scholarly journals Developing Engineering Identity in an Introductory Engineering Course: A Multi-Case Analysis

2021 ◽  
Vol 4 (3) ◽  
pp. 153-177
Author(s):  
Christine Allison Gray ◽  
Ron E. Gray ◽  
Martha M. Canipe ◽  
Shadow W. J. Armfield ◽  
Robin Tuchscherer

Research in engineering education has identified several factors relevant to the development of students’ identity as engineers. Here we examine the engineering identity of undergraduate engineering students after an introductory engineering course. The specific research question explored here is: "How do engineering students in an introductory engineering course interpret competence, performance, and recognition in relation to their identities as engineers?” We used a modified engineering identity framework to explore the development of engineering identity within the undergraduate engineering context through a multiple case study approach. Six students majoring in engineering participated in the study. The students had divergent perspectives on what it meant to be competent as an engineer. In all cases, students connected both competence and performance as an engineer with persistence. At this introductory stage, self-recognition as an engineering person took center stage for each student. All were able to identify themselves strongly as an engineering person. The findings add to the current understandings about the development of engineering identity, and suggest that engineering identity may be critically important in conversations about the steps faculty may take in working with students to promote increased retention of undergraduate students in engineering.

2015 ◽  
Vol 6 (2) ◽  
pp. 85-98 ◽  
Author(s):  
Patricia A Ralston ◽  
Cathy L Bays

Critical thinking is considered a necessary learning outcome for all college students and essential for academic and career success.  There are many challenges to developing a comprehensive approach to teaching and assessing critical thinking skills. Although the literature has many examples of the incorporation of critical thinking and assessment into courses, longitudinal studies following engineering students through their undergraduate career are lacking.  This study assessed the impact of using the Paul-Elder Critical Thinking Framework to enhance undergraduate students’ critical thinking skills with the hypothesis: There will be a significant increase in undergraduate students’ critical thinking abilities from the freshman to the senior year with the explicit and strategic incorporation of critical thinking assignments. The research question was, “How do the critical thinking skills of undergraduate engineering students change as they progress through the engineering program with the explicit and strategic incorporation of critical thinking assignments?” The study was a descriptive, longitudinal study of three engineering student cohorts as they progressed through the four year undergraduate program. The study was approved by the university’s Institutional Review Board. There was a statistically significant increase in critical thinking scores over the four years for each of the three cohorts. Integrating and evaluating critical thinking assignments into engineering curricula is possible, but a major challenge to critical thinking assessment using a holistic rubric is training engineering faculty in their use.  The results are encouraging, and participating faculty agree; but sustaining these efforts to imbed critical thinking assignments throughout the engineering college curriculum will require effort and administrative support.


2021 ◽  
pp. 095042222110308
Author(s):  
Teik Aun Wong ◽  
Wei Chieh Cheah

This study examines the practice, outcomes and challenges of a “triple-blend” approach which combines the components of classroom instruction, online facilitation and external exposure. Examining this pedagogical approach provides guidance for improving the delivery of teaching and learning. The study takes a multiple case study approach, employing action research methodology. The authors are practicing lecturers and the five cases, drawn from a private institution of higher education in Penang, Malaysia, have an average of 13.8 students, comprise undergraduate and postgraduate classes, and cover business, social science and humanities disciplines. Quantitative and qualitative comparisons are made between student cohorts. Students’ behavior and performance are tracked using an online learning management system. The findings reveal that the deployment of the triple-blend approach on aggregate produces positive outcomes in terms of student engagement and performance. However, there are instances of negative outcomes, suggesting that other factors are at play apart from the choice of pedagogical approach. Discussion of the challenges in deploying this approach shows that the process is far from homogenous. Nonetheless, the overall perspective indicates a positive relationship between the triple-blend approach and positive teaching and learning outcomes. This study provides guidance for teachers on deployment challenges and best practices.


Author(s):  
Nael Barakat ◽  
Heidi Jiao

Increasing demand on workforce for nanotechnology implementation has resulted in an exponential increase of demand on educational material and methods to qualify this workforce. However, nanotechnology is a field that integrates many areas of science and engineering requiring a significant amount of background knowledge in both theory and application to build upon. This challenge is significantly magnified when trying to teach nanotechnology concepts and applications at the undergraduate engineering level. A considerable amount of time is needed for an undergraduate engineering student to be able to design and build a useful device applying nanotechnology concepts, within one course time. This paper presents an actual experience in teaching hands-on applications in nanotechnology to undergraduate engineering students through an optimized model, within a normal course time. The model significantly reduces the time needed by undergraduate students to learn the necessary manufacturing techniques and apply them to produce useful products at the micro and nano levels, by ensuring that infrastructure and legwork related to the educational process are partially completed and verified, before the course starts. The model also provides improved outcomes as all its pre-course work is also tested with students working under different arrangements of professors’ supervision. The result is an optimized infrastructure setup for micro and nanotechnology design and manufacturing education, built with students in mind, to be completed within the frame of one semester course. The model was implemented at GVSU-SOE as the core hands-on part of a senior undergraduate course titled (EGR 457 nano/micro systems engineering). Students in the course were able to go through the design and build steps of different MEMS and NEMS products, while learning and utilizing cleanroom equipment and procedures. This was based on infrastructural arrangements by students preceding this class by a semester and working closely with the professors. Assessment was conducted on both sides of the model and results were collected for evaluation and improvement of the model.


