scholarly journals STRUCTURAL CHARACTERISTICS OF EXISTING SEISMICALLY ISOLATED BUILDINGS ANALYSED BY TIME HISTORY BASED ON DATABASE AND ESTIMATION TO LONG PERIOD GROUND MOTIONS

2016 ◽  
Vol 22 (52) ◽  
pp. 901-904
Author(s):  
Koichi MORITA ◽  
Namihiko INOUE
2017 ◽  
Vol 23 (55) ◽  
pp. 809-814 ◽  
Author(s):  
Shigeo MINEWAKI ◽  
Hiroki HAMAGUCHI ◽  
Takahiro KINOSHITA ◽  
Akira NISHIMURA ◽  
Shuya FUTATSUGI ◽  
...  

Author(s):  
John X. Zhao ◽  
Jian Zhang

In this study, we present an inelastic demand spectrum for the design of seismically-isolated structures using lead-rubber bearings or other types of isolators with bi-linear hysteresis loops and the inelastic spectrum can be used in the design of seismically-isolated structures in a very similar manner to capacity spectrum method. The inelastic demand spectrum is a very useful design tool for visual selection of optimal isolation parameters, and eliminates the use of equivalent linear-elastic substitute structures as the displacement demand is obtained from nonlinear time history analysis. The responses of seismically-isolated structures subjected to near-source ground motions with either large forward-directivity pulses or fault-fling pulses are presented. Our analyses suggest that seismic isolation can be used to protect structures subjected to recorded ground motions currently available to us, with acceptable levels of base shear coefficient and isolator displacement, except for one component of the TCU068 record from the 1999 Chichi, Taiwan, earthquake (which contained a large permanent displacement of nearly 10 m).


2020 ◽  
Vol 2020 ◽  
pp. 1-24
Author(s):  
Minghui Dai ◽  
Yingmin Li

Far-field long-period ground motions (hereafter long-period ground motions) featuring low-frequency components are responsible for the resonant responses of high-rise buildings. In this context, it is beneficial to assess the dynamic performance of these buildings under long-period ground motions with the aid of time history analysis. This paper proposes a method for generating long-period motions by combining long-period components synthesized by spectral representation with high-frequency components simulated by wavelet packets. Later-arriving long-period surface waves (LALP surface waves), which are determined on the grounds of phase dispersion, represent the main long-period properties in sense of velocity spectrum at longer periods of interest. An analytical expression for power spectrum density is employed to capture the narrowband properties of LALP velocity surface waves. Meanwhile, modification of the Gaussian random process is performed in time and frequency domains to attain a modulated initial seed motion, which shows the variability of the targeted ground motion. A simulation of high-frequency components is accomplished by means of iteration, in which wavelet coefficients of the modulated seed motion are adjusted to match the targeted response spectrum and cumulative energy plot. Furthermore, comparisons between an ensemble of realizations and target motions demonstrate the feasibility of the proposed method to generate long-period simulations sharing similar properties to target motions.


2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Ke Yang ◽  
Bo Wang ◽  
Jiawei Zhang ◽  
Zhe Li ◽  
Boquan Liu

Due to abundant low-frequency components of long-period ground motions (LPGMs), long-period structures are susceptible to severe damage. The corresponding time-history displacement responses have significant “large-displacement” and “long-duration” characteristics. These action characteristics essentially reflect the different loading paths imposed on structures of LPGMs from ordinary ground motions (OGMs). Hence, revealing the influence mechanism of the action characteristics on the seismic performance of structural components is the key to investigating the influence of LPGMs on the whole structure. This paper presents a kind of quasi-static loading protocol considering the action characteristics of LPGMs. Firstly, nonlinear time-history analyses on structural systems subjected to 50 selected representative LPGMs were conducted. Inelastic cycles and corresponding amplitudes of time-history displacement responses under LPGMs were statistically analyzed through the rainflow method. Then, considering two of the most significant factors, structural period and target ductility, a prediction model of cycle number and cycle amplitude was obtained by regression. On this basis, the quasi-static loading protocol considering the action characteristics of LPGMs was developed. Proposed protocols can be directly applied to experimental investigations on the seismic performance for structural components under LPGMs.


2021 ◽  
pp. 107754632110075
Author(s):  
Junling Chen ◽  
Jinwei Li ◽  
Dawei Wang ◽  
Youquan Feng

The steel–concrete hybrid wind turbine tower is characterized by the concrete tubular segment at the lower part and the traditional steel tubular segment at the upper part. Because of the great change of mass and stiffness along the height of the tower at the connection of steel segment and concrete segment, its dynamic responses under seismic ground motions are significantly different from those of the traditional steel tubular wind turbine tower. Two detailed finite element models of a full steel tubular tower and a steel–concrete hybrid tower for 2.0 MW wind turbine built in the same wind farm are, respectively, developed by using the finite element software ABAQUS. The response spectrum method is applied to analyze the seismic action effects of these two towers under three different ground types. Three groups of ground motions corresponding to three ground types are used to analyze the dynamic response of the steel–concrete hybrid tower by the nonlinear time history method. The numerical results show that the seismic action effect by the response spectrum method is lower than those by the nonlinear time history method. And then it can be concluded that the response spectrum method is not suitable for calculating the seismic action effects of the steel–concrete hybrid tower directly and the time history analyses should be a necessary supplement for its seismic design. The first three modes have obvious contributions on the dynamic response of the steel–concrete hybrid tower.


Sign in / Sign up

Export Citation Format

Share Document