INCONEL FILLER METAL 52MSS

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Tensile Properties ◽  
Filler Metal ◽  
Heat Treating ◽  
Filler Metals

Abstract Inconel Filler Metal 52MSS contains about 2.0–2.5 wt.% Nb and 3.0–4.0 wt% Mo, which have been shown to improve resistance to ductility dip cracking, and has reduced aluminum and titanium, which provide the ability to deposit very clean weld deposits without the floating oxide impurities of other previously used filler metals. This datasheet provides information on composition and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: Ni-706. Producer or source: Special Metals Welding Products Corporation.

INCO-WELD 725NDUR

Alloy Digest ◽  
1998 ◽  
Vol 47 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Tensile Properties ◽  
Filler Metal ◽  
Heat Treating ◽  
Oil Exploration ◽  
Corrosion Resistant ◽  
Resistant Alloy ◽  
Corrosion Resistant Alloy

Abstract Inco-Weld 725NDUR filler metal is a corrosion-resistant alloy similar to Inconel Filler Metal 625 (see Alloy Digest Ni-327, December 1985) but with higher strength and hardness. Applications include the oil exploration down-hole equipment market. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Ni-540. Producer or source: Inco Alloys International Inc.

ALCOTEC FILLER METAL 5180

Alloy Digest ◽  
1992 ◽  
Vol 41 (9) ◽  
Keyword(s):  
Tensile Properties ◽  
Base Metal ◽  
Filler Metal ◽  
Heat Treating ◽  
Thermal Treatments ◽  
Thin Walls ◽  
The Wire

Abstract ALCOTEC Filler Metal 5180 is a weld wire in the Al-Zn-Mg aluminum family that responds to post-weld thermal treatments. The wire is especially useful to match base-metal strengths in thin walls. This datasheet provides information on composition and tensile properties. It also includes information on heat treating and joining. Filing Code: Al-325. Producer or source: AlcoTec Wire Corporation.

METGLAS MBF-60/60A

Alloy Digest ◽  
1982 ◽  
Vol 31 (8) ◽  
Keyword(s):  
Metallic Glass ◽  
Physical Properties ◽  
Nuclear Reactor ◽  
Filler Metal ◽  
Flow Characteristics ◽  
Heat Treating ◽  
Large Production ◽  
Filler Metals ◽  
Joint Erosion

Abstract METGLAS MBF-60A is a brazing foil in ductile, flexible metallic-glass form (a similar grade, MBF-60, is identical except that it has larger dimensional tolerances). It is an excellent choice of filler metal for large production runs of low-to-medium stressed assemblies. Its excellent flow characteristics and low joint erosion recommend its selection, despite the fact that it has only moderate strength in comparison with other filler metals of this family. It is boron-free and thus is recommended for nuclear reactor applications. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on forming, heat treating, and joining. Filing Code: Ni-278. Producer or source: Allied Corporation.

INCONEL FILLER METAL 718

Alloy Digest ◽  
1986 ◽  
Vol 35 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Weld Metal ◽  
Tensile Properties ◽  
Arc Welding ◽  
Filler Metal ◽  
Heat Treating ◽  
Base Metals ◽  
Gas Tungsten Arc ◽  
Inconel Alloys

Abstract INCONEL Filler Metal 718 is used for gas-tungsten-arc welding of INCONEL alloys 718, 706 and X-750. The weld metal is age hardenable and its mechanical properties are comparable to those of the base metals. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-333. Producer or source: Inco Alloys International Inc..

ALCOTEC WELD FILLER WIRE 4643

Alloy Digest ◽  
2002 ◽  
Vol 51 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Filler Metal ◽  
Filler Wire ◽  
Multipass Welding ◽  
Filler Metals ◽  
6Xxx Series

Abstract AlcoTec Filler Metal 4643 is a reduced-silicon, magnesium-added filler metal used to weld the 6xxx series alloys. Welds meet the high mechanical properties of the 6xxx series, particularly in multipass welding and when low dilution exists. There is no advantage in using 4643 compared to 4043 or other filler metals when no heat treatment is done after welding. The corrosion resistance is very good. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: AL-324. Producer or source: AlcoTec Wire Corporation. Originally published August 1992, revised March 2002.

NICROFER 5020 HMO (50 PLUS)

Alloy Digest ◽  
2003 ◽  
Vol 52 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Filler Metal ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract Nicrofer 5020 hMo (also known as 50 PLUS) is a low-carbon Ni-Cr-Fe-Mo alloy with excellent wet corrosion resistance. The alloy has versatility in use as a wrought alloy or filler metal for lower-alloy materials such as 6–7% Mo stainless steels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-616. Producer or source: ThyssenKrupp VDM GmbH.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

NILOMAG 77

Alloy Digest ◽  
1995 ◽  
Vol 44 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Initial Permeability ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
High Level

Abstract NILOMAG ALLOY 77 is a 77 Ni soft magnetic alloy with a high level of initial permeability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Ni-488. Producer or source: Inco Alloys International Inc.

NICROFER 5520 Co

Alloy Digest ◽  
1995 ◽  
Vol 44 (3) ◽  
Keyword(s):  
High Temperature ◽  
Chemical Composition ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Creep Properties ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract NICROFER 5520 Co is a nickel-chromium-cobalt-molybdenum alloy with excellent strength and creep properties up to high temperatures. Due to its balanced chemical composition the alloy shows outstanding resistance to high temperature corrosion in the form of oxidation and carburization. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-480. Producer or source: VDM Technologies Corporation.

CARLSON ALLOY C601

Alloy Digest ◽  
1994 ◽  
Vol 43 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
High Temperatures ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Resistance To Stress ◽  
Extended Exposure ◽  
Sulfur Containing

Abstract Carlson Alloy C601 is characterized by high tensile, yield and creep-rupture strengths for high temperature service. The alloy is not embrittled by extended exposure to high temperatures and has excellent resistance to stress-corrosion cracking, to carburizing, nitriding and sulfur containing environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-458. Producer or source: G.O. Carlson Inc.

Sign in / Sign up

Export Citation Format

Share Document