Author(s):  
Richard B. Mindek ◽  
Joseph M. Guerrera

Educating engineering students in the appropriate methods for analyzing and problem solving fundamental manufacturing processes is a challenge in undergraduate engineering education, given the increasingly limited room in the curriculum as well as the limited time and resources. Although junior and senior level laboratory courses have traditionally been used as a pedagogical platform for conveying this type of knowledge to undergraduate students, the broad range of manufacturing topics that can be covered along with the limited time within a laboratory course structure has sometimes limited the effectiveness of this approach. At the same time, some undergraduate students require a much deeper knowledge of certain manufacturing topics, practices or research techniques, especially those who may already be working in a manufacturing environment as part of a summer internship or part-time employment. The current work shows how modeling, actual machining tests and problem solving techniques were recently used to analyze a manufacturing process within a senior design project course. Specifically, an Instantaneous Rigid Force Model, originally put forward by Tlusty (1,2) was validated and used to assess cutting forces and the ability to detect tool defects during milling operations. Results from the tests showed that the model accurately predicts cutting forces during milling, but have some variation due to cutter vibration and deflection, which were not considered in the model. It was also confirmed that a defect as small as 0.050 inches by 0.025 inches was consistently detectable at multiple test conditions for a 0.5-inch diameter, 4-flute helical end mill. Based on the results, it is suggested that a force cutting model that includes the effect of cutter vibration be used in future work. The results presented demonstrate a level of knowledge in milling operations analysis beyond what can typically be taught in most undergraduate engineering laboratory courses.


Author(s):  
Jeong-Hoi Koo ◽  
Fernando Goncalves ◽  
Hong Zhang

The primary objective of this paper is to bridge the theory of tuned vibration absorbers (TVA) with the practice of implementing TVAs in systems. Often, the practice of implementing TVAs in systems is a far departure from the theory expressed in many textbooks. These departures are often required in practice to account for the less than ideal conditions that the TVAs will be operating under. Many retrofitted TVAs use “smart” or active materials along with various control techniques to improve the performance of the traditional TVA proposed in textbooks. The intent of the current paper is to demonstrate several of these modern methods of implementing retrofitted TVAs to undergraduate students. The first author introduced the methods in a junior level vibrations course, and is developing a laboratory experiment. Teaching these advanced TVAs to undergraduate engineering students will help them understand how theories learned in class are used in real world problems, and motivate them to explore new fields of research. After introducing a “textbook” vibration absorber theory, this paper describes principles and operations of a new class of vibration absorbers. In reviewing conventional TVAs, students are introduced to many of the engineering challenges encountered in the implementation of TVAs. One such challenge is inevitable off-tuning caused by system parameter changes with time. After identifying many of the challenges associated with the implementation of TVAs, the students are introduced to many modern solutions to these problems. Many of these solutions involve the use of smart materials, such as piezoceramics, magnetorheological fluids, magnetorheological elastomers, shape memory alloys, etc. Through this experience, students are introduced to many smart materials and have the opportunity to see how these smart materials can provide solutions to many engineering challenges and improve existing technologies.


2016 ◽  
Vol 4 (1) ◽  
Author(s):  
Angela R. Bielefeldt ◽  
Nathan E. Canney

This study explored the aspirations of undergraduate engineering students in regard to helping others, examining potential differences between disciplines and institutions. Over 1900 undergraduate students from 17 U.S. universities responded to a survey in spring 2014. In open-ended responses, 15.5% of the students included some form of helping people and/or the world as one of the factors that motivated them to select their engineering major; for 6.7% of the students this was the primary or only motivating factor listed. Helping as a motivation was not equally prevalent among different engineering disciplines, being much more common among students majoring in biomedical, environmental, materials, and civil and less common in computer and aerospace. Different disciplines also varied in the priority for helping people relative to other future job factors - highest in chemical/biological, moderate in civil and related majors, and lowest among electrical/computer and mechanical. Institutional differences were found in the extent to which students indicated an importance that their career would help people and the extent to which an ability to help others was a central message in their major. The results indicate the percentages of engineering students who are most likely to embrace humanitarian engineering; fostering these aspirations in students could help with attraction and retention.


