scholarly journals Utilization of marine by-products for the recovery of value-added products

2019 ◽  
Vol 6 ◽  
Author(s):  
Fereidoon Shahidi ◽  
Vamadevan Varatharajan ◽  
Han Peng ◽  
Ruchira Senadheera

The world fisheries resources have exceeded 160 million tons in recent years. However, every year a considerable amount of total catch is discarded as by-catch or as processing leftovers, and that includes trimmings, fins, frames, heads, skin, viscera and among others. In addition, a large quantity of processing by-products is accumulated as shells of crustaceans and shellfish from marine bioprocessing plants. Recognition of the limited marine resources and the increasing environmental pollution has emphasized the need for better utilization of the by-products. Marine by-products contain valuable protein and lipid fractions, minerals, enzymes as well as many other components. The major fraction of by-products are used for feed production—in making fish meal/oil, but this has low profitability. However, there are many ways in which the fish and shellfish waste could be better utilized, including the production of novel food ingredients, nutraceuticals, pharmaceuticals, biomedical materials, fine chemicals, and other value-added products. In recent times, much research is conducted in order to explore the possible uses of different by-products. This contribution primarily covers the characteristics and utilization of the main ingredients such as protein, lipid, chitin and its derivatives, enzymes, carotenoids, and minerals originating from marine by-products.

2019 ◽  
Vol 6 ◽  
Author(s):  
Fereidoon Shahidi ◽  
Vamadevan Varatharajan ◽  
Han Peng ◽  
Ruchira Senadheera

The world fisheries resources have exceeded 160 million tons in recent years. However, every year a considerable amount of total catch is discarded as by-catch or as processing leftovers, and that includes trimmings, fins, frames, heads, skin, viscera and among others. In addition, a large quantity of processing by-products is accumulated as shells of crustaceans and shellfish from marine bioprocessing plants. Recognition of the limited marine resources and the increasing environmental pollution has emphasized the need for better utilization of the by-products. Marine by-products contain valuable protein and lipid fractions, minerals, enzymes as well as many other components. The major fraction of by-products are used for feed production—in making fish meal/oil, but this has low profitability. However, there are many ways in which the fish and shellfish waste could be better utilized, including the production of novel food ingredients, nutraceuticals, pharmaceuticals, biomedical materials, fine chemicals, and other value-added products. In recent times, much research is conducted in order to explore the possible uses of different by-products. This contribution primarily covers the characteristics and utilization of the main ingredients such as protein, lipid, chitin and its derivatives, enzymes, carotenoids, and minerals originating from marine by-products.


2022 ◽  
Vol 14 (2) ◽  
pp. 605
Author(s):  
Meththa Ranasinghe ◽  
Ioannis Manikas ◽  
Sajid Maqsood ◽  
Constantinos Stathopoulos

Date (Phoenix dactylifera L. Arecaceae) fruits and their by-products are rich in nutrients. The health benefits of dates and their incorporation into value-added products have been widely studied. The date-processing industry faces a significant sustainability challenge as more than 10% (w/w) of the production is discarded as waste or by-products. Currently, food scientists are focusing on bakery product fortification with functional food ingredients due to the high demand for nutritious food with more convenience. Utilizing date components in value-added bakery products is a trending research area with increasing attention. Studies where the researchers tried to improve the quality of bakery goods by incorporating date components have shown positive results, with several drawbacks that need attention and further research. The objective of this review is to present a comprehensive overview of the utilization of date components in bakery products and to identify gaps in the current knowledge. This review will help focus further research in the area of valorization of date by-products and thereby contribute to the generation of novel functional bakery products that meet consumer expectations and industry standards, thus generating income for the relevant industry and considerable alleviation of the environmental burden this waste and by-products contribute to. Only a few studies have been focused on utilizing date by-products and their extracts for baked goods, while a research area still remaining under-explored is the effect of incorporation of date components on the shelf life of bakery products.


2021 ◽  
Vol 07 ◽  
Author(s):  
David E. Brune

Background: Global seafood production has doubled over the last two decades, with aquaculture now contributing nearly 50% of supply. Pressure to reduce or eliminate water and waste discharge from aquaculture increases with each passing year. In response to this pressure, producers have adopted increasingly sophisticated technology, expanding fish and shellfish production from 2,000 kg/ha to over 40,000 kg/ha. While water discharge has been drastically reduced, waste solids production from intensive aquaculture continues to pose a management challenge. One potential solution is to co-culture filter-feeding aquatic organisms with higher-value aquaculture species as a technique to harvest and covert excess bacterial and algal biomass into useful co-products and biofuels. Methods: Over a period of twenty years, the author and co-workers have designed and operated catfish and marine shrimp production systems employing co-culture of tilapia (Oreochromis niloticus) and brine shrimp (Artemia) to remove, concentrate, and convert microbial solids into animal biomass and biofertilizer. Past system operations are reviewed, and additional methods and data are presented and discussed. In the case of tilapia, a technique entitled “tilapia enhanced sedimentation” is evaluated for use in converting algae into concentrated fertilizer and fish flesh. Alternatively, brine shrimp are used to harvest and convert microbial solids into a potential fish-meal replacement. Results: Tilapia co-culture was shown to be cost-effective in controlling aquaculture system algal species and density, selectively removing cyanobacteria from culture water promoting green algal dominance, reducing off-flavor in cultured fish species. Tilapia co-culture at biomass levels from 20-25% of targeted fish carrying capacity was required to reduce algal and bacterial levels, significantly reducing oxygen demand and aeration requirements. Tilapia enhanced sedimentation was demonstrated to be effective in removing suspended algal and bacterial solids, concentrating excreted biomass into rapidly settling fecal pellets. Brine shrimp culture has been demonstrated at densities of 2,000-4,000 animals/liter, corresponding to 4 gm/liter of dry weight animal biomass concentration. Brine shrimp are capable of conversation efficiencies as high as 50% of microbial dry weigh to brine dry shrimp weight, as opposed to < 3% conversion with tilapia. However, successful Artemia culture necessitates unique culture system design and management, requiring two-stage, multiple-batch cultures of uniformly sized cohorts to yield maximum growth and conversion efficiency. Unique pH and ammonia toxicity response of brine shrimp necessitates management protocols very different from typical aquatic animal culture. Tilapia harvested algal sludge is limited to fertilizer application, yielding a value of $0.10/kg at 98% dry weight. On the other hand, brine shrimp biomass can be used as a potential fish-meal replacement at a value of $ 1.50/kg dry weight. Conclusion: Utilization of co-culture of filter-feeder organisms such as tilapia and brine shrimp to harvest, concentrate and convert algal and bacterial solids into concentrated sludge or animal biomass offers potential to provide value-added products from integrated aquaculture operations as a more environmentally friendly practice.


