scholarly journals Fuzzy Logic Based Controller for Buck Converter

2018 ◽  
Author(s):  
Asnil ◽  
Habibullah ◽  
Irma Husnaini
Keyword(s):  
Fuzzy Logic ◽  
Solar Cell ◽  
Output Voltage ◽  
Fuzzy Logic Controller ◽  
Pulse Generation ◽  
Buck Converter ◽  
Dc Voltage ◽  
Generation Technique ◽  
Fuzzy Logic Method ◽  
The Stability

This research aims to make buck converter prototype for PLTS system by using fuzzy logic controller. Buck converter is required in the PLTS system if the required unidirectional voltage is smaller than the output voltage of the solar cell. Buck converter used to convert 24 Volt dc voltage to 12 Volt dc with 60 watt capability. While fuzzy logic controller is used to improve buck converter performance based on pulse generation technique for switching. The application of fuzzy logic method is expected to improve the performance of the system by maintaining the stability of buck converter output voltage of 12 volts and reduce the output ripple value. Atmega8535 microcontroller is used to generate PWM pulses for switching on power circuits.

scholarly journals Fuzzy Logic Based Controller For Buck Converter

2019 ◽  
Vol 1 (3) ◽  
pp. 1-12
Author(s):  
Habibullah Salim ◽  
Irma Husnaini ◽  
Asnil Asnil
Keyword(s):  
Fuzzy Logic ◽  
Solar Cell ◽  
Output Voltage ◽  
Fuzzy Logic Controller ◽  
Pulse Generation ◽  
Buck Converter ◽  
Dc Voltage ◽  
Generation Technique ◽  
Fuzzy Logic Method ◽  
The Stability

This research aims to make buck converter prototype for PLTS system by using fuzzy logic controller. Buck converter is required in the PLTS system if the required unidirectional voltage is smaller than the output voltage of the solar cell. Buck converter used to convert 24 Volt dc voltage to 12 Volt dc with 60 watt capability. While fuzzy logic controller is used to improve buck converter performance based on pulse generation technique for switching. The application of fuzzy logic method is expected to improve the performance of the system by maintaining the stability of buck converter output voltage of 12 volts and reduce the output ripple value. Atmega8535 microcontroller is used to generate PWM pulses for switching on power circuits. The results obtained from the test using a 100 Ohm 5 Watt load obtained the buck converter output voltage of 12.4 Volt.

scholarly journals Implementation of Fuzzy Logic Controller for DC–DC step Down Converter

2021 ◽  
Vol 10 (8) ◽  
pp. 109-112
Author(s):  
Shaik Gousia Begum ◽  
Syed Sarfaraz Nawaz ◽  
G. Sai Anjaneyulu
Keyword(s):  
Fuzzy Logic ◽  
Output Voltage ◽  
Fuzzy Logic Controller ◽  
Supply Voltage ◽  
Buck Converter ◽  
Buck Converters ◽  
Major Drawback ◽  
Dc Voltage ◽  
Overall Efficiency ◽  
Step Down

This paper presents the design of a Fuzzy logic controller for a DC-DC step-down converter. Buck converters are step-down regulated converters which convert the DC voltage into a lower level standardized DC voltage. The buck converters are used in solar chargers, battery chargers, quadcopters, industrial and traction motor controllers in automobile industries etc. The major drawback in buck converter is that when input voltage and load change, the output voltage also changes which reduces the overall efficiency of the Buck converter. So here we are using a fuzzy logic controller which responds quickly for perturbations, compared to a linear controllers like P, PI, PID controllers. The Fuzzy logic controllers have become popular in designing control application like washing machine, transmission control, because of their simplicity, low cost and adaptability to complex systems without mathematical modeling So we are implementing a fuzzy logic controller for buck converter which maintains fixed output voltage even when there are fluctuations in supply voltage and load. The fuzzy logic controller for the DC-DC Buck converter is simulated using MATLAB/SIMULINK. The proposed approach is implemented on DC-DC step down converter for an input of 230V and we get the desired output for variations in load or references. This proposed system increases the overall efficiency of the buck converter.

