scholarly journals Isotropic Points on Glaciers

1986 ◽  
Vol 32 (112) ◽  
pp. 363-365 ◽  
Author(s):  
J. F. Nye
Keyword(s):  
Strain Rate ◽  
Pattern Classification ◽  
Transverse Direction ◽  
Transverse Velocity ◽  
Longitudinal Direction ◽  
Stationary Points ◽  
Star Pattern ◽  
Isotropic Point ◽  
Made In

AbstractTwo isotropic points measured by Meier and others (1985) on Columbia Glacier, Alaska, are examined. The pattern classification of the upper one is on the borderline between monstar and lemon, and this is traced to the fact that the variation of strain-rate in the longitudinal direction is approximately equal to that in the transverse direction, contrary to the assumption made in Nye (1983). The conditions for the lower isotropic point to have the star pattern, as observed, are believed to be typical for a glacier that ends in an ice cliff, like this one, which calves icebergs. Where, as in this case, there is only a small transverse velocity, the isotropic points on a glacier must nearly coincide with stationary points for the speed, and these are almost always either maxima or saddles, alternating. The maxima correspond to lemon or monstar patterns, and the saddles to star patterns.

scholarly journals Isotropic Points on Glaciers

1986 ◽  
Vol 32 (112) ◽  
pp. 363-365 ◽  
Author(s):  
J. F. Nye
Keyword(s):  
Strain Rate ◽  
Pattern Classification ◽  
Transverse Direction ◽  
Transverse Velocity ◽  
Longitudinal Direction ◽  
Stationary Points ◽  
Star Pattern ◽  
Isotropic Point ◽  
Made In

AbstractTwo isotropic points measured by Meier and others (1985) on Columbia Glacier, Alaska, are examined. The pattern classification of the upper one is on the borderline between monstar and lemon, and this is traced to the fact that the variation of strain-rate in the longitudinal direction is approximately equal to that in the transverse direction, contrary to the assumption made in Nye (1983). The conditions for the lower isotropic point to have the star pattern, as observed, are believed to be typical for a glacier that ends in an ice cliff, like this one, which calves icebergs. Where, as in this case, there is only a small transverse velocity, the isotropic points on a glacier must nearly coincide with stationary points for the speed, and these are almost always either maxima or saddles, alternating. The maxima correspond to lemon or monstar patterns, and the saddles to star patterns.

ASPECTS IN BUILDING A COMPANY WEB-SITE AND ITS ROLE FOR THE DEVELOPMENT OF BUSINESS

2018 ◽  
pp. 117-124
Author(s):  
Petar Halachev ◽  
Victoria Radeva ◽  
Albena Nikiforova ◽  
Miglena Veneva
Keyword(s):  
Life Cycle ◽  
Web Site ◽  
The Internet ◽  
A Company ◽  
The Web ◽  
Design Construction ◽  
Made In ◽  
Site Types

This report is dedicated to the role of the web site as an important tool for presenting business on the Internet. Classification of site types has been made in terms of their application in the business and the types of structures in their construction. The Models of the Life Cycle for designing business websites are analyzed and are outlined their strengths and weaknesses. The stages in the design, construction, commissioning, and maintenance of a business website are distinguished and the activities and requirements of each stage are specified.

Vegetation on technogenic habitats in the far-north taiga and south forest-tundra of the European North-East of Russia. Alliance Chamerio angustifolii–Matricarion hookeri A. Ishbirdin et al. 1996

2019 ◽  
pp. 77-94
Author(s):  
I. A. Likhanova ◽  
G. S. Shushpannikova ◽  
L. P. Turubanova
Keyword(s):  
Komi Republic ◽  
Oil Fields ◽  
Soil Enrichment ◽  
Far North ◽  
North East ◽  
European North ◽  
Ecological Scales ◽  
Floristic Classification ◽  
Made In

