Solution of Pavement Deterioration Equations by Genetic Algorithms

2000 ◽  
Vol 1699 (1) ◽  
pp. 101-106 ◽  
Author(s):  
A. Raja Shekharan
Keyword(s):  
Genetic Algorithms ◽  
Model Development ◽  
Complex Model ◽  
Predictor Variables ◽  
Easy Task ◽  
Advantages And Disadvantages ◽  
Pavement Deterioration ◽  
High Degree ◽  
The Relationship

Pavement deterioration models are indispensable for many purposes; as a result, a number of models are in use. Models with simple equation forms are easier to use, but frequently such models may not suffice for many purposes. Consequently, complex nonlinear forms of models are to be considered. However, determination of the solution to a complex model form is not an easy task. There are various methods of obtaining solutions to such models, with each method having its own advantages and disadvantages. The use of genetic algorithms for model development is examined in this study. A very brief description of genetic algorithms is included, and their application for the development of a model is illustrated. Five models of varied complexities, extracted from the literature, are employed to create databases in which the relationship between the response and the predictor variables is known. The solutions to the models are developed employing genetic algorithms. The results indicate a high degree of accuracy, which suggests that genetic algorithms are useful as a tool for development of solutions to pavement deterioration models.

EVALUATION OF PROTEIN IN FOODS: IV. A SIMPLIFIED CHEMICAL SCORE

1959 ◽  
Vol 37 (1) ◽  
pp. 1293-1299 ◽  
Author(s):  
J. M. McLaughlan ◽  
C. G. Rogers ◽  
D. G. Chapman ◽  
J. A. Campbell
Keyword(s):  
Rapid Screening ◽  
Assay Method ◽  
Efficiency Ratio ◽  
Lysine Concentration ◽  
Chemical Score ◽  
Group A ◽  
High Degree ◽  
The Relationship ◽  
Bio Assay

Available evidence has shown that most common foods are deficient in lysine, methionine, or in methionine and cystine. Based on the determination of these amino acids, a simplified chemical score was developed and compared with protein efficiency ratio (P.E.R.) values determined with the same samples. Each of 43 foods was assigned to either of two categories: (a) foods apparently deficient in lysine or (b) in methionine (+ cystine). With 16 foods in the former group there was a high degree of correlation between lysine concentration and P.E.R. With 27 foods in the latter group, a good correlation was found between the methionine (+ cystine) concentration and P.E.R. Since the regression lines for the two groups were different, a factor was added to the methionine (+ cystine) values to simplify the relationship. That foods deficient in lysine or in methionine (+ cystine) fell into two distinct groups appeared to be substantiated by data available in the literature. Because the simplified method is relatively rapid, yields reproducible results, and correlates with animal assays, it is proposed as a rapid screening procedure for the evaluation of protein in foods, but is not intended to replace the rat bio-assay method.

EVALUATION OF PROTEIN IN FOODS: IV. A SIMPLIFIED CHEMICAL SCORE

1959 ◽  
Vol 37 (11) ◽  
pp. 1293-1299 ◽  
Author(s):  
J. M. McLaughlan ◽  
C. G. Rogers ◽  
D. G. Chapman ◽  
J. A. Campbell
Keyword(s):  
Rapid Screening ◽  
Assay Method ◽  
Efficiency Ratio ◽  
Lysine Concentration ◽  
Chemical Score ◽  
Group A ◽  
High Degree ◽  
The Relationship ◽  
Bio Assay

Available evidence has shown that most common foods are deficient in lysine, methionine, or in methionine and cystine. Based on the determination of these amino acids, a simplified chemical score was developed and compared with protein efficiency ratio (P.E.R.) values determined with the same samples. Each of 43 foods was assigned to either of two categories: (a) foods apparently deficient in lysine or (b) in methionine (+ cystine). With 16 foods in the former group there was a high degree of correlation between lysine concentration and P.E.R. With 27 foods in the latter group, a good correlation was found between the methionine (+ cystine) concentration and P.E.R. Since the regression lines for the two groups were different, a factor was added to the methionine (+ cystine) values to simplify the relationship. That foods deficient in lysine or in methionine (+ cystine) fell into two distinct groups appeared to be substantiated by data available in the literature. Because the simplified method is relatively rapid, yields reproducible results, and correlates with animal assays, it is proposed as a rapid screening procedure for the evaluation of protein in foods, but is not intended to replace the rat bio-assay method.