2017 ◽  
Vol 19 (13) ◽  
pp. 3164-3164
Author(s):  
S. Ortega-Requena ◽  
S. Rebouillat

Retraction of ‘Bigger data open innovation: potential applications of value-added products from milk and sustainable valorization of by-products from the dairy industry’ by S. Ortega-Requena et al., Green Chem., 2015, 17, 5100–5113.


2020 ◽  
Author(s):  
S. Mohan ◽  
L. Chithra ◽  
R. Nageswari ◽  
V. Manimozhi Selvi ◽  
M. Mathialagan

Sugarcane is one of the major cash crops, used for the production of sugar and ethanol. Sugarcane processing, results in many by by-products like bagasse, molasses and press mud which have economic value. Also, the by-products serve to generate many value added products. Sugarcane wax is a value added product obtained by the processing of press mud. It has pharmaceutical, agricultural and industrial applications. n-Triacontanol, Policosanol, D-003 acids and waxes are some of the products derived from the sugarcane wax. This article attempt discusses the various methods of extraction of sugarcane wax, its constituents and its characteristics and applications of the products derived from the sugarcane wax.


2019 ◽  
Vol 3 (Supplement_1) ◽  
Author(s):  
Savita Budhwar

Abstract Objectives The main aim of this study is to determine the physiochemical properties and nutritional composition of by-product of Bengal gram and to develop value added products, incorporating by-products of cereals and pulses in combination. Further in this study popularization of such acceptable product and transfer of the technology regarding their preparation and utilization is also regarded to be beneficial. Methods For the nutritional evaluation of raw ingredients, physio-chemical property and nutrient composition were checked by AOAC methods. Standardization and development of some basic value added products were also done. Functional properties and nutritional composition of developed value added products were equally checked by shelf life evaluation to choose the most acceptable consumable food products. New products were made using fermentation, supplementation and combination. Results We found that most of the by-products are rich in protein, calcium, iron and fiber. We observed that Bengal gram husk contain highest amount of crude fiber i.e., 40%. However, it also contains ash (4.2%), dietary fiber (82 g/100 gm), insoluble dietary fiber (76 g/100 gm) and total calcium (984 mg/100gm). In case of broken rice we have observed low amount of trypsin inhibitor activity (16.35 TIU/mg) and high amount of starch (75 g/100gm). In addition, we have observed anti-nutritional factors significantly in higher amounts in case of broken rice. Additionally, wheat bran was found to contain high amount of total phosphorus (988 mg/100gm), soluble dietary fiber (10 g/100gm) , total calcium ( 71 mg/100 mg) and Trypsin inhibitor activity ( 55 TIU/mg) . Combining these by-products various products were prepared using various processing techniques like fermentation, supplementation and combination. We found that newly prepared value added products have high amount of proteins, dietary fiber, available minerals, in vitro protein digestibility and higher antioxidant activity. Conclusions We suggest that novel formulated food products can be utilized as an unconventional source of nutrients and therapeutic weapon to combat diseases such as diabetes and hypertension. Utilization of such agro wastes as food products will also be useful to combat hunger, food demand and malnourished state leading to maintenance of food security. Funding Sources Science and Engineering Research Board (SERB), Department of Science and Technology, Government of India.


2017 ◽  
Vol 2 (2) ◽  
pp. 90
Author(s):  
K. R. Anilakumar ◽  
Natarajan Gopalan ◽  
R. K. Sharma

Value addition to foods may be done by several ways. It could be done by the use of preservative, food ingredients capable of eliciting functionalities and by fortification using micronutrients. There are novel and emerging food processing technologies that are possible to preserve the ingredients in the food intact. The shelf life enhancement of the processed food can be done by adapting newer packaging technologies. Food processing industries in many of the countries across the world generates huge quantity of by-products that can be put into use by value addition. These by-products have less use and create considerable environmental pollution. The by-products of the fruits, vegetables, etc. may be used for value addition adapting commercially viable approaches. Fermented foods are value added foods that could be developed using novel starters. It is also important to note the regulatory aspects of foods whenever the foods are preserved b y value addition


Sign in / Sign up

Export Citation Format

Share Document