ALCOTEC FILLER METAL 5180

Alloy Digest ◽  
1992 ◽  
Vol 41 (9) ◽  
Keyword(s):  
Tensile Properties ◽  
Base Metal ◽  
Filler Metal ◽  
Heat Treating ◽  
Thermal Treatments ◽  
Thin Walls ◽  
The Wire

Abstract ALCOTEC Filler Metal 5180 is a weld wire in the Al-Zn-Mg aluminum family that responds to post-weld thermal treatments. The wire is especially useful to match base-metal strengths in thin walls. This datasheet provides information on composition and tensile properties. It also includes information on heat treating and joining. Filing Code: Al-325. Producer or source: AlcoTec Wire Corporation.

NIMROD 617KS

Alloy Digest ◽  
2002 ◽  
Vol 51 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Weld Metal ◽  
Tensile Properties ◽  
Base Metal ◽  
Heat Treating ◽  
Nominal Composition

Abstract Nimrod 617KS is an Inconel-type consumable with a nominal composition of nickel, 24% Cr,12% Co, and 9% Mo and is used to join UNS N06617 and Nicrofer 6023 to themselves. The alloy is designed for high-temperature service and is often used as the weld metal in dissimilar cases to ensure the weld is as strong as the base metal. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and joining. Filing Code: Ni-583. Producer or source: Metrode Products Ltd.

NIMROD 625, 625KS

Alloy Digest ◽  
2002 ◽  
Vol 51 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Base Metal ◽  
Heat Treating ◽  
Similar Composition ◽  
Temperature Performance

Abstract Nimrod 625 and 625KS are Inconel-type consumables with molybdenum and niobium. They are used to join UNS N06625 and Nicrofer 6020hMo of similar composition and also for other lower alloys to ensure the weld has as good or better corrosion resistance as does the base metal. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: Ni-581. Producer or source: Metrode Products Ltd.

INCO-WELD 725NDUR

Alloy Digest ◽  
1998 ◽  
Vol 47 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Tensile Properties ◽  
Filler Metal ◽  
Heat Treating ◽  
Oil Exploration ◽  
Corrosion Resistant ◽  
Resistant Alloy ◽  
Corrosion Resistant Alloy

Abstract Inco-Weld 725NDUR filler metal is a corrosion-resistant alloy similar to Inconel Filler Metal 625 (see Alloy Digest Ni-327, December 1985) but with higher strength and hardness. Applications include the oil exploration down-hole equipment market. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Ni-540. Producer or source: Inco Alloys International Inc.

AA B443.0

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract AA B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-270. Producer or source: Various aluminum companies.

UCI-190

Alloy Digest ◽  
1997 ◽  
Vol 46 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Metal ◽  
Creep Resistance ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance ◽  
Steam Cracking

Abstract UCI-190 (HP) material is a general-purpose alloy for use in steam-cracking tubes and fittings and reformer furnaces. HP alloy has carburization, oxidation, and creep resistance at temperatures up to 2000 F. The alloy is weldable by GTAW, GMAW, and SMAW using electrodes with composition matching the base metal (25Cr-35Ni) or NiCrCoMo-1 (AWS 5.11 and AWS 5.14). Preheat or post heat normally are not required. UCI-190 has been used for many years providing consistent and predictable results in high-temperature applications. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-689. Producer or source: Ultra-Cast Inc.

INCONEL FILLER METAL 718

Alloy Digest ◽  
1986 ◽  
Vol 35 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Weld Metal ◽  
Tensile Properties ◽  
Arc Welding ◽  
Filler Metal ◽  
Heat Treating ◽  
Base Metals ◽  
Gas Tungsten Arc ◽  
Inconel Alloys

Abstract INCONEL Filler Metal 718 is used for gas-tungsten-arc welding of INCONEL alloys 718, 706 and X-750. The weld metal is age hardenable and its mechanical properties are comparable to those of the base metals. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-333. Producer or source: Inco Alloys International Inc..

ALUMINUM B443.0

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract ALUMINUM B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-214. Producer or source: Various aluminum companies.

NICROFER 5020 HMO (50 PLUS)

Alloy Digest ◽  
2003 ◽  
Vol 52 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Filler Metal ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract Nicrofer 5020 hMo (also known as 50 PLUS) is a low-carbon Ni-Cr-Fe-Mo alloy with excellent wet corrosion resistance. The alloy has versatility in use as a wrought alloy or filler metal for lower-alloy materials such as 6–7% Mo stainless steels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-616. Producer or source: ThyssenKrupp VDM GmbH.

INCONEL FILLER METAL 52MSS

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Tensile Properties ◽  
Filler Metal ◽  
Heat Treating ◽  
Filler Metals

Abstract Inconel Filler Metal 52MSS contains about 2.0–2.5 wt.% Nb and 3.0–4.0 wt% Mo, which have been shown to improve resistance to ductility dip cracking, and has reduced aluminum and titanium, which provide the ability to deposit very clean weld deposits without the floating oxide impurities of other previously used filler metals. This datasheet provides information on composition and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: Ni-706. Producer or source: Special Metals Welding Products Corporation.

BELMONT ALLOY 4582

Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Special Needs ◽  
Tensile Properties ◽  
Base Metal ◽  
Heat Treating ◽  
Metal Alloy ◽  
Base Metal Alloy

Abstract BELMONT Alloy 4582 is a alloy developed to meet the special needs of jewelers for a base-metal alloy suitable for casting centrifugally in refractory molds. It can be joined readily to itself and other alloys by soldering or brazing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-353. Producer or source: Belmont Metals Inc..

Sign in / Sign up

Export Citation Format

Share Document