%) in comparison to that of separated sample (57%).Bangl. vet. 2016. Vol. 33, No. 2, 62-70

Concept Of Increasing The Level Of Projects Of Work Production

2020 ◽  
pp. 59-63
Keyword(s):  
Practical Experience ◽  
Production Plan ◽  
The Real ◽  
Master Plans ◽  
General Contractor ◽  
Work Production ◽  
Construction Organization ◽  
Production Plans

The author analyzes the reasons that objectively reduce the importance and quality of the organizational and technological solutions of work production plans and the content of their main documents. Based on a generalization of practical experience, one of the real ways of increasing the level of work production plans is proposed as a result of the development of "The Unified Rules for Work Production on the Site" as part of the construction organization project, in the form of fundamental requirements, followed by the inclusion of this document in the work production plan as an input document. The structure and content of the Unified Rules are described with the disclosure of the main documents - calendar plans of work, construction master plans, technological schemes of works. The first section of the document contains requirements for the content of tasks for the development of the project of work execution, the order of its approval, and requirements for the quality of solutions. The second section presents principal solutions, methods of work execution and their technological schemes. The organizational and technological solutions adopted in the proposed document are specified and detailed by the General Contractor Construction Organization with due regard for the resource capabilities and the actual conditions of construction or reconstruction.

Yield and Seed quality of barley (Hordeum vulgare L.) as affected by variety, nitrogen level and harvesting time

2014 ◽  
Vol 2 (2) ◽  
pp. 93-100
Author(s):  
Shahnaj Yesmina ◽  
Moushumi Akhtarb ◽  
Belal Hossain
Keyword(s):  
Grain Yield ◽  
Seed Weight ◽  
Seed Quality ◽  
Quality Parameters ◽  
Nitrogen Level ◽  
Yield Attributes ◽  
Harvesting Time ◽  
Nitrogen Levels ◽  
Vigour Index

The experiment was conducted to find out the effect of variety, nitrogen level and harvesting time on yield and seed quality of barley. The treatments used in the experiment consisted of two varieties viz. BARI Barley 4 and BARI Barley 5, three harvesting time viz. 35, 40 and 45 Days after Anthesis (DAA) and nitrogen levels viz. 0, 70, 85 and 100 kg N ha-1 . The experiment was laid out in a spilt- spilt-plot design with three replications assigning the variety to the main plot, harvesting time to the sub-plots and nitrogen level to the sub-sub plots. Variety had significant effects on the all yield attributes except fertile seeds spike-1 . Seed quality parameters viz. normal seeds spike-1 , deformed seeds spike-1 , germination (%) and vigour index were statistically significant. The variety BARI Barley 5 produced higher grain yield and seed quality than BARI Barley 4. Grain yield from BARI Barley 5 and BARI Barley 4 were 4.59 t ha-1 and 4.24 t ha-1 , respectively. Significantly, the highest 1000-seed weight (46.90 g) was produced by BARI Barley 5 than (37.90 g) BARI Barley 4. The result revealed that harvesting time had significant effect on yield and yield attributes and seed quality parameters. Seed yield was highest (4.65 t ha-1 ) when the crop harvested at 40 DAA and it was increased linearly from 35 DAA. Maximum quality seed and 1000-seed weight (43.20 g) was obtained when the crop harvested at 40 DAA. All the yields, yield attributes and seed quality parameters were significantly influenced by nitrogen levels. The highest grain yield (5.14 t ha-1 ) was obtained when BARI Barley 5 variety was fertilized by 100 kg N ha-1 and the lowest (3.14 t ha-1 ) was obtained from control treatments. Normal seeds spike-1 , vigour index, germination (%) were better at 85 kg N ha-1 in variety of BARI Barley 5 than BARI Barley 4. So it can be concluded that BARI Barley 5 showed better result when fertilized with 100 kg N ha-1 and harvested at 40 DAA for getting maximum yield and 85 kg N ha-1 and harvested at 40 DAA for getting better quality seed.

