Morphological Study of Platelet Adhesion Dynamics Under Whole Blood Flow Conditions

Platelets ◽  
1992 ◽  
Vol 3 (3) ◽  
pp. 145-153 ◽  
Author(s):  
C. J. Jen ◽  
Y. W. Tai
1987 ◽  
Author(s):  
M R Buchanan ◽  
E Bastida ◽  
J Aznar-Salatti ◽  
P de Groot

It is generally thought that the extracellular matrix (ECM) is thrombogenic.However,one of us (MRB) has reported that the ECM is thromboresistant,and postulated that this was due to the release of endothelial cell (EC) 13-hydroxyoctadecadienoic acid (13-HODE) into the ECM. To test this possibility, we measured platelet adhesion (PLT ADH) onto cultured ECs and their ECMs exposed by 3 methods. We also extracted the ECMs for HPLC analysis of 13-HODE.PLT ADH was expressed as i)adhesion of 3H-adenine labelled platelets/mm2 of ECs or ECMs under static conditions, and ii) % surface^ area coverage measured morphometrically following 5"perfusion with citrated whole blood at 1300 sec-1 in the flat chamber.ECMs were prepared by removing the EC monolayers by freeze thawing , cellulose acetate stripping or NH4OH treatment. PLT ADH to ECs under static and flow conditions were 4700±240/mm2 and 0.1%, respectively, and were associated with 12,6± 1 pg of 13-HODE/mm2 of EC surface (M+SEM). Removal of the ECs by freeze thawing or stripping, resulted in a 18% and 25% increase in PLT ADH to the ECM,under static and flow conditions respectively, and a 80% decrease in ECM associated 13-HODE level. Removal of the EC by NH4OH resulted in a 380% and 770% increase in PLT ADH to the ECM in static and flow conditions. 13-HODE was undetectable.These data support the hypothesis that 13-HODE released from ECs influences the ECM thrombogenecity, and indicate that the residual amounts of components present in the ECMs following EC removal is influenced by the method of ECM preparation.


ASAIO Journal ◽  
1977 ◽  
Vol 23 (1) ◽  
pp. 141-149 ◽  
Author(s):  
E. F. Grabowski ◽  
P. Didisheim ◽  
J. C. Lewis ◽  
J. T. Franta ◽  
J. Q. Stropp

Blood ◽  
2019 ◽  
Vol 134 (Supplement_1) ◽  
pp. 986-986
Author(s):  
Alison Leigh Banka ◽  
Mark Shamoun ◽  
Mario Gutierrez ◽  
Tyler Tanski ◽  
Lola Eniola-Adefeso

Introduction: Sickle cell disease (SCD) occurs due to a mutation in the β-subunit of hemoglobin, causing stiffening of red blood cells (RBCs) and leading to RBC sickling and vaso-occlusive crises (VOC) in SCD patients. While sickled RBCs remain a hallmark of SCD, they are prone to lysis and represent a small fraction of the total RBCs present in patients at a given time. The remaining RBCs maintain a normal, discoid shape and are either healthy or stiff due to polymerization of the hemoglobin β-globin subunit. In healthy blood flow, RBCs form a core in the center of the vessel and the remaining cells, platelets and white blood cells (WBCs), marginate towards the endothelium. However, the increased stiffness of RBCs in SCD disrupts this neat segregation of blood cells to different areas of the blood vessel and can contribute to VOC, the root cause of many acute and chronic complications for SCD patients. Despite the presence of normally shaped, stiffened RBCs in SCD patients, the impact of these RBCs on other cell types in blood flow is currently not well understood. Our laboratory previously demonstrated that the presence of artificially rigidified RBCs leads to an expansion of the RBC core and significantly decreases WBC adhesion to an inflamed endothelium in vitro. Here, we examine the impact of stiffened RBCs on platelet adhesion to a damaged endothelium in vitro by first using a model system with artificially rigidified RBCs and second, utilizing SCD patient blood to further support our model and understand platelet-RBC interactions in SCD patients. Methods: In our model system, we artificially rigidified RBCs taken from healthy donors and reconstituted them into whole blood before perfusing the mixture over an activated, damaged endothelium using a parallel plate flow chamber. We quantified platelet adhesion to the endothelium in comparison to healthy, non-rigidified controls using fluorescent microscopy. To determine if our model findings translated to SCD, we recruited a cohort of hemoglobin SS and SC patients during routine visits and similarly perfused their whole blood over the same damaged endothelium and quantified platelet adhesion. Results and conclusions: The inclusion of artificially rigidified RBCs in otherwise healthy subject blood flow significantly increased platelet adhesion to a damaged endothelium with a maximum increase in platelet adhesion of six-fold over a healthy, non-rigid control in our model system. Both RBC rigidity and the percentage of RBCs that were artificially rigidified had a large impact on the increase in platelet adhesion. SCD platelet adhesion to the damaged endothelium model varied from donor to donor based on variables such as treatment method and disease severity. Overall, this work experimentally elucidates the biophysical impact of stiffened RBCs on platelet adhesion using both an artificial model utilizing healthy blood as well as SCD blood, which can help determine the mechanism of action causing VOC in SCD. Disclosures No relevant conflicts of interest to declare.


