scholarly journals Evaluation of Cranial Base Morphology of Pakistani Population in Skeletal Class I, II and III Malocclusions

2019 ◽  
Vol 9 (2) ◽  
pp. 43-46
Author(s):  
Faizan Alia ◽  
Rabia Aziz ◽  
Amna Malik ◽  
Hadiqa Afzal
Keyword(s):  
Pearson Correlation ◽  
Class Ii ◽  
Cranial Base ◽  
Class I ◽  
Base Length ◽  
Class Iii ◽  
Skeletal Class ◽  
Anterior Cranial Base ◽  
Angular Measurements ◽  
Jaw Position

 Introduction: Cranial Base integrate different patterns of growth in various regions of the skull such as the nasal cavity, the oral cavity, and the pharynx. Anteroposterior jaw position is thought to be affected by cranial base growth. Although scientific literature shows conflicting results regarding both positive and negative correlation between the cranial base and skeletal malocclusions. Materials & Method: 138 patients selected according to the Inclusion criteria were divided into three major categories depending upon ANB angle. Class I, class II group and class III group. Pretreatment lateral cephalometric radiographs were taken. Linear and Angular measurements were measured. All the data was entered in SPSS version 25 and then analyzed by using descriptive statistics including mean, standard deviation and by using inferential statistics including Pearson correlation and ANOVA test. Result: No significant differences were recorded between cranial base deflection angles (N-S-Ar and N-S-Ba) and malocclusions groups while Anterior cranial base length S-N was found to be maximum in class III and posterior cranial base length S-Ba was greater in class I. Conclusion: Cranial base angles N-S-Ar and N-S-Ba did not demonstrate any statistically significant correlation with three malocclusion groups i.e. Class I, Class II and Class III and their correlation was negative.

scholarly journals Cranial Base Features in Skeletal Class III Patients

2008 ◽  
Vol 78 (3) ◽  
pp. 433-439 ◽  
Author(s):  
Peter Proff ◽  
Florian Will ◽  
Ivan Bokan ◽  
Jochen Fanghänel ◽  
Tomas Gedrange
Keyword(s):  
Cranial Base ◽  
Class I ◽  
Base Length ◽  
Class Iii ◽  
Skeletal Class ◽  
Anterior Cranial Base ◽  
Condylar Displacement ◽  
Mandibular Protrusion

Abstract Objective: To investigate the cranial base configuration in skeletal Class III patients to clarify the conflicting findings from literature. Materials and Methods: Initial lateral radiographs of 54 skeletal Class III patients and 54 matched controls (Class I, II/1, II/2) aged 14 to 24 years were analyzed retrospectively for 21 cephalometric basicranial variables and jaw lengths relative to anterior cranial base length. Results: In contrast to overall cranial base length, the anterior (N-S) and posterior (S-Ba, S-Ar) sections failed to show a significant reduction in Class III patients. The significantly more acute angles Ca-S-Ba and Se-S-Ba reflected increased cranial base flexure. Resulting anterior condylar displacement was shown by significant reduction of Se-S-Cd and Ar-Ca. Relative mandibular length was significantly increased. Conclusions: Decreased basicranial angulation associated with Class III mandibular protrusion was clearly confirmed for skeletal Class III patients. Overall shortening of the cranial base apparently resulted from various minor alterations. The results are compatible with the deficient orthocephalization hypothesis of Class III morphogenesis. The basicranial-maxillary relationship in skeletal Class III remains unclear.

scholarly journals Cranial base characteristics in anteroposterior malocclusions: A meta-analysis

2015 ◽  
Vol 86 (4) ◽  
pp. 668-680 ◽  
Author(s):  
Aixiu Gong ◽  
Jing Li ◽  
Zhendong Wang ◽  
Yuan Li ◽  
Fang Hu ◽  
...  
Keyword(s):  
Meta Analysis ◽  
Class Ii ◽  
Cranial Base ◽  
Class I ◽  
Cochrane Library ◽  
Base Length ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Base Angle ◽  
Statistical Heterogeneity

