Resonance bifurcation during self-oscillations of the rotor blades of a turbocompressor

2012 ◽  
Vol 41 (2) ◽  
pp. 101-106 ◽  
Author(s):  
R. F. Ganiev ◽  
O. B. Balakshin ◽  
B. G. Kukharenko
2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.


2020 ◽  
pp. 1-16
Author(s):  
Cheng Chi ◽  
Anubhav Datta ◽  
Inderjit Chopra ◽  
Renliang Chen

2009 ◽  
Author(s):  
Narayanan M. Komerath ◽  
Vrishank Raghav ◽  
James DiOttavio
Keyword(s):  

2019 ◽  
pp. 31-37
Author(s):  
I. G. Antсev ◽  
A. P. Aleshkin ◽  
V. V. Vladimirov ◽  
E. O. Kudrina ◽  
O. L. Polonchik ◽  
...  

The results of modeling the processes of receiving and processing the signals of remote sensing of the Earth’s surface using helicopter radar and synthesizing the antenna aperture due to its placement on the rotating rotor blades are presented. The mathematical correctness of the application of the developed algorithms for processing probing signals, as well as the uniqueness of the measurements, was confirmed. At the same time, the dimensions of the synthesized aperture due to the rotation of the radiator placed at the end of the propeller blade are equivalent to a circular antenna array with a diameter of tens of meters. The functionality of the remote sensing system based on this radar meets the requirements for ice observation and navigation systems for seagoing ships off the coast. The simulation results confirm the promise of further research in this direction and can be used in the development of radar systems with synthesized antenna aperture mounted on rotating rotor blades.


Aerospace ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 96
Author(s):  
Abdallah Samad ◽  
Eric Villeneuve ◽  
Caroline Blackburn ◽  
François Morency ◽  
Christophe Volat

Successful icing/de-icing simulations for rotorcraft require a good prediction of the convective heat transfer on the blade’s surface. Rotorcraft icing is an unwanted phenomenon that is known to cause flight cancelations, loss of rotor performance and severe vibrations that may have disastrous and deadly consequences. Following a series of experiments carried out at the Anti-icing Materials International Laboratory (AMIL), this paper provides heat transfer measurements on heated rotor blades, under both the anti-icing and de-icing modes in terms of the Nusselt Number (Nu). The objective is to develop correlations for the Nu in the presence of (1) an ice layer on the blades (NuIce) and (2) liquid water content (LWC) in the freestream with no ice (NuWet). For the sake of comparison, the NuWet and the NuIce are compared to heat transfer values in dry runs (NuDry). Measurements are reported on the nose of the blade-leading edge, for three rotor speeds (Ω) = 500, 900 and 1000 RPM; a pitch angle (θ) = 6°; and three different radial positions (r/R), r/R = 0.6, 0.75 and 0.95. The de-icing tests are performed twice, once for a glaze ice accretion and another time for rime ice. Results indicate that the NuDry and the NuWet directly increased with V∝, r/R or Ω, mainly due to an increase in the Reynolds number (Re). Measurements indicate that the NuWet to NuDry ratio was always larger than 1 as a direct result of the water spray addition. NuIce behavior was different and was largely affected by the ice thickness (tice) on the blade. However, the ice acted as insulation on the blade surface and the NuIce to NuDry ratio was always less than 1, thus minimizing the effect of convection. Four correlations are then proposed for the NuDry, the NuWet and the NuIce, with an average error between 3.61% and 12.41%. The NuDry correlation satisfies what is expected from heat transfer near the leading edge of an airfoil, where the NuDry correlates well with Re0.52.


Sign in / Sign up

Export Citation Format

Share Document