Blood ◽  
2008 ◽  
Vol 111 (3) ◽  
pp. 1295-1298 ◽  
Author(s):  
Yasuaki Shida ◽  
Kenji Nishio ◽  
Mitsuhiko Sugimoto ◽  
Tomohiro Mizuno ◽  
Masaaki Hamada ◽  
...  

Abstract The metalloprotease ADAMTS13 is assumed to regulate the functional levels of von Willebrand factor (VWF) appropriate for normal hemostasis in vivo by reducing VWF multimer size, which directly represents the thrombogenic activity of this factor. Using an in vitro perfusion chamber system, we studied the mechanisms of ADAMTS13 action during platelet thrombus formation on a collagen surface under whole blood flow conditions. Inhibition studies with a function-blocking anti-ADAMTS13 antibody, combined with immunostaining of thrombi with an anti-VWF monoclonal antibody that specifically reflects the VWF-cleaving activity of ADAMTS13, provided visual evidence for a shear rate–dependent action of ADAMTS13 that limits thrombus growth directly at the site of the ongoing thrombus generation process. Our results identify an exquisitely specific regulatory mechanism that prevents arterial occlusion under high shear rate conditions during mural thrombogenesis.


Blood ◽  
2010 ◽  
Vol 116 (21) ◽  
pp. 2199-2199
Author(s):  
Masaaki Doi ◽  
Mitsuhiko Sugimoto ◽  
Hideto Matsui ◽  
Tomoko Matsumoto ◽  
Midori Shima

Abstract Abstract 2199 Coagulation factor VIII (FVIII), lacking in hemophilic blood, plays an essential role in mechanisms of fibrin plug formation to arrest bleeding at sites of injured vessel walls. Physiologic activity of FVIII circulating in bloodstream (soluble FVIII; S-FVIII) could be extensively evaluated so far by classic plasma coagulation assays such as activated partial thromboplastin time. However, the in vivo functional relevance of FVIII bound to von Willebrand factor (VWF) which is immobilized in subendothelium (immobilized FVIII; I-FVIII) is more complex and remains to be addressed. Using an in vitro perfusion chamber system, we have therefore evaluated the function of I-FVIII in the process of mural thrombus generation under whole blood flow conditions. FVIII-free VWF was purified in the presence of 0.35 M CaCl2 from cryoprecipitate, and coated on a glass plate. Various concentrations (0 as a control, 0.1, 0.3, 1, or 3 U/ml) of recombinant FVIII (Kogenate FS provided by Bayer Pharmaceutical Co.) were reacted with the FVIII-free VWF-coated glass plate. After non-adherent proteins were washed out, the amount of FVIII immobilized to a glass surface via VWF (I-FVIII) was measured by ELISA-based assay using a peroxidase-conjugated anti-FVIII polyclonal antibody. Whole blood was then perfused over a glass plate described above in a parallel plate flow chamber with various shear rates, and the thrombus generation process on a glass surface was observed in real time by confocal laser scanning microscopy. The development of intra-thrombus fibrin deposition was assessed by immune-staining of thrombi with a fluorescence-labeled anti-fibrin specific monoclonal antibody (NYB-T2G1; Accurate Chem.), reflecting solid-phase blood coagulation reaction during mural thrombogenesis. In perfusion of control blood with a high shear rate (1500 s-1), the intra-thrombus fibrin deposition was found to increase as a function of I-FVIII, resulting in the 2.5-fold greater fibrin deposition at the plateau as compared to control thrombi generated in the absence of I-FVIII. This I-FVIII effect on intra-thrombus fibrin deposition was also confirmed in perfusion of synthetic hemophilic blood (S-FVIII activity < 1%) which was prepared by the incubation of control blood with an anti-FVIII human IgG (final inhibitor titer in synthetic blood; 5, 10, or 20 Bethesda U/ml). Indeed, I-FVIII normalized in a dose-dependent manner the reduced fibrin deposition (20-35% of normal control) within synthetic hemophilic thrombi generated in the absence of S-FVIII under a high shear rate condition. The improvement of impaired fibrin deposition by I-FVIII was unvarying regardless of the anti-FVIII inhibitor titer in synthetic hemophilic blood. In contrast, the direct addition of recombinant FVIII into synthetic hemophilic blood was poorly effective in this regard, due to the immediate neutralization of S-FVIII by an inhibitor involved in synthetic blood. Thus, these results clearly indicate that I-FVIII, independent of S-FVIII, does play a considerable role on the intra-thrombus fibrin-network formation in the process of mural thrombus generation under whole blood flow conditions with high shear rate, most relevant physiologically for the in vivo hemostasis and thrombosis. Our results might imply a possibility of novel strategic design targeting I-FVIII against hemophilic patients with a high titer anti-FVIII inhibitor. Disclosures: No relevant conflicts of interest to declare.