Implementation of Genetic Algorithms Into Development of Mechatronic Multi-Edge’s Grinder Design

2011 ◽  
Author(s):  
Jo´zef Flizikowski ◽  
Marek Macko ◽  
Jacek Czerniak ◽  
Adam Mrozinski
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
Input Data ◽  
Mechanical Design ◽  
Fitness Function ◽  
Complete Solution ◽  
Morphological Operations ◽  
Positive Effects ◽  
The Relationship

Authors of the study propose the method aiming at determination of design properties of a multi-edge grinder. This method is based on a genetic algorithm and its purpose is to optimise the geometric shape of the cutting edges. The input data include population of individuals. Each individual is represented by a set of cutting disks. Whereas the fitness function was assumed as a combination of several postulates of the mechanical design foundations. Those postulates include mechanical, design and energy metrics. Each individual constitutes a complete solution of the disk set whereas the population represents the entire class of solutions. The fitness function of an individual is calculated as the fitness average of each disk supplemented by information describing the relationship between both disks and discs. The method for calculating function values was selected to ensure its maximisation in the process of evolution. Despite promising results of the genetic algorithms operation, one can consider improvement of the method efficiency. The authors used morphological operations in order to better adjust the method to the task. Results of the simulations were verified in laboratory conditions with positive effects.

Feasibility of Molecular Structure Determination With a High Resolution Electron Microscope

1968 ◽  
Vol 26 ◽  
pp. 338-339
Author(s):  
T. A. Welton
Keyword(s):  
Electron Microscope ◽  
Substrate Surface ◽  
Helical Axis ◽  
Base Plane ◽  
Resolution Electron ◽  
High Resolution Electron Microscope ◽  
High Degree ◽  
Degree Of Order ◽  
Purine Pyrimidine

An ultimate design goal for an improved electron microscope, aimed at biological applications, is the determination of the structure of complex bio-molecules. As a prototype of this class of problems, we propose to examine the possibility of reading DNA sequence by an imaginable instrument design. This problem ideally combines absolute importance and relative simplicity, in as much as the problem of enzyme structure seems to be a much more difficult one.The proposed technique involves the deposition on a thin graphite lamina of intact double helical DNA rods. If the structure can be maintained under vacuum conditions, we can then make use of the high degree of order to greatly reduce the work involved in discriminating between the four possible purine-pyrimidine arrangements in each base plane. The phosphorus atoms of the back bone form in projection (the helical axis being necessarily parallel to the substrate surface) two intertwined sinusoids. If these phosphorus atoms have been located up to a certain point on the molecule, we have available excellent information on the orientation of the base plane at that point, and can then locate in projection the key atoms for discrimination of the four alternatives.

Thromboplastin Related Differences in the Determination of International Normalised Ratio: A Cause for Concern?

1994 ◽  
Vol 72 (03) ◽  
pp. 426-429 ◽  
Author(s):  
S Kitchen ◽  
I D Walker ◽  
T A L Woods ◽  
F E Preston
Keyword(s):  
Patient Management ◽  
External Quality Assessment ◽  
Oral Anticoagulant Therapy ◽  
Warfarin Dosage ◽  
External Quality ◽  
External Quality Assessment Scheme ◽  
International Normalised Ratio ◽  
The Uk ◽  
The Relationship

