RMI 40

Alloy Digest ◽  
1979 ◽  
Vol 28 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Low Temperatures ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 40 is a grade of commercially pure unalloyed titanium. It has a guaranteed minimum yield strength of 40,000 psi with good ductility and formability. Its strength is about the same as that of the annealed austenitic stainless steels. It has good impact properties at low temperatures and excellent resistance to corrosion by marine atmospheres and seawater. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-72. Producer or source: RMI Company.

RMI 25

Alloy Digest ◽  
1980 ◽  
Vol 29 (4) ◽  
Keyword(s):  
Yield Strength ◽  
Stainless Steels ◽  
Pure Titanium ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 25 is a grade of commercially pure titanium. It has a guaranteed minimum yield strength of 25,000 psi with good ductility and formability. Its yield strength is about the same as that of the annealed austenitic stainless steels of lowest yield strength. It has excellent resistance to corrosion by many chemicals, seawater and marine atmospheres. It is used for equipment in the chemical and marine industries. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-76. Producer or source: RMI Company.

SANDVIK SAF 2304

Alloy Digest ◽  
1987 ◽  
Vol 36 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK SAF 2304 is a duplex (ferritic-austenitic) stainless steel of extra-low carbon content. Its yield strength is about double that of austenitic stainless steels and it has very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-483. Producer or source: Sandvik.

CARPENTER STAINLESS TYPE 309/309S

Alloy Digest ◽  
2000 ◽  
Vol 49 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Temperature Performance ◽  
Type 304

Abstract Carpenter Stainless Types 309 and 309S are austenitic stainless steels with superior oxidation resistance and high temperature strength compared to Type 304, the basic grade in this series. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-804. Producer or source: Carpenter.

MST GRADE III

Alloy Digest ◽  
1957 ◽  
Vol 6 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Impact Strength ◽  
Melting Process ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Grade Iii

Abstract MST Grae III is commercially pure, unalloyed titanium made by the Method S melting process, offering improved weldability and impact strength This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-11. Producer or source: Mallory-Sharon Titanium Corporation.

ALLEGHENY STAINLESS AM-363

Alloy Digest ◽  
1974 ◽  
Vol 23 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Martensitic Stainless Steel ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Welding Properties

Abstract ALLEGHENY STAINLESS AM-363 is an economical, low-carbon martensitic stainless steel. It is higher in strength than annealed austenitic stainless steels but maintains their excellent forming and welding properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-297. Producer or source: Allegheny Ludlum Corporation.

MAGNESIUM ZK60A

Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Temperature Performance

Abstract Magnesium ZK60A is a heat treatable extrusion and forging alloy recommended for applications where high strength with good toughness are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-62. Producer or source: The Dow Chemical Company.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

RMI 0.2% Pd

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Crevice Corrosion ◽  
Elevated Temperatures ◽  
Pure Titanium ◽  
Heat Treating ◽  
Low Ph ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 0.2% Pd is a grade of commercially pure titanium to which up to 0.2% palladium has been added. It has a guaranteed minimum yield strength of 40,000 psi with good ductility and formability. It is recommended for corrosion resistance in the chemical industry and other places where the environment is mildly reducing or varies between oxidizing and reducing. The alloy has improved resistance to crevice corrosion at low pH and elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-74. Producer or source: RMI Company.

JOSLYN STAINLESS TYPE 305H

Alloy Digest ◽  
1966 ◽  
Vol 15 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Work Hardening ◽  
Heat Treating ◽  
Nickel Steel ◽  
Temperature Performance ◽  
Hardening Factor

Abstract Joslyn Stainless Type-305H is a modified austenitic chromium-nickel steel recommended for severe cold heading applications because of its low work-hardening factor. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-178. Producer or source: Joslyn Stainless Steels.

FIRTH VICKERS F.I. (A1)

Alloy Digest ◽  
1970 ◽  
Vol 19 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Stainless Steels ◽  
Heat Treating ◽  
Oil Refining ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
Plant Equipment ◽  
Corrosion Resistant Alloy

Abstract FIRTH VICKERS FI (A1) is a chromium type heat and corrosion resistant alloy steel recommended for oil refining and chemical plant equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-236. Producer or source: Firth-Vickers Stainless Steels Ltd.

Sign in / Sign up

Export Citation Format

Share Document