scholarly journals Design and Analysis of 64 GHz Millimetre Wave Microstrip Patch Antenna

2021 ◽  
Author(s):  
Swagata Sarkar ◽  
Sivakami Nagappan ◽  
Shafin Kadhir Badhusha
Keyword(s):  
Patch Antenna ◽  
Absorption Rate ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Modern World ◽  
Millimetre Wave ◽  
Security Screening ◽  
Radio Frequency Energy ◽  
Microstrip Patch ◽  
Automotive Radars

Millimetre Wave frequencies (30–300 GHz) can be used for different major applications of modern world like telecommunications, security screening, imaging, automotive radars, military applications, remote sensing, radio astronomy and many more. The internationally reserved frequency spectrum is used for Radio Frequency Energy. In this work 64 GHz antennas are compared with different design and a comparative study is taken. In this work Microstrip patch antenna with carpet architecture, and fractal island are designed and compared. The general comparative parameters for antenna are directivity, gain, return loss, bandwidth, specific absorption rate etc. After the comparison, it is found that return loss gave better result for carpet design at 64 GHz compare to fractal island design.

Metamaterial Structure with Negative μ and ε for reduction of return loss of Microstrip Patch Antenna

2012 ◽  
Vol 2 (8) ◽  
pp. 130-133
Author(s):  
Amandeep Singh Amandeep Singh ◽  
◽  
Sankul Agarwal ◽  
Vaibhav Sharma ◽  
Shivam Pandita
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Metamaterial Structure ◽  
Microstrip Patch

scholarly journals Design of a Single Band Microstrip Patch Antenna for 5G Applications

2018 ◽  
Vol 7 (2.7) ◽  
pp. 532 ◽  
Author(s):  
R Siri Chandana ◽  
P Sai Deepthi ◽  
D Sriram Teja ◽  
N Veera JayaKrishna ◽  
M Sujatha
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Return Loss ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Single Band ◽  
Wave Frequency ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Simulation Purpose

This article is about a single band microstrip patch antenna used for the 5G applications. And this antenna is suitable for the millimeter wave frequency. The patch antenna design consists of 2 E shaped slots and 1 H shaped slot. These slots are loaded on the radiating patch with the 50 ohms microstrip feed line. For the simulation purpose, Rogers’s RT5880 dielectric substrate with relative permittivity of 2.2 and loss tangent of 0.0009 is used. The design and simulation of the antenna is done using HFSS (High Frequency Structure Simulator) software. The results are simulated for the parameters Return loss, VSWR, 3D Radiation pattern. The proposed antenna has a return loss of -42.4383 at 59 GHz millimeter wave frequency. 

scholarly journals A Novel Frequency Reconfigurable Microstrip Patch Antenna using Pin Diode

2020 ◽  
Vol 9 (5) ◽  
pp. 2013-2017
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Pin Diode ◽  
Optimum Level ◽  
Frequency Range ◽  
Microstrip Patch ◽  
Single Antenna ◽  
Specific Frequency ◽  
Switching State

In recent study, in the growth of wireless technology single antenna that works with a specific frequency is becoming outdated. The antenna which is capable to work dynamically is encouraged. To make an antenna to work dynamically, modification in any of the antenna characteristics can be applied. In this proposed work, the antenna which can reconfigure its frequency is designed and analyzed. Microstrip patch antenna is most popular printed type antenna which is suitable for diverse applications. The antenna design consists of three PIN diodes which are placed in different positions on the patch. Depending upon the switching state of PIN diode the antenna can operate in different frequency ranges. The frequency range obtained ranges from 1.38 GHz to 3.24 GHz. Return loss value, VSWR obtained is of optimum level. The various gain of antenna is obtained in simulation. The analysis of the antenna is done in ANSYS HFSS software.

scholarly journals Omnidirectional Microstrip Patch Antenna for 2.4 GHz Wireless Communications

2021 ◽  
Vol 2114 (1) ◽  
pp. 012051
Author(s):  
Alaa M. Abdulhussein ◽  
Ali H. Khidhi ◽  
Ahmed A. Naser
Keyword(s):  
Computer Simulation ◽  
Wireless Communications ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Wireless Communication Systems ◽  
Microstrip Patch ◽  
Operating Bandwidth