SummaryWhen the International Normalised Ratio (INR) is used for control of oral anticoagulant therapy the same result should be obtained irrespective of the laboratory reagent used. However, in the UK National External Quality Assessment Scheme (NEQAS) for Blood Coagulation INRs determined using different reagents have been significantly different.For 18 NEQAS samples Manchester Reagent (MR) was associated with significantly lower INRs than those obtained using Diagen Activated (DA, p = 0.0004) or Instrumentation Laboratory PT-Fib HS (IL, p = 0.0001). Mean INRs for this group were 3.15, 3.61, and 3.65 for MR, DA, and IL respectively. For 61 fresh samples from warfarin-ised patients with INRs of greater than 3.0 the relationship between thromboplastins in respect of INR was similar to that observed for NEQAS data. Thus INRs obtained with MR were significantly lower than with DA or IL (p <0.0001). Mean INRs for this group were 4.01, 4.40, and 4.59 for MR, DA, and IL respectively.We conclude that the differences between INRs measured with the thromboplastins studied here are sufficiently great to influence patient management through warfarin dosage schedules, particularly in the upper therapeutic range of INR. There is clearly a need to address the issues responsible for the observed discrepancies.

Modern determinants of endometrium hyperplastic processes pathogenesis

2016 ◽  
pp. 137-142
Author(s):  
V.O. Benyuk ◽  
◽  
V.M. Goncharenko ◽  
T.R. Nykoniuk ◽  
◽  
...  
Keyword(s):  
Conservative Therapy ◽  
Solid Phase ◽  
Research Direction ◽  
Immunohistochemical Method ◽  
Results Of Treatment ◽  
Treatment And Prevention ◽  
Receptor Phenotype ◽  
The Relationship ◽  
Endometrial Proliferation

The objective: to еxplore the relationship between the activity of endometrial proliferation and the state of the local immune response in the uterus in the conditions berprestasi process. Patients and methods. Examined 228 women of reproductive and perimenopausal age with endometrial pathology using ultrasound and then performing hysteroresectoscopy. Determination of the concentrations of the cytokines IL-1, IL-2, IL-6 and TNF was performed by solid phase ELISA. Results. Found a trend that confirms the loss of sensitivity to hormones at the stage of malignancy of the endometrium and can be used as diagnostic determinants in determining the nature of intrauterine pathology and criterion of the effectiveness of conservative therapy. Conclusion. Improving etiopatogenetice approach to the therapy of hyperplastic proce.sses of endometrium with determination of receptor phenotype of the endometrium is a research direction in modern gynecology, which will help to improve the results of treatment and prevention of intrauterine pathology. Key words: endometrial hyperplasia,the receptors for progesterone and estrogen, immunohistochemical method.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

Tire Treadwear — A Comprehensive Evaluation of the Factors: Generic Type, Aspect Ratio, Tread Pattern, and Tread Composition Part I: Introduction and Details on the Organization of the Program

1986 ◽  
Vol 14 (4) ◽  
pp. 201-218 ◽  
Author(s):  
A. G. Veith
Keyword(s):  
Aspect Ratio ◽  
Comprehensive Evaluation ◽  
Test Method ◽  
Interactive Effects ◽  
Data Analyses ◽  
Main Effect ◽  
Systematic Determination ◽  
Relationship Of ◽  
The Relationship

Abstract This four-part series of papers addresses the problem of systematic determination of the influence of several tire factors on tire treadwear. Both the main effect of each factor and some of their interactive effects are included. The program was also structured to evaluate the influence of some external-to-tire conditions on the relationship of tire factors to treadwear. Part I describes the experimental design used to evaluate the effects on treadwear of generic tire type, aspect ratio, tread pattern (groove or void level), type of pattern (straight rib or block), and tread compound. Construction procedures and precautions used to obtain a valid and functional test method are included. Two guiding principles to be used in the data analyses of Parts II and III are discussed. These are the fractional groove and void concept, to characterize tread pattern geometry, and a demonstration of the equivalence of wear rate for identical compounds on whole tread or multi-section tread tires.

