DRX

Alloy Digest ◽  
2005 ◽  
Vol 54 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Production Volume ◽  
Annealed Condition ◽  
Temperature Performance ◽  
High Production Volume ◽  
Heat Treated ◽  
High Production ◽  
Wear Condition

Abstract DRX is similar to AISI S7. It has a higher carbon content and is alloyed with 3.25% Cr and 1.4% Mo for emphasis on good wear resistance. DRX is typically used for inserts or smaller molds in applications requiring high production volume, or molds subjected to high-wear condition. It is supplied in the annealed condition and typically heat treated to a hardness of 45 HRC or greater after machining. This datasheet provides information on composition and hardness. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TS-624. Producer or source: A. Finkl & Sons Company.

REYNOLDS 390 and A390

Alloy Digest ◽  
1971 ◽  
Vol 20 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Silicon Alloys ◽  
Aluminum Silicon Alloys ◽  
Temperature Performance

Abstract REYNOLDS 390 and A390 are hypereutectic aluminum-silicon alloys having excellent wear resistance coupled with good mechanical properties, high hardness, and low coefficients of expansion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-203. Producer or source: Reynolds Metals Company.

RED X-20

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Aluminum Silicon Alloy ◽  
Temperature Performance

Abstract RED X-20 is a heat treatable hypereutectic aluminum-silicon alloy with excellent wear resistance and a very low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-89. Producer or source: Apex Smelting Company.

NUCALLOY 45

Alloy Digest ◽  
1977 ◽  
Vol 26 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Commercial Applications

Abstract NUCALLOY 45 is a nickel-chromium-boron alloy which derives superior wear resistance from the presence of hard nickel borides (and to a lesser extent chromium carbides) tightly held in a nickel-rich matrix. It is used in many commercial applications because of its toughness and high resistance to attack by many chemicals. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-238. Producer or source: Stoody Company.

UNS G61200

Alloy Digest ◽  
1991 ◽  
Vol 40 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Heat Treating ◽  
Case Hardening ◽  
Steel Mills ◽  
Temperature Performance ◽  
Treated Condition ◽  
Heat Treated ◽  
High Fatigue ◽  
Heat Treated Condition

Abstract UNS G62100 is a tough, shock resisting, case-hardening chromium-vanadium steel. It has high fatigue resistance in the heat treated condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-458. Producer or source: Alloy steel mills and foundries.

CHW

Alloy Digest ◽  
1959 ◽  
Vol 8 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Steel Corporation

Abstract CHW is a high tungsten hot work steel having highest hardness and good wear resistance. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-81. Producer or source: Latrobe Steel Corporation.

MILNE CMV

Alloy Digest ◽  
1961 ◽  
Vol 10 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Tool Steel ◽  
Compression Strength ◽  
Heat Treating ◽  
Medium Carbon ◽  
Temperature Performance

Abstract Milne CMV is a 5% chromium, medium-carbon hot work tool steel, having high compression strength, wear resistance, and corrosion resistance. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-111. Producer or source: A. Milne & Company (Distributor).

CARPENTER STAINLESS No. 7-Mo

Alloy Digest ◽  
1974 ◽  
Vol 23 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Exchangers ◽  
Heat Treating ◽  
General Corrosion ◽  
Annealed Condition ◽  
Two Phase ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract CARPENTER STAINLESS No. 7-Mo is a two-phase alloy consisting of a ferritic matrix with pools of austenite. It has high resistance to stress-corrosion cracking and pitting, and good general corrosion resistance in many environments. Its principal use is for tubing and pipe in heat exchangers involving corrosive conditions. It is normally used in the annealed condition for maximum corrosion resistance and ductility. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-298. Producer or source: Carpenter.

CARPENTER T-K

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Red Hardness

Abstract Carpenter T-K is a tungsten-chromium type hot-work steel having good red-hardness and resistance to abrasion. It will withstand high operating temperatures up to 1000 F for long periods. It is recommended for hot shear blades, forging and extrusion dies, hot compression tools, and similar applications where high compressive strength and wear resistance at elevated temperatures are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-219. Producer or source: Carpenter.

CRUCIBLE 309

Alloy Digest ◽  
1982 ◽  
Vol 31 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
High Heat ◽  
Nickel Steel ◽  
Annealed Condition ◽  
Temperature Performance ◽  
Cold Worked ◽  
Specialty Metals

Abstract CRUCIBLE 309 is a non-hardenable austenitic chromium-nickel steel that has high heat-resisting characteristics. In the annealed condition it is non-magnetic or magnetic, depending on the composition. When cold worked it is very slightly magnetic. Typical applications include aircraft heaters and sulfite liquor handling equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: SS-405. Producer or source: Crucible Specialty Metals Division, Colt Industries.

CRUCIBLE CPM REX 121

Alloy Digest ◽  
2001 ◽  
Vol 50 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Maximum Hardness ◽  
Temperature Performance ◽  
Red Hardness ◽  
Cutting Speeds

Abstract CPM Rex 121 is a super high-speed steel with significantly higher wear resistance and red hardness than other high-speed steels. It is best suited for applications requiring high cutting speeds. It may provide an alternative to carbide where carbide cutting edges are too fragile. The annealed hardness is approximately 350-400 HB, and maximum hardness is approximately 72 HRC. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and surface treatment. Filing Code: TS-591. Producer or source: Crucible.

Sign in / Sign up

Export Citation Format

Share Document