STABILISASI TEGANGAN KELUARAN BUCK CONVERTER DENGAN METODE FUZZY LOGIC CONTROLLER

JURNAL ELTEK ◽  
2018 ◽  
Vol 16 (2) ◽  
pp. 125
Author(s):  
Oktriza Melfazen
Keyword(s):  
Fuzzy Logic ◽  
Steady State ◽  
Rise Time ◽  
Fuzzy Logic Controller ◽  
Buck Converter ◽  
Settling Time

Buck converter idealnya mempunyai keluaran yang stabil, pemanfaatandaya rendah, mudah untuk diatur, antarmuka yang mudah dengan pirantiyang lain, ketahanan yang lebih tinggi terhadap perubahan kondisi alam.Beberapa teknik dikembangkan untuk memenuhi parameter buckconverter. Solusi paling logis untuk digunakan pada sistem ini adalahmetode kontrol digital.Penelitian ini menelaah uji performansi terhadap stabilitas tegangankeluaran buck converter yang dikontrol dengan Logika Fuzzy metodeMamdani. Rangkaian sistem terdiri dari sumber tegangan DC variable,sensor tegangan dan Buck Converter dengan beban resistif sebagaimasukan, mikrokontroler ATMega 8535 sebagai subsistem kontroldengan metode logika fuzzy dan LCD sebagai penampil keluaran.Dengan fungsi keanggotaan error, delta error dan keanggotaan keluaranmasing-masing sebanyak 5 bagian serta metode defuzzifikasi center ofgrafity (COG), didapat hasil rerata error 0,29% pada variable masukan18V–20V dan setpoint keluaran 15V, rise time (tr) = 0,14s ; settling time(ts) = 3,4s ; maximum over shoot (%OS) = 2,6 dan error steady state(ess) = 0,3.

scholarly journals An intelligent lead-acid battery closed-loop charger using a combined fuzzy controller for PV applications

2021 ◽  
Vol 297 ◽  
pp. 01033
Author(s):  
Iliass Rkik ◽  
Mohamed El khayat ◽  
Hafsa Hamidane ◽  
Abdelali Ed-Dahhak ◽  
Mohammed Guerbaoui ◽  
...  
Keyword(s):  
Fuzzy Logic ◽  
Fuzzy Logic Controller ◽  
Fuzzy Controller ◽  
Control Unit ◽  
Buck Converter ◽  
Lead Acid Battery ◽  
Charging System ◽  
Pv Array ◽  
Full Power ◽  
Lead Acid

This paper presents the modeling of an intelligent combined MPPT and Lead-Acid battery charger controller for standalone solar photovoltaic systems. It involves the control of a DC/DC buck converter through a control unit, which contains two cascaded fuzzy logic controllers (FLC), that adjusts the required duty cycle of the converter according to the state of charge and the three stage lead acid battery charging system. The first fuzzy logic controller (FLC1) consists of an MPPT controller to extract the maximum power produced by the PV array, while the second fuzzy controller (FLC2) is aimed to control the voltage across the battery to ensure the three stage charging approach. This solution of employing two distinct cascaded fuzzy controllers surmounts the drawbacks of the classical chargers in which the voltage provided to the lead acid battery is not constant owing to the effects of the MPPT control which can automatically damage the battery. Thus, the suggested control strategy has the benefit of extracting the full power against the PV array, avoiding battery damage incurred by variable MPPT voltage and increasing the battery’s lifespan.

scholarly journals Center of Pressure Feedback for Controlling the Walking Stability Bipedal Robots using Fuzzy Logic Controller

2018 ◽  
Vol 8 (5) ◽  
pp. 3678
Author(s):  
Afrizal Mayub ◽  
Fahmizal Fahmizal
Keyword(s):  
Fuzzy Logic ◽  
Degrees Of Freedom ◽  
Fuzzy Logic Controller ◽  
Center Of Pressure ◽  
Bipedal Robots ◽  
Bipedal Robot ◽  
Position Information ◽  
Pressure Feedback ◽  
The Stability ◽  
Foot Pad