The Awareness Level of the Safety and Health of the Operational Level

2017 ◽  
Vol 3 (1) ◽  
pp. 42
Author(s):  
Roshanira Che Mohd Noor ◽  
Nur Atiqah Rochin Demong
Keyword(s):  
Health And Safety ◽  
Health Conditions ◽  
Effective Strategies ◽  
Operational Level ◽  
Safety And Health ◽  
Health Factors ◽  
The Cost ◽  
The Relationship ◽  
Awareness Level

Providing a safe and healthy workplace is one of the most effective strategies in for holding down the cost of doing construction business. It was a part of the overall management system to facilitate themanagement of the occupational health and safety risk that are associated with the business of the organization. Factors affected the awareness level inclusive of safety and health conditions, dangerous working area, long wait care and services and lack of emergency communication werethe contributed factors to the awareness level for the operational level. Total of 122 incidents happened at Telekom Malaysia Berhad as compared to year 2015 only 86 cases. Thus, the main objective of this study was to determine the relationship between safety and health factors and the awareness level among operational workers.The determination of this research was to increase the awareness level among the operational level workerswho committing to safety and health environment.

TO STUDY THE DYNAMICS OF IMMUNITY IN BLACK-AND-WHITE COWS DEPENDING ON AGE

2020 ◽  
pp. 49-52
Author(s):  
М.В. ДОВЫДЕНКОВА
Keyword(s):  
Bactericidal Activity ◽  
Phagocytic Activity ◽  
Physiological State ◽  
Age Groups ◽  
Statistical Processing ◽  
Natural Resistance ◽  
Black And White ◽  
Feeding Methods ◽  
High Degree ◽  
The Relationship

Проведена статистическая обработка сформированной базы данных показателей неспецифической резистентности MS «Excel» с целью изучения динамики иммунитета по параметрам бактерицидной, лизоцимной и фагоцитарной активности у крупного рогатого скота черно-пестрой породы разных возрастов. Было установлено, что средние значения показателей лизоцимной и бактерицидной активности у телят в 6 мес были ниже (47,89% и 49,09%, соответственно), чем у животных в 3—4 года (53,75% и 52,81%). Выведено уравнение регрессии, описывающее взаимосвязь между средними показателями фагоцитарной активности и возрастом при высокой степени достоверности (R2=0,90). Изменения лизоцимной и бактерицидной активности в зависимости от возраста были недостоверными (R2=0,58 и R2=0,49, соответственно). Установлена высокая корреляция между бактерицидной и лизоцимной активностью. Отмечена динамика изменения неспецифического иммунитета у коров различных возрастных групп. Создание баз данных и постоянный мониторинг основных показателей естественной резистентности в зависимости от различных факторов (породы, возраста, стадий лактации, кормления, способов содержания), которые влияют на данные показатели, необходимо для оценки физиологического состояния организма животных и их устойчивости к болезням. Statistical processing of the generated MS "Excel" on indicators of non-specific resistance database was carried out with the aim of studying the dynamics of the development of immunity in terms of bactericidal, lysozyme and phagocytic activity in black-and-white cattle of different ages. It was found that the average values of indicators of lysozyme and bactericidal activity in calves at 6 months were lower (47.89% and 49.09%, respectively) than in animals at the age of 3—4 years (53.75% and 52.81%). The equation of regression was derived, it describes the relationship between the average indicators of phagocytic activity and the age with a high degree of reliability (R2=0.90). The changes in lysozyme and bactericidal activity depending on age were dubious (R2=0.58 and R2=0.49, respectively). The high correlation between bactericidal and lysozyme activity was established. It was noticed that the cows of different age groups experienced the dynamics of changes in nonspecific immunity. The creation of databases and constant monitoring of the main indicators of natural resistance, depending on various factors (breed, age, stages of lactation, feeding, methods of keeping) that affect these indicators, is necessary for assessing the physiological state of the animals’ body of and their resistance to diseases.

Sign in / Sign up

Export Citation Format

Share Document