scholarly journals Control of active suspension system using H∞ and adaptive robust controls

2015 ◽  
Vol 18 (1) ◽  
pp. 5-13
Author(s):  
Trong Hieu Bui ◽  
Quoc Toan Truong
Keyword(s):  
Robust Control ◽  
Control Method ◽  
Active Suspension ◽  
Suspension System ◽  
Adaptive Robust Control ◽  
Quarter Car Model ◽  
Road Disturbance ◽  
Time Domains ◽  
Suspension Dynamics ◽  
Two Degree Of Freedom

This paper presents a control of active suspension system for quarter-car model with two-degree-of-freedom using H∞ and nonlinear adaptive robust control method. Suspension dynamics is linear and treated by H∞ method which guarantees the robustness of closed loop system under the presence of uncertainties and minimizes the effect of road disturbance to system. An Adaptive Robust Control (ARC) technique is used to design a force controller such that it is robust against actuator uncertainties. Simulation results are given for both frequency and time domains to verify the effectiveness of the designed controllers.

Development of Active Suspension System for a Pot Hole Using PID Controller

2011 ◽  
Vol 308-310 ◽  
pp. 2266-2270
Author(s):  
Mouleeswaran Senthilkumar
Keyword(s):  
Pid Controller ◽  
Ride Comfort ◽  
Control Method ◽  
Controller Design ◽  
Active Suspension ◽  
Suspension System ◽  
Operating Conditions ◽  
Hydraulic Actuator ◽  
Time Domains ◽  
Spool Valve

This paper describes the development of a controller design for the active control of suspension system, which improves the inherent tradeoff among ride comfort, suspension travel and road-holding ability. The developed design allows the suspension system to behave differently in different operating conditions, without compromising on road-holding ability. The effectiveness of this control method has been explained by data from time domains. Proportional-Integral-Derivative (PID) controller including hydraulic dynamics has been developed. The displacement of hydraulic actuator and spool valve is also considered. The Ziegler – Nichols tuning rules are used to determine proportional gain, reset rate and derivative time of PID controller. Simulink diagram of active suspension system is developed and analysed using MATLAB software. The investigations on the performance of the developed active suspension system are demonstrated through comparative simulations in this paper.

A sliding Mode Control of Active Suspension Using H2/GH2 Approach to Surface Design

2014 ◽  
Vol 945-949 ◽  
pp. 1305-1308
Author(s):  
Shu Bo Liu ◽  
Xian Xi Luo ◽  
Zhi Hui Wan
Keyword(s):  
Sliding Mode Control ◽  
Control Method ◽  
Sliding Mode ◽  
Active Suspension ◽  
Suspension System ◽  
Surface Design ◽  
Quarter Car Model ◽  
Mode Control ◽  
System A ◽  
Passive Suspension System

This paper considers a new H2/GH2sliding mode control in controlling active suspension system subject to mismatched disturbance, without requiring a prior knowledge of disturbance. A quarter-car model is used in the study and the performance of the controller is compared with the existing passive suspension system. A simulation study is presented to prove the effectiveness and robustness of the proposed control method.

The Simulation Analysis of Semi-Active Suspension System in Vehicle Based on Sliding Mode Control with Varying Structure

2011 ◽  
Vol 216 ◽  
pp. 96-100
Author(s):  
Jing Jun Zhang ◽  
Wei Sha Han ◽  
Li Ya Cao ◽  
Rui Zhen Gao
Keyword(s):  
Control Method ◽  
Simulation Analysis ◽  
Reference Model ◽  
Sliding Mode ◽  