ABSTRACT Objective:  To investigate cranial base characteristics in malocclusions with sagittal discrepancies. Materials and Methods:  An electronic search was performed in PubMed, Embase, Web of Science, and the Cochrane Library. A fixed- or random-effect model was applied to calculate weighted mean difference with 95% confidence intervals (CIs) according to statistical heterogeneity. Outcome measures were anterior, posterior, and total cranial base length and cranial base angle. Sensitivity analysis and publication bias were conducted. Results:  Twenty studies that together included 1121 Class I, 1051 Class II, and 730 Class III cases qualified for the final analysis. Class III malocclusion demonstrated significantly reduced anterior (95% CI: −1.74, −0.53; P < .001 vs Class I; 95% CI: −3.30, −2.09; P < .001 vs Class II) and total cranial base length (95% CI: −3.33, −1.36; P < .001 vs Class I; 95% CI: −7.38, −4.05; P < .001 vs Class II). Further, Class II patients showed significantly greater anterior and total cranial base length than did Class I patients (95% CI: 0.51, 1.87; P < .001 for SN; 95% CI: 2.20, 3.30; P < .001 for NBa). Cranial base angle was significantly smaller in Class III than in Class I (95% CI: −3.14, −0.93; P < .001 for NSBa; 95% CI: −2.73, −0.68; P  =  .001 for NSAr) and Class II malocclusions (95% CI: −5.73, −1.06; P  =  .004 for NSBa; 95% CI: −6.11, −1.92; P < .001 for NSAr) and greater in Class II than in Class I malocclusions (95% CI: 1.38, 2.38; P < .001 for NSBa). Conclusions:  This meta-analysis showed that anterior and total cranial base length and cranial base angle were significantly smaller in Class III malocclusion than in Class I and Class II malocclusions, and that they were greater in Class II subjects compared to controls.

scholarly journals Cephalometric Evaluation Of The Size And Morphology Of Sella Turcica In Different Types Of Malocclusion Among Romanian Subjects

2016 ◽  
Vol 12 (21) ◽  
pp. 1
Author(s):  
Irinel Panainte ◽  
Reka Gyergyay ◽  
Krisztina Martha
Keyword(s):  
Sella Turcica ◽  
Cranial Base ◽  
Class I ◽  
Base Length ◽  
Class Iii ◽  
Linear Measurements ◽  
Mean Values ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Different Types

Introduction: The vertical and sagital position of the maxilla and mandible is influenced by the size and the angulation of the cranial base. Sellae turcica is part of the cranial base. It is located in the middle cranial fossa. Thus, the growth and the development of this bony structure are influenced by neural and general skeletal pattern as well. Cephalometric analysis is an important part of orthodontic diagnosis and treatment planning. From numerous cephalometric landmarks, the S- sellae point is commonly used to describe the cranial base. Also, it is used to evaluate other bony structures’ position towards it. Objective: The purpose of this study is to evaluate the shape and the dimension of the sellae turcica in different types of malocclusions. Materials and Methods: 136 randomly selected lateral cephalometric radiographs were analyzed. Also, skeletal and facial pattern was identified and the shape and sagital dimension of the sellae was measured. Results: Statistical analysis presented no significancy regarding sellae’s shape in different types of malocclusion. However, the skeletal class II cases presented the most anarchic sellae shapes. Comparing linear measurements of skeletal length and sellae diameter, we found that the smallest diameter of the sellae appears in class III malocclusions. Thus, other skeletal length presents the lowest mean values also. Statistically significant differences among maxillary, mandibular, and cranial base length and sellae diameter were found in class I malocclusion (p=0.013). Conclusions: Sella morphology appears to have certain correlation with cranial and jaw base length and jaw base relationship in skeletal Class I Romanian population

scholarly journals Anatomical characteristics of mandibular bone in skeletal Class I, II and III patients by using cone beam computed tomography images in an iranian population

2021 ◽  
Vol 24 (2) ◽  
Author(s):  
Mohammad Zandi ◽  
Abbas Shokri ◽  
Vahid Mollabashi ◽  
Zahed Eghdami ◽  
Payam Amini
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Class Iii ◽  
Anatomical Characteristics ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Ramus Height

Objetive: This study aimed to compare the anatomical characteristics of the mandible in patients with skeletal class I, II and class III disorders using cone beam computed tomography (CBCT). Material and Methods: CBCT scans of patients between 17 to 40 years taken with NewTom 3G CBCT system with 12-inch field of view (FOV) were selected from the archive. Lateral cephalograms were obtained from CBCT scans of patients, and type of skeletal malocclusion was determined (Class I, II or III). All CBCT scans were evaluated in the sagittal, coronal and axial planes using the N.N.T viewer software. Results: The ramus height and distance from the mandibular foramen to the sigmoid notch in class II patients were significantly different from those in skeletal class I (P < 0.005). Distance from the mandibular canal to the anterior border of ramus in class III individuals was significantly different from that in skeletal class I individuals (P < .005). Conclusion: Length of the body of mandible in skeletal class I was significantly different from that in skeletal class II and III patients. Also, ramus height in skeletal class I was significantly different from that in skeletal class II patients. CBCT had high efficacy for accurate identification of anatomical landmarks.   Keywords Prognathism; Retrognathism; Mandible; Anatomy; Cone beam computed tomography.

scholarly journals Relationship between skeletal malocclusion and dental anomalies in Nepalese population