2021 ◽  
Author(s):  
Noriko Tamura ◽  
Kazuya Shimizu ◽  
Seiji Shiozaki ◽  
Kazuyasu Sugiyama ◽  
Masamitsu Nakayama ◽  
...  

Abstract Aim: Functional roles of erythrocytes on platelet adhesion to vessel wall under blood flow condition is still to be elucidated. Methods: Blood specimens containing native, biochemically fixed, or artificial erythrocytes, at various hematocrits were perfused on immobilized von Willebrand factor (VWF) at a shear rate of 1,500 s− 1. Number of platelets adhered on VWF within the region of interest (ROI: 5x103 µm2) was serially measured for 2 minutes using the fluorescent microscopy system. Regression analyses were conducted to evaluate the relationship between the rates of platelet adhesion and the hematocrit values. Computer simulation of platelet adhesion on the wall of von Willebrand factor (VWF) at a shear rate of 1,500 s− 1 was conducted by solving governing equations with a finite-difference method on K-computer. Calculations were conducted at various hematocrits conditions in the computational domain of 100 µm (x-axis) x 400 µm (y-axis) x 100 µm (z-axis). Results: Biological experiments demonstrated the positive correlations between the rates of platelet adhesion and hematocrit values in native, fixed, and artificial erythrocytes. (r = 0.992, 0.934, and 0.825, p < 0.05 for all) The number of platelets adhered after 2 minutes blood perfusion at 24% hematocrit of 221.7 ± 22.6/5x103 µm2 (fixed erythrocytes) and 208.0 ± 26.5/5x103 µm2(artificial ones), respectively, were comparable to that with native ones of 195.9 ± 28.3/5x103 µm2. The simulation results demonstrated the hematocrit dependent increase in platelet adhesion rates (94.3/sec at 10%, 185.2/sec at 20%, and 327.9/sec at 30%, respectively) suggesting the importance of augmented z-axis fluctuation of flowing platelet by erythrocytes as the cause of platelet adhesion. Conclusions: Our experimental results indicate the importance of the physical roles of erythrocytes inducing wall-normal fluctuations of flowing platelets on their vessel adhesion under blood flow conditions.


Author(s):  
Zufar A. Gabbasov ◽  
Yuliya N. Avtaeva ◽  
Ivan S. Melnikov ◽  
Sergey D. Okhota ◽  
Martin Caprnda ◽  
...  

2003 ◽  
Vol 1 ◽  
pp. P0762-P0762
Author(s):  
T. Mizuno ◽  
M. Sugimoto ◽  
H. Matsui ◽  
M. Hamada ◽  
S. Miyata ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document