This paper presents a sensor-based stability walk for bipedal robots by using force sensitive resistor (FSR) sensor. To perform walk stability on uneven terrain conditions, FSR sensor is used as feedbacks to evaluate the stability of bipedal robot instead of the center of pressure (CoP). In this work, CoP that was generated from four FSR sensors placed on each foot-pad is used to evaluate the walking stability. The robot CoP position provided an indication of walk stability. The CoP position information was further evaluated with a fuzzy logic controller (FLC) to generate appropriate offset angles to be applied to meet a stable situation. Moreover, in this paper designed a FLC through CoP region's stability and stable compliance control are introduced. Finally, the performances of the proposed methods were verified with 18-degrees of freedom (DOF) kid-size bipedal robot.<br /><br />

scholarly journals MATHEMATICAL ALGORITHM OF FUZZY LOGIC CONTROLLER FOR MULTILEVEL INVERTER CREATING VERTICAL DIVIDED VOLTAGE

2019 ◽  
Vol 59 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Erol Can
Keyword(s):  
Mathematical Model ◽  
Fuzzy Logic ◽  
Fuzzy Logic Control ◽  
Pid Controller ◽  
Output Voltage ◽  
Fuzzy Logic Controller ◽  
Boost Converter ◽  
Multilevel Inverter ◽  
Logic Control ◽  
Multi Level

A 9-level inverter with a boost converter has been controlled with a fuzzy logic controller and a PID controller for regulating output voltage applications on resistive (R) and inductive (L), capacitance (C). The mathematical model of this system is created according to the fuzzy logic controlling new high multilevel inverter with a boost converter. The DC-DC boost converter and the multi-level inverter are designed and explained, when creating a mathematical model after a linear pulse width modulation (LPWM), it is preferred to operate the boost multi-level inverter. The fuzzy logic control and the PID control are used to manage the LPWM that allows the switches to operate. The fuzzy logic algorithm is presented by giving necessary mathematical equations that have second-degree differential equations for the fuzzy logic controller. After that, the fuzzy logic controller is set up in the 9-level inverter. The proposed model runs on different membership positions of the triangles at the fuzzy logic controller after testing the PID controller. After the output voltage of the converter, the output voltage of the inverter and the output current of the inverter are observed at the MATLAB SIMULINK, the obtained results are analysed and compared. The results show the demanded performance of the inverter and approve the contribution of the fuzzy logic control on multi-level inverter circuits.

scholarly journals Performance enhancement analysis of an isolated DC-DC converter using fuzzy logic controller

2017 ◽  
Vol 7 (1.2) ◽  
pp. 186 ◽  
Author(s):  
S. Muthu Balaji ◽  
R. Anand ◽  
P. Senthil Pandian
Keyword(s):  
Fuzzy Logic ◽  
High Voltage ◽  
Output Voltage ◽  
Fuzzy Logic Controller ◽  
Performance Enhancement ◽  
Supply Voltage ◽  
Boost Converter ◽  
Open Loop ◽  
Voltage Gain ◽  
Power Application

High voltage gain dc-dc converters plays an major role in many modern industrialized applications like PV and fuel cells, electrical vehicles, dc backup systems (UPS, inverter), HID (high intensity discharge) lamps. As usual boost converter experiences a drawback of obtaining a high voltage at maximum duty cycle. Hence in order to increase the voltage gain of boost converter, this paper discusses about the advanced boost converter using solar power application. By using this technique, boost converter attains a high voltage which is ten times greater than the input supply voltage. The output voltage can be further increased to more than ten times the supply voltage by using a parallel capacitor and a coupled inductor. The voltage stress across the switch can be reduced due to high output voltage. The Converter is initially operated in open loop and then it is connected with closed loop. More over the fuzzy logic controller is used for the ripple reduction.

Levitation of the ‘Jumping Ring’ Using a Fuzzy Logic Controller

1997 ◽  
Vol 34 (3) ◽  
pp. 211-222 ◽  
Author(s):  
Noel Barry ◽  
Richard Casey ◽  
Mark Power
Keyword(s):  
Fuzzy Logic ◽  
Electromagnetic Induction ◽  
Output Voltage ◽  
Fuzzy Logic Controller ◽  
Amplitude Level ◽  
Level Analysis

Levitation, using the principle of electromagnetic induction and the consequential force between two circuits, is employed to maintain a ring stationary above a coil. The a.c. output voltage to the coil is switched through a H bridge inverter with a fuzzy logic controller determining the amplitude level. Analysis is included.

Sign in / Sign up

Export Citation Format

Share Document