The results of floristic classification of technogenic vegetation (alliance Chamerio angustifolii–Matricarion hookeri A. Ishbirdin et al. 1996, order Chamerio–Betuletalia nanae Khusainov et al. in Sumina 2012, class Matricario–Poetea arcticae A. Ishbirdin in Sumina 2012) conducted by the Braun-Blanquet method (Braun-Blanquet, 1964; Mirkin, Naumova, 1998) are given. 98 geobotanical relevés, made in 1981–2013 on areas of oil fields and suburbs of the Usinsk city (Komi Republic) (56–60о N, 67–66о E), were involved into analysis (Fig. 1). The ecological parameters like moisture (F) and mineral nitrogen soil enrichment (N) were assessed using the Ellenberg ecological scales (Ellenberg, 1974).

AISI 1141

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Carbon Steel ◽  
Transverse Direction ◽  
Longitudinal Direction ◽  
Heat Treating ◽  
Automatic Machine ◽  
Steel Mills ◽  
Light Duty ◽  
High Production ◽  
Ball Joints ◽  
Machining Characteristics

Abstract AISI 1141 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.08-0.13% sulfur to give it free-machining characteristics. It has relatively low hardenability. Its ductility and toughness are fairly good in the longitudinal direction but tend to be low in the transverse direction. It is highly recommended for high-production automatic-machine products. Among its many uses are screws, bolts, ball joints, spindles and light-duty gears. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-93. Producer or source: Carbon steel mills.

A topological approach to the strain-rate pattern of ice sheets

1993 ◽  
Vol 39 (131) ◽  
pp. 10-14 ◽  
Author(s):  
J. F. Nye
Keyword(s):  
Strain Rate ◽  
Ice Sheets ◽  
Ice Sheet ◽  
Point Of View ◽  
Principal Strain ◽  
Topological Approach ◽  
Contour Maps ◽  
Isotropic Point ◽  
Horizontal Strain

AbstractThe pattern of horizontal strain rate in an ice sheet is discussed from a topological point of view. In a circularly symmetric ice sheet, the isotropic point for strain rate at its centre is degenerate and structurally unstable. On perturbation the degenerate point splits into two elementary isotropic points, each of which has the lemon pattern for the trajectories of principal strain rate. Contour maps of principal strain-rate values are presented which show the details of the splitting.

Quality Assessment of Weldable Steel Mark P355NH from Decompression Chamber Construction for Diving

2012 ◽  
Vol 217-219 ◽  
pp. 2381-2387
Author(s):  
Doru Romulus Pascu ◽  
Radu Alexandru Roşu ◽  
Iuliana Duma ◽  
Horia Daşcău
Keyword(s):  
Test Temperature ◽  
Transverse Direction ◽  
Mechanical Characteristics ◽  
Longitudinal Direction ◽  
Pressure Vessels ◽  
Fine Grained ◽  
Weldable Steel ◽  
Breaking Energy ◽  
Fine Grained Steels ◽  
Selection Of

Non-alloyed P355NH steel according to EN 10028-3:2003 belongs to a group of fine-grained steels for pressure vessels being used in welded construction at decompression chamber for divers. Values of the chemical, structural and mechanical characteristics and steel toughness experimentally determined fit the analyzed steel in P355NH steel group according to EN 10028-3:2003. The toughness of the analyzed steel at the test temperature of -30°C is characterized by high values of fracture energy KV in longitudinal direction between 48 and 86 J and on transverse direction between 17 and 34J. Steel toughness at the test temperature of -30°C required by ABS standard (in Section 4/5.3 and Table 1) provides for breaking energy KV of min. 35J, with ductile fracture surfaces, value that is not respected at some lots of the three batches (A, B, C) of steel. Finally, based on the direct correlation established between HV10 hardness of the fine structure and the toughness it was made a selection of the lots of non-alloy steel P355NH which correspond to ABS norm for welded construction of the decompression chamber for divers

Sign in / Sign up

Export Citation Format

Share Document