2019 ◽  
Vol 9 (1) ◽  
pp. 15-18
Author(s):  
Bashu Dev Pant ◽  
Anjana Rajbhandari ◽  
Resina Pradhan ◽  
Manju Bajracharya
Keyword(s):  
Third Molar ◽  
Class Ii ◽  
Class I ◽  
Class Ii Malocclusion ◽  
Class Iii ◽  
Dental Anomalies ◽  
Chi Square ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Third Molar Agenesis

Introduction: Teeth eruption is important for the development of alveolar process which increases vertical height of the face and third molar is the last tooth to erupt in the oral cavity after birth. The aim of this study was to determine relationship between skeletal malocclusion and dental anomalies in Nepalese population. Materials & Method: A sample of 170 patients with agenesis of at least one third molar was divided into four groups according to the third-molar agenesis pattern. Panoramic radiographs, lateral cephalograph and cast models were used to determine the skeletal malocclusion and associated dental anomalies. The Pearson chi-square test was used for stastical analysis. Result: Among 170 patients more than half of the patients were female with the average age being 18.15 ± 3.64 years. Majority of the patients had Class I skeletal malocclusion followed by Class II and III but on group wise comparison of patients with different skeletal patterns Class I skeletal malocclusion had highest prevalence of dental anomalies followed by Class III and Class II malocclusion. Conclusion: Prevalence of third-molar agenesis was more in skeletal class I malocclusion followed by class II and III but skeletal Class I malocclusions had more dental anomalies followed by class III and class II malocclusion.

scholarly journals Mandibular symphysis morphology and dimensions in different anteroposterior jaw relationships

2013 ◽  
Vol 84 (2) ◽  
pp. 304-309 ◽  
Author(s):  
Susan N. Al-Khateeb ◽  
Emad F. Al Maaitah ◽  
Elham S. Abu Alhaija ◽  
Serene A. Badran
Keyword(s):  
Correlation Coefficient ◽  
Alveolar Bone ◽  
Pearson Correlation ◽  
Class Ii ◽  
Class I ◽  
Pearson Correlation Coefficient ◽  
Strongly Correlated ◽  
Class Iii ◽  
Mandibular Symphysis ◽  
Lateral Cephalograms

ABSTRACT Objective: To assess the morphology and dimensions of mandibular symphysis (MS) in different anteroposterior jaw relationships and to investigate whether craniofacial parameters have any correlation with its shape and/or dimensions. Materials and Methods: Lateral cephalograms of subjects with Class I, Class II, and Class III skeletal relationships were traced. Several craniofacial and MS parameters were measured. MS parameters were compared between the three groups using analysis of variance and were correlated with the craniofacial parameters using the Pearson correlation coefficient. Results: Larger angle of concavity of the chin, more inclination of the alveolar bone toward the mandibular plane, and larger MS dimensions and area (P &lt; .001) were found with a Class III skeletal relationship compared to Class I and Class II relationships. The Pearson correlation coefficient between Id-Me and AFH was r  =  0.83 and between Id-Me and LAFH it was r  =  0.81. Conclusions: The dimensions and configuration of MS in the Class III relationship were different than those in Class I and Class II relationships; the alveolar part of MS compensated for the skeletal relationship in the Class III pattern. MS dimensions were strongly correlated to anterior facial dimensions.

scholarly journals Differences in Pharyngeal Characteristics According to Angle Class of Malocclusion

2015 ◽  
Vol 19 (1) ◽  
pp. 13-20 ◽  
Author(s):  
A. Diamantidou ◽  
N. Topouzelis ◽  
S. Sidiropoulou-Hadjigianni ◽  
N. Gkantidis
Keyword(s):  
Surface Area ◽  
Soft Palate ◽  
Class Ii ◽  
Total Surface Area ◽  
Class I ◽  
Class Iii ◽  
Obstructive Sleep ◽  
Lateral Cephalograms ◽  
Angular Measurements ◽  
Pre Treatment

SUMMARYObjectives: To investigate potential differences in the pharynx, the soft palate, the pharyngeal tonsil, and the tongue between patients with different Angle Classes of malocclusion.Study Design: Pre-treatment lateral cephalograms of 116 normal breathing individuals aged between 9 and 12 years were analyzed. 20 linear and 4 angular measurements, as well as 5 variables concerning the surface area of the pharynx and the soft palate were evaluated.Results: The angle formed by the palatal plane and the base of the skull had lower values in Class II groups. The soft palate height was smaller in Class II, div. 1 group. The angle between the soft and hard palates was smaller in Class III, followed by Class I, Class II, div. 2, and Class II, div. 1, with increasing values. The distance of the tongue from the palatal plane was larger in Class I and Class III groups. The surface area of the oropharynx was larger in Class III than in Class II groups. The total surface area of the pharynx had higher values in Class III than in Class II/1.Conclusion: Subjects with Class II malocclusion may be more prone to develop respiratory related disorders, such as obstructive sleep apnea, followed by Class I and Class III subjects.

