scholarly journals Numerical study of semi-elliptical cracks in the critical position of pipe elbow

2019 ◽  
Vol 13 (49) ◽  
pp. 463-477 ◽  
Author(s):  
Bassam Muthanna ◽  
Omar Bouledroua ◽  
Madjid Meriem-Benziane ◽  
Mohammed Hadj-Meliani ◽  
Guy Pluvinage ◽  
...  
2021 ◽  
Vol 26 (3) ◽  
pp. 198-207
Author(s):  
T.A. Zitouni ◽  
Z. Labed

Abstract The through-thickness crack or surface crack in PE100 pipes subjected to internal pressure represents a serious risk to the structural integrity of HDPE pipes, which has attracted wide attention in modern industry. Although experimental research offers reliable predictions of surface crack influence on pipes, the relatively high cost hinders its application. The numerical simulation, as a cost-effective alternative, has been widely applied to assess stress displacement and strain to the entire pipe structure. This is the initial approach adopted in recent decades. This article provides simulations tests of an uncracked pipe and cracked PE100 pipe under different internal pressure values, with varying each time the dimensions of the crack with 1 mm rate for minor and major radius and 0.5mm rates for the largest contour radius, using ANSYS MECHANICAL STRUCTURAL STATIC for simulation.


1998 ◽  
Vol 77 (2) ◽  
pp. 473-484 ◽  
Author(s):  
M. Sampoli, P. Benassi, R. Dell'Anna,

2020 ◽  
pp. 57-65
Author(s):  
Eusébio Conceiçã ◽  
João Gomes ◽  
Maria Manuela Lúcio ◽  
Jorge Raposo ◽  
Domingos Xavier Viegas ◽  
...  

This paper refers to a numerical study of the hypo-thermal behaviour of a pine tree in a forest fire environment. The pine tree thermal response numerical model is based on energy balance integral equations for the tree elements and mass balance integral equation for the water in the tree. The simulation performed considers the heat conduction through the tree elements, heat exchanges by convection between the external tree surfaces and the environment, heat exchanges by radiation between the flame and the external tree surfaces and water heat loss by evaporation from the tree to the environment. The virtual three-dimensional tree model has a height of 7.5 m and is constituted by 8863 cylindrical elements representative of its trunks, branches and leaves. The fire front has 10 m long and a 2 m high. The study was conducted taking into account that the pine tree is located 5, 10 or 15 m from the fire front. For these three analyzed distances, the numerical results obtained regarding to the distribution of the view factors, mean radiant temperature and surface temperatures of the pine tree are presented. As main conclusion, it can be stated that the values of the view factor, MRT and surface temperatures of the pine tree decrease with increasing distance from the pine tree in front of fire.


2013 ◽  
Author(s):  
Pancheewa Benjamasutin ◽  
◽  
Ponthong Rijana ◽  
Phongchayont Srisuwan ◽  
Aussadavut Dumrongsiri

2013 ◽  
Author(s):  
Artchapong Hassametto ◽  
Preerawadee Chaiboontun ◽  
Chattraporn Prajuabwan ◽  
Laphatrada Khammuang ◽  
Aussadavut Dumrongsiri

Sign in / Sign up

Export Citation Format

Share Document