Questionnaire validation for the evaluation of patients satisfaction with chronic generalized periodontitis physiotherapeutic treatment

2019 ◽  
pp. 32-37
Author(s):  
G.B. Lyubomirsky ◽  
T.L. Redinova
Keyword(s):  
Clinical Characteristics ◽  
Quality Parameters ◽  
Questionnaire Validation ◽  
Dental Procedure ◽  
Dental Services ◽  
Patients Satisfaction ◽  
Literary Sources

This article assesses the reliability, constructive validity and reproducibility of a special questionnaire for determining the quality parameters of rendering physiotherapeutic care to patients with chronic generalized periodontitis. The analysis of literary sources showed that there are studies of quality of dental services, however, we have not met with research into the quality and comfort of physiotherapy procedures for periodontal patients. At the same time, the importance of this issue is obvious and requires study and analysis. Without making judgments about the quality of the service, a full-fledged medical dental procedure can not take place. The assortment of physical devices and methods grows annually, their use in the periodontoloical treatment is not always sufficiently justified, the effectiveness is not always confimed therefore it is important to pay attention not only to the marketing efforts directed by the clinics for comfort, but also to analyze the ideas about the quality of the clinical characteristics of physiotherapeutic procedures.

Considerations of the technological quality assessment of sugarbeet

2011 ◽  
pp. 85-89 ◽  
Author(s):  
Giorgio Pezzi
Keyword(s):  
Quality Parameters ◽  
Northern Italy ◽  
Glucose Content ◽  
Long Term Storage ◽  
Interesting Correlation ◽  
Technological Quality ◽  
Thick Juice

No real improvement in the technological quality of beet has been recorded over the last 15 years in Northern Italy. Among the possible explanations for the quality stagnation is that the traditional formulae cannot correctly differentiate between sugarbeet varieties which produce thick juice of very high purity. This seems to be connected with the role of potassium. The use of a standard purification procedure gives reliable and accurate data which is immediately comparable with the factory data. Research projects on medium/long term storage are currently being performed by Co.Pro.B., Italy, in cooperation with Syngenta and Beta. Up to now the results have shown that storage of sugarbeet in autumn time in northern Italy is possible provided that suitable varieties and proper handling of the roots are employed. Results obtained in the storage trials are reported. Correlations have been found between quality parameters (purity, color and lime salts) of the purified juice with the glucose content of the raw juice. An interesting correlation is reported between purified juice purity and raw juice purity.

Environmental Impact Evaluation of Istanbul Wastewater Treatment and Marine Disposal Systems

1992 ◽  
Vol 25 (9) ◽  
pp. 85-92 ◽  
Author(s):  
I. Ozturk ◽  
T. Zambal ◽  
A. Samsunlu ◽  
E. Göknel
Keyword(s):  
Water Quality ◽  
Wastewater Treatment ◽  
Environmental Impact ◽  
Quality Parameters ◽  
Sea Of Marmara ◽  
General Evaluation ◽  
Marine Outfall ◽  
Secondary Stage ◽  
Pre Treatment

Metropolitan Istanbul Wastewater Treatment System contains 14 marine outfalls, seven of which include secondary stage biological treatment processes. The others have only mechanical treatment units including bar screens and grit chambers. Only one mechanical pre-treatment and marine disposal system, Yenikapi plant, has been operated since 1988 among these 14 plants and six of them are ready for construction. In this paper, the environmental impact of Yenikapi pretreatment and marine disposal system on the water quality of the Bosphorus and the Sea of Marmara has been investigated. Long term water quality measurements which were performed in pre-and post-dischange applications have been evaluated. Water quality parameters including pH, DO, BODs, TKN, P and total coliforms were measured at various sampling stations around the discharge points. A general evaluation of marine outfall systems to be constructed in the scope of Istanbul wastewater treatment project, on the water quality of the Sea of Marmara and the Bosphorus has been presented.

First flush effects in an urban catchment area in Aalborg

1998 ◽  
Vol 37 (1) ◽  
pp. 251-257 ◽  
Author(s):  
Torben Larsen ◽  
Kirsten Broch ◽  
Margit Riis Andersen
Keyword(s):  
Water Quality ◽  
Catchment Area ◽  
Quality Parameters ◽  
Average Concentration ◽  
First Flush ◽  
Storm Events ◽  
Urban Catchment ◽  
Discharge Measurements ◽  
Quality Measurements

The paper describes the results of measurements from a 2 year period on a 95 hectare urban catchment in Aalborg, Denmark. The results of the rain/discharge measurements include 160 storm events corresponding to an accumulated rain depth of totally 753 mm. The water quality measurements include 15 events with time series of concentration of SS, COD, BOD, total nitrogen and total phosphorus. The quality parameters showed significant first flush effects. The paper discusses whether either the event average concentration or the accumulated event mass is the most appropriate way to characterize the quality of the outflow.