scholarly journals A “new vista” in the assessment of antero-posterior jaw relationship

2015 ◽  
Vol 5 ◽  
pp. 151-155
Author(s):  
Divi Mittal ◽  
Shivanand Venkatesh ◽  
Prashantha Govinakovi Shivamurthy ◽  
Silju Mathew
Keyword(s):  
Sensitivity And Specificity ◽  
Roc Curves ◽  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Operating Characteristics ◽  
Lateral Cephalogram ◽  
Skeletal Class ◽  
Lateral Cephalograms ◽  
Posterior Discrepancy

Aim The purpose of this investigation was to (1) compare the credibility of four recently introduced cephalometric measurements in assessing the antero-posterior jaw relationship; (2) To assess the correlation between various measurements used for assessment of antero-posterior discrepancy, including Yen linear, Yen angle, W angle and Pi angle. Materials and Methods The sample size for the study consisted of 45 subjects with age group of 15-19 years (mean age 17 ± 2.1) and was subdivided into Skeletal Class I, II and III groups of 15 each based upon the ANB angle derived from the pre treatment lateral cephalogram. Landmarks were located and Yen angle, Yen linear, W angle and Pi angle were assessed for each group. All the lateral cephalograms were traced by a single examiner. Intra examiner reliability was assessed by Intraclass co-efficient correlation (ICC) test. Correlation coefficients were obtained for each of parameters to compare their relationship with other parameters in Class I group. Receiver operating characteristics (ROC) curves were run to examine sensitivity and specificity of all the angles. Results The results showed that ICC for all the groups were ≥0.90 showing good repeatability of the measurements. There was statistically significant correlation between Yen angle and ANB angle, Yen linear and Yen angle for Class I group, between W angle and Yen angle for Class II group, between Yen angle, Yen linear and ANB for Class III group. ROC curves showed that Pi angle had 100% sensitivity and specificity to discriminate a Class II and a Class III group from a Class I and a Class III group from a Class II. Yen linear and W angle showed very low specificity to differentiate a Class II from a Class I group. Interpretation and Conclusion The new parameters considered in the study were found to be equally reliable and are not affected much by local remodeling due to tooth movements or by occlusal or Frankfurt horizontal plane. These parameters measure the antero-posterior discrepancy more consistently and accurately, with Pi angle being the most accurate.

COMPARATIVE EVALUATION OF THE NASOPHARYNGEAL SOFT TISSUE CHARACTERISTICS BETWEEN IDEAL OCCLUSION AND CLASS III MALOCCLUSION IN DAKSHINA KANNADA POPULATION

2021 ◽  
pp. 61-64
Author(s):  
Brigit Alphonsa Gervasis ◽  
Sharath Kumar Shetty ◽  
MaheshKumarY MaheshKumarY ◽  
Laxmi Sarvani
Keyword(s):  
Sexual Dimorphism ◽  
Pearson Correlation ◽  
Cranial Base ◽  
Nasal Fossa ◽  
Class I ◽  
Ideal Class ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Lateral Cephalograms ◽  
Tissue Characteristics

Introduction :Because of the close relationship between the pharynx and the dentofacial structures, a mutual interaction is expected to occur between the pharyngeal structures and the dentofacial pattern. The aim of this study was to assess and compare the nasopharyngeal characteristics in adults with Ideal occlusion and Class III malocclusion in Dakshina Kannada population. Materials and Methods: The study sample consisted of 64 patients with Class III malocclusion and 96 subjects with Ideal Class I molar relation randomly selected from the patients visiting the department of orthodontics of various dental colleges in Dakshina Kannada district. Lateral cephalograms were manually traced, linear and area measurements were determined to dene the airway characteristics. Independent means t tests and Pearson correlation analysis were used to evaluate sexual dimorphism and the correlations among the variables. Results: Nasal fossa length, lower pharyngeal dimension, and upper adenoid width were greater in the Class III malocclusion group. The cranial base showed signicant correlation with nasal fossa length in the Class III malocclusion group. Lower pharyngeal dimension was increased in Class III malocclusion group compared to Ideal Class I occlusion. Sexual dimorphism was also found within Ideal Class I occlusion and Class III Malocclusion groups. Conclusions : From analysing the data it was found that the nasopharynx in Class III malocclusion patients in Dakshina Kannada was characterised by an increased lower pharyngeal dimension, upper adenoid width, nasal fossa dimension and also smaller cranial base length.

Sign in / Sign up

Export Citation Format

Share Document