scholarly journals Quasi - 3D and Full - 3D Approaches for Numerical Simulation in Axial Flow Hydraulic Turbine

2009 ◽  
Vol 4 ◽  
pp. 42-48
Author(s):  
Vishnu Prasad ◽  
K. S. Sayann ◽  
P Krishnamachar
Keyword(s):  
Viscous Flow ◽  
Flow Behavior ◽  
Flow Analysis ◽  
Axial Flow ◽  
Flow Simulation ◽  
Hydraulic Turbine ◽  
Energy And Environment ◽  
Improve Design ◽  
Numerical Flow Simulation ◽  
Experimental Values

Water passes through the rows of stationary and rotating blades in the turbine space and thus the flow becomes complex. The application of computational fluid dynamics (CFD) is steadily increasing to improve design of hydraulic turbines. The numerical flow simulation in the hydraulic turbine space can either be based on potential or viscous flow theory. In both the approaches, detailed flow behavior in complete turbine space is obtained. The quasi- 3D potential flow approach is quick and simple as compared to full-3D viscous flow methods of analysis but do not take into account the friction losses, which need to be computed separately. The direct flow analysis has been carried out in an experimentally tested model of axial flow hydraulic turbine using the two approaches and the comparison of flow pattern and computed parameters in runner is made in present paper. The computed efficiencies and other performance parameters have also been compared with experimental values at some critical points for validation.Hydro Nepal: Journal of Water, Energy and Environment Issue No. 4, January, 2009 Page 42-48

Three-Dimensional Flow Phenomena in a Transonic, High-Through-Flow, Axial-Flow Compressor Stage

1992 ◽  
Author(s):  
William W. Copenhaver ◽  
Chunill Hah ◽  
Steven L. Puterbaugh
Keyword(s):  
Flow Field ◽  
Viscous Flow ◽  
Numerical Technique ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Axial Flow ◽  
Compressor Stage ◽  
Complex Flow ◽  
Pressure Transducers ◽  
Through Flow

A detailed aerodynamic study of a transonic, high-through-flow, single stage compressor is presented. The compressor stage was comprised of a low-aspect-ratio rotor combined alternately with two different stator designs. Both experimental and numerical studies are conducted to understand the details of the complex flow field present in this stage. Aerodynamic measurements using high-frequency, Kulite pressure transducers and conventional probes are compared with results from a three-dimensional viscous flow analysis. A steady multiple blade row approach is used in the numerical technique to examine the detailed flow structure inside the rotor and the stator passages. The comparisons indicate that many flow field features are correctly captured by viscous flow analysis, and therefore unmeasured phenomena can be studied with some level of confidence.

Flow Simulation and Diagnosis Through Hydraulic Turbines Using a RNG k-ω Turbulence Model

2010 ◽  
Author(s):  
Shuhong Liu ◽  
Xiaojing Wu ◽  
Yulin Wu
Keyword(s):  
Turbulence Model ◽  
Large Scale ◽  
Flow Behavior ◽  
Flow Simulation ◽  
Hydraulic Turbine ◽  
Francis Turbine ◽  
Design Stage ◽  
Hydro Power ◽  
Large Power ◽  
Power Stations

Francis turbine is widely employed in large scale hydro-power stations in the world with main characteristics of efficiency, stability and cavitation. In practical establishment, each large power station must develop a new Francis turbine for its special natural condition and requirement, such as higher efficiency for utilization of natural resources. CFD has been developed greatly and helped a lot in hydraulic design stage of the turbine. In this paper, firstly, a new RNG k–ω turbulence model is proposed based on the RNG k–ε model, which brings the nonlinear term of the mean fluid flow transition to the ω equation in the original k–ω model. And, this RNG k–ω model has been used to predict the energy performances for Francis turbine. Then, the flow diagnosis method in the turbine runner based on vorticity parameters is presented, following the detailed flow behavior revealed. Finally, the simulation results for different model Francis turbines have been compared and analyzed for optimizing the energy performances of the turbine. The model test results indicate that the efficiency of hydraulic turbine has been improved from 93.6% to 94.5%.