ANAAC AND HIGHER EDUCATION IN, INDIA

2018 ◽  
Vol 6 (26) ◽  
Author(s):  
Seema Singh
Keyword(s):  
Higher Education ◽  
Quality Assurance ◽  
Manufacturing Industry ◽  
Practical Experience ◽  
Individual Autonomy ◽  
Economic Activities ◽  
Quality Of Higher Education ◽  
National Quality ◽  
Education In India

Quality, as we know so far, was originally developed in the manufacturing industry. In the area of higher education, the adoption of quality control has been superficial and diluted by the exercise of academic . Further, the prevailing culture of universities is often based on individual autonomy, which is zealously guarded. Thus, it is usually difficult to apply the features of quality to higher education considering the fact that quality requires. However, the quality of higher education is very important for its stakeholders. Notably, providers (funding bodies and the community at large), students, staff and employers of graduates are. The most commonly grouped dimensions of quality are product, software and service. In the changing context marked by expansion of higher education and globalization of economic activities, education has become a national concern with an international dimension. To cope with this changing context, countries have been pressurized to ensure and assure quality of higher education at a nationally comparable and internationally acceptable standard. Consequently, many countries initiated “national quality assurance mechanisms” and many more are in the process of evolving a suitable strategy. Most of the quality assurance bodies were established in the nineties and after a few years of practical experience, they are rethinking many issues of quality assurance. At this juncture where countries look for experiences and practices elsewhere, the experience of India has many valuable lessons and this report is an attempt to share those developments..

Effect of Integrated Nutrient Management on Yield and Quality of Garlic cv. Yamuna Safed-3

2020 ◽  
Vol 7 (04) ◽  
Author(s):  
A B Priyanshu ◽  
M K Singh ◽  
Mukesh Kumar ◽  
Vipin Kumar ◽  
Sunil Malik ◽  
...  
Keyword(s):  
Nutrient Management ◽  
Block Design ◽  
Quality Parameters ◽  
Organic Fertilizers ◽  
Research Centre ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
The Impact ◽  
Horticultural Research

An experiment was conducted at Horticultural Research Centre, SVP University of Agriculture and Technology, Meerut (UP) during Rabi season of 2018-19 to assess the impact of different INM doses on yield and quality parameters of garlic. A total of ten treatments consisting of combinations of inorganic fertilizers, organic fertilizers and bio-fertilizers like T1- (Control), T2RDF (100:50:50 kg NPK ha-1), T3-RDF + 20 kg sulphur + FYM 20 ton ha-1, T4- RDF + 20 kg sulphur + VC 4 ton ha-1, T5- 75% RDF + 40 kg sulphur + 5 ton FYM ha-1+ PSB 5 kg ha-1, T6-75% RDF + 40 kg sulphur + 2 ton VC + Azotobacter 5 kg ha-1, T7- 75% RDF + 40 kg sulphur + FYM 3 ton + VC 1 ton+ PSB 5 kg + Azotobacter 5kg ha-1, T8- 50% RDF + 40 kg sulphur + FYM 5 ton + VC2 ton + PSB 5 kg ha-1, T9- 50% RDF + 40 kg sulphur + FYM5 ton + VC 2 ton+ Azotobacter 5 kg ha-1and T10- 50% RDF + 40 kg sulphur + FYM 5 ton + VC2 ton + PSB 5 kg + Azotobacter 5 kg ha-1 were used in Randomized Block Design and replicated thrice. Out of these an application of T7 (75% RDF + 40 kg sulphur + FYM3 ton + VC 1 ton ha-1 + PSB 5 kg + Azotobacter 5 kg ha-1) was found to be significantly superior in term of yield and attributing parameters of garlic.

scholarly journals Changes in quality parameters of vodka filtered through activated charcoal

2012 ◽  
Vol 30 (No. 5) ◽  
pp. 474-482 ◽  
Author(s):  
L. Siříšťová ◽  
Š. Přinosilová ◽  
K. Riddellová ◽  
J. Hajšlová ◽  
K. Melzoch
Keyword(s):  
Production Technology ◽  
Sensory Analysis ◽  
Activated Charcoal ◽  
Quality Parameters ◽  
High Quality ◽  
Flow Rates ◽  
Positive Effect ◽  
Filtration Device

The production technology of high-quality vodka used in Russia involves filtration through activated charcoal. To approach the quality of renowned Russian vodka, one prominent Czech spirit-producing company installed on its production premises a filtration device including a charcoal column, and launched test runs during which different filtration conditions were tested. Samples collected during the test runs were analysed by GC-FID and GC-MS with the aim to compare their composition; sensory analysis was an integral part of the evaluation. The results documented a positive effect of charcoal filtration on the quality of produced vodka, which was not reduced when higher flow rates were applied. &nbsp;

Sign in / Sign up

Export Citation Format

Share Document