Author(s):  
Matt Wright ◽  
Chris Campbell ◽  
Susan Nesbit ◽  
Thomas Froese ◽  
Steve Wilton

This paper outlines a survey validation process and presents preliminary findings from a study of Civil and Electrical and Computer engineering graduate perspectives on their program with respect to the Canadian Engineering Accreditation Board (CEAB) Engineering Graduate Attributes. The study’s research question was: What breadth and depth of knowledge, as specified by the Engineering Graduate Attributes, do undergraduate engineering students perceive they have achieved? This research is part of a larger research agenda in these departments in UBC engineering to collect data for the ongoing processes of curriculum improvement and CEAB accreditation. While the Civil and Electrical and Computer Engineering departments at UBC collaborated in this study, different survey instruments were produced for each context. This paper focuses primarily on the Civil Engineering Graduate Attributes Survey Tool.


2020 ◽  
Vol 15 (1) ◽  
pp. 238-241
Author(s):  
Kimberly MacKenzie

A Review of: Phillips, M., Fosmire, M., Turner, L., Petersheim, K., & Lu, J. (2019). Comparing the information needs and experiences of undergraduate students and practicing engineers. The Journal of Academic Librarianship, 45(1), 39-49. https://doi.org/10.1016/j.acalib.2018.12.004 Abstract Objective – To compare the levels of information literacy, needs, and challenges of undergraduate engineering students with those of practising engineers. Design – Electronic survey. Setting – Large land grant university in the Midwestern United States and multiple locations of a global construction machinery manufacturing company (locations in Asia Pacific, Europe, North America). Subjects – Engineering undergraduates and full-time engineers. Methods – Two voluntary online surveys distributed to (a) students in two undergraduate engineering technology classes and one mechanical engineering class; and (b) to engineers in an online newsletter. None of the questions on the survey were mandatory. Because the call for practising engineers generated a low response rate, direct invitations were sent in batches of 100 to randomly selected engineers from a list provided by the human resources department of the company participating in the study. The surveys were similar but not identical and included multiple choice, Likert scale, and short answer questions. Data analysis included two-sided unpaired sample t-tests (quantitative data) and deductive and inductive content analysis (qualitative data). Main Results – There were 63 students and 134 professional engineers among the respondents. Survey response rates were relatively low (24.3% for students; approximately 4.5% for employees). Students rated themselves higher overall and significantly higher than did engineers on the questions “know where to look for information” (students M = 5.3; engineers M = 4.2) and “identifying the most needed information” (students M = 5.5; engineers M = 4.8) (mean values reported on a 7-point scale). Neither group rated themselves highly on “reflecting on how to improve their performance next time” or “having a highly effective structure for organizing information,” though engineers in North America rated themselves significantly higher than those in Asia Pacific on organizing information, knowing where to look for information, and using information to make decisions. Both students and engineers reported often using Google to find information. The library was mentioned by one-half of engineers and one-third of students. Engineers reported consulting with peers for information and making more use of propriety information from within their companies, while students reported using YouTube videos and online forums, as well as news and social media. More than half of students (57%) reported having enough access to information resources, while 67% of engineers felt that they lacked sufficient access. The most common frustration for both groups was locating the information (45% of student responses; 71% of engineer responses). Students reported more frustration with evaluating information (17%) compared to engineers (9%). Conclusion – Engineering students and professional engineers report differences in their levels of confidence in finding information and differences in the complexity of the information landscape. Engineering librarians at the university level can incorporate this knowledge into information literacy courses to help prepare undergraduates for industry. Corporate librarians can use this information to improve methods to support the needs of engineers at all levels of employment.


2013 ◽  
Vol 37 (2) ◽  
pp. 176-183 ◽  
Author(s):  
Regina K. Nelson ◽  
Naomi C. Chesler ◽  
Kevin T. Strang

Physiology is a core requirement in the undergraduate biomedical engineering curriculum. In one or two introductory physiology courses, engineering students must learn physiology sufficiently to support learning in their subsequent engineering courses and careers. As preparation for future learning, physiology instruction centered on concepts may help engineering students to further develop their physiology and biomedical engineering knowledge. Following the Backward Design instructional model, a series of seven concept-based lessons was developed for undergraduate engineering students. These online lessons were created as prerequisite physiology training to prepare students to engage in a collaborative engineering challenge activity. This work is presented as an example of how to convert standard, organ system-based physiology content into concept-based content lessons.


Author(s):  
William J. Schell

Through the efforts of government and industry, there is growing recognition among academics of the importance of developing leadership skills in engineering students. Despite this recognition and the increasing level of resource put into engineering leadership programs throughout North America, there is currently little work that illustrates how leadership fits into the broader picture of the heterogeneous nature of engineering work. This work seeks to begin closing that gap by investigating the relationship between models of engineering identity and leadership identity. The investigation is done using quantitative techniques to draw conclusions from two data sets taken from national surveys of undergraduate students in the U.S.. Initial results indicate that while engineering students are engaged in leadership positions more frequently than their peers inother fields (other STEM and non-STEM) they see less of a connection between these roles and their future careers than other students, indicating a potential conflict between an engineering identity and a leadership identity.


Sign in / Sign up

Export Citation Format

Share Document