Performance Prediction by Viscous Flow Analysis for Francis Turbine Runner

1994 ◽  
Vol 116 (1) ◽  
pp. 116-120 ◽  
Author(s):  
T. C. Vu ◽  
W. Shyy
Keyword(s):  
Viscous Flow ◽  
Computational Algorithm ◽  
Flow Behavior ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Francis Turbine ◽  
Turbine Runner ◽  
Current Design ◽  
Low Head ◽  
High Head

Validation of a three-dimensional computational algorithm for viscous flow analysis has been conducted for two types of Francis turbine runner geometry, one low head and one high head, using experimental measurement. Assessment has been made for both qualitative features of flow behavior, as well as quantitative distribution of blade pressure and head loss. The influence of the grid size on the accuracy of the numerical solution is also discussed. Effort has been made to address some of the design issues, and to demonstrate that the present computational algorithm can make useful contributions to help improve the current design practices.

Three-Dimensional Flow Phenomena in a Transonic, High-Throughflow, Axial-Flow Compressor Stage

1993 ◽  
Vol 115 (2) ◽  
pp. 240-248 ◽  
Author(s):  
W. W. Copenhaver ◽  
C. Hah ◽  
S. L. Puterbaugh
Keyword(s):  
Flow Field ◽  
Viscous Flow ◽  
Numerical Technique ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Axial Flow ◽  
Compressor Stage ◽  
Complex Flow ◽  
Pressure Transducers ◽  
Flow Compressor

A detailed aerodynamic study of a transonic, high-throughflow, single-stage compressor is presented. The compressor stage was comprised of a low-aspect-ratio rotor combined alternately with two different stator designs. Both experimental and numerical studies are conducted to understand the details of the complex flow field present in this stage. Aerodynamic measurements using high-frequency, Kulite pressure transducers and conventional probes are compared with results from a three-dimensional viscous flow analysis. A steady multiple blade row approach is used in the numerical technique to examine the detailed flow structure inside the rotor and the stator passages. The comparisons indicate that many flow field features are correctly captured by viscous flow analysis, and therefore unmeasured phenomena can be studied with some level of confidence.

Modeling and Computation of Flow in a Passage With 360-Degree Turning and Multiple Airfoils

1993 ◽  
Vol 115 (1) ◽  
pp. 103-108 ◽  
Author(s):  
W. Shyy ◽  
T. C. Vu
Keyword(s):  
Porous Medium ◽  
Global Analysis ◽  
Flow Behavior ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Hydraulic Turbine ◽  
Complex Flow ◽  
The Individual ◽  
Spiral Casing

The spiral casing of a hydraulic turbine is a complex flow device which contains a passage of 360-degree turning and multiple elements of airfoils (the so-called distributor). A three-dimensional flow analysis has been made to predict the flow behavior inside the casing and distributor. The physical model employs a two-level approach, comprising of (1) a global model that adequately accounts for the geometry of the spiral casing but smears out the details of the distributor, and represents the multiple airfoils by a porous medium treatment, and (2) a local model that performs detailed analysis of flow in the distributor region. The global analysis supplies the inlet flow condition for the individual cascade of distributor airfoils, while the distributor analysis yields the information needed for modeling the characteristics of the porous medium. Comparisons of pressure and velocity profiles between measurement and prediction have been made to assess the validity of the present approach. Flow characteristics in the spiral casing are also discussed.

421 Free Surface Flow Analysis of an Axial Flow Hydraulic Turbine with a Collection Device

2014 ◽  
Vol 2014.24 (0) ◽  
pp. 186-189
Author(s):  
Sou Hirama ◽  
Yasuyuki Nishi ◽  
Terumi Inagaki ◽  
Yanrong Li ◽  
Norio Kikuchi
Keyword(s):  
Free Surface ◽  
Flow Analysis ◽  
Axial Flow ◽  
Free Surface Flow ◽  
Hydraulic Turbine ◽  
Surface Flow ◽  
Collection Device

Unsteady flow analysis of an axial flow hydraulic turbine with collection devices comprising a different number of blades

2015 ◽  
Vol 24 (3) ◽  
pp. 239-245 ◽  
Author(s):  
Yasuyuki Nishi ◽  
Terumi Inagaki ◽  
Yanrong Li ◽  
Sou Hirama ◽  
Norio Kikuchi
Keyword(s):  
Unsteady Flow ◽  
Flow Analysis ◽  
Axial Flow ◽  
Hydraulic Turbine ◽  
Unsteady Flow Analysis

Navier-Stokes Flow Analysis for Hydraulic Turbine Draft Tubes

1990 ◽  
Vol 112 (2) ◽  
pp. 199-204 ◽  
Author(s):  
T. C. Vu ◽  
W. Shyy
Keyword(s):  
Stokes Flow ◽  
Stokes Equations ◽  
Flow Behavior ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Hydraulic Turbine ◽  
Navier Stokes ◽  
Numerical Result ◽  
Wide Range ◽  
Draft Tubes

Three-dimensional turbulent viscous flow analyses for hydraulic turbine elbow draft tubes are performed by solving Reynolds averaged Navier-Stokes equations closed with a two-equation turbulence model. The predicted pressure recovery factor and flow behavior in the draft tube with a wide range of swirling flows at the inlet agree well with experimental data. During the validation of the Navier-Stokes flow analysis, particular attention was paid to the effect of grid size on the accuracy of the numerical result and the importance of accurately specifying the inlet flow condition.

Flow Behavior Around Stayvanes and Guidevanes of a Francis Turbine

1996 ◽  
Vol 118 (1) ◽  
pp. 110-115 ◽  
Author(s):  
Toshiaki Suzuki ◽  
Tomotatsu Nagafuji ◽  
Hiroshi Komiya ◽  
Takako Shimada ◽  
Toshio Kobayashi ◽  
...  
Keyword(s):  
Viscous Flow ◽  
Flow Behavior ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Francis Turbine ◽  
Good Prediction ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Pressure Distributions

The three-dimensional computation of steady and incompressible internal flows is of interest in numerical simulations of turbomachinery, and such simulations are currently under investigation, from inviscid to viscous flow analyses. First, surface pressure distributions have been measured for the stayvanes and the guidevanes of a Francis turbine. They are presented to verify the numerical results. Second, both inviscid and viscous three-dimensional flow analyses have been made, so as to predict the flow behavior in the same domain. Comparison of the measured pressure distributions to the predicted pressure distributions has been made to study the usefulness of the present simulations. It can be pointed out that a global analysis which includes a runner flow passage, except runner blades, is necessary to predict the three-dimensional flow characteristics and that inviscid flow analysis has the capability of good prediction for flow without separation. Viscous flow analysis gives similar results, though it is necessary to investigate further the improvement of prediction accuracy. Flow characteristics around the stayvanes and the guidevanes are also discussed.

316 Unsteady Flow Analysis of an Axial Flow Hydraulic Turbine with a Collection Device

2014 ◽  
Vol 2014.22 (0) ◽  
pp. 231-232
Author(s):  
Sou HIRAMA ◽  
Kaoru OKUBO ◽  
Yasuyuki NISHI ◽  
Terumi INAGAKI ◽  
Yanrong LE ◽  
...  
Keyword(s):  
Unsteady Flow ◽  
Flow Analysis ◽  
Axial Flow ◽  
Hydraulic Turbine ◽  
Collection Device ◽  
Unsteady Flow Analysis
Sign in / Sign up

Export Citation Format

Share Document