Abstract Antenna studies on various wireless communication systems have been carried out by many academics. In this research, the omnidirectional microstrip patch antenna (MPA) is proposed, manufactured, and tested. The operating bandwidth of the antenna is quite suitable for the different applications. The proposed antenna fabricated on the flame retardant (FR-4) substrate with a volume of 75.85 × 57.23 × 1.59 mm3. Computer simulation technology (CST) studio used to design and simulate. Experimental results show that the return loss (RL), bandwidth (BW), voltage standing wave ratio (VSWR) and input impedance (Zin ) are -25.26 dB, 61 MHz, 1.12 and 54.46 Ω, respectively. The antenna operates at 2.42 GHz (from 2.39 to 2.45 GHz), which has good performance in the Wi-Fi, Bluetooth, and ZigBee communications.

scholarly journals Gain Enhancement of Microstrip Antenna using Ebg Structure for Wi-Fi Application

2019 ◽  
Vol 9 (1) ◽  
pp. 1213-1217
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Single Frequency ◽  
Total Size ◽  
Compact Structure ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Low Profile

A microstrip patch antenna is low profile antenna mounted over a high impedance electromagnetic bandgap (EBG) substrate is proposed. In this paper, Microstrip patch antenna with rectangular EBG structure is proposed and studied. The proposed antenna has compact structure with a total size of 29.44x38.036mm2 . The designed antenna resonates at Particular Single frequency with improved return loss, VSWR and gain. The resonant frequency of the antenna 2.4GHz without and with EBG and improved return loss of -17.61dB and -18.30dB. With rectangular EBG the antenna gives improved gain of 2.09 dB. The Proposed antenna is simulated by using Simulation software ie.(IE3D) and simulated results are in good with practical antenna characteristics.

Ultra-Wide Band Microstrip Patch Antenna for Millimetre-Wave Band Applications

2021 ◽  
pp. 491-496
Author(s):  
Aditi Chauhan ◽  
Utkarsh Jain ◽  
Aakash Warke ◽  
Manan Gupta ◽  
Ashok Kumar ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Wide Band ◽  
Microstrip Patch Antenna ◽  
Ultra Wide Band ◽  
Wave Band ◽  
Millimetre Wave ◽  
Microstrip Patch

UWB RECTANGULAR SLOTTED MICROSTRIP PATCH ANTENNA IN PROXIMITY OF HUMAN ARM MODEL

2016 ◽  
Vol 78 (5-4) ◽  
Author(s):  
Muhammad Syafiq Noor Azizi ◽  
Azahari Salleh ◽  
Adib Othman ◽  
Najmiah Radiah Mohamad ◽  
Nor Azlan Aris ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Free Space ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Ultra Wideband ◽  
Uwb Antenna ◽  
Study Behavior ◽  
Microstrip Patch ◽  
Human Arm

In this paper, we study behavior of Ultra wideband antenna which is Rectangular Slotted Microstrip Patch Antenna. Then, the antenna operated in proximity of human arm model. Furthermore, the antenna is designed on a FR-4 substrate with dielectric constant of 4.3 and thickness 1.6 mm. This antenna simulated in CST Microwave Studio software. In order to test the antenna, an arm model was numerically modelled. The study shows properties and performances of antenna when it is placed in three situations which in free space, outside and inside of human arm model. The properties of UWB antenna in term of return loss, gain, directivity and radiation pattern in the three situations is simulated and discussed.

Dual-Band Proximity Coupled Feed Microstrip Patch Antenna with ‘T’ Slot on the Radiating Patch and ‘Dumbbell’ Shaped Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 435 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents Dual-Band proximity coupled feed rectangular Microstrip patch antenna with slots on the radiating patch and Defected Ground Structure. Initially a simple proximity coupled feed rectangular Microstrip patch antenna resonating at 2.4 GHz is designed. Etching out a ‘Dumbbell’ shaped defect from the ground plane and ‘T’ shaped slot from the radiating patch of the proximity coupled feed rectangular Microstrip patch antenna, results in a Dual-Band operation, i.e., resonating at 2.4 GHz and 4.5 GHz; with 30.3 % and 18.8% reduction in the overall area of the patch and the ground plane of the reference antenna respectively. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 123.6 MHz and C-band at frequency of 4.5 GHz with bandwidth of 200 MHz, and a very good return loss of -22.1818 dB and -19.0839 dB at resonant frequency of 2.4 GHz and 4.5 GHz respectively is obtained. The proposed antenna is useful for different wireless applications in the S-band and C-band.</p>

Sign in / Sign up

Export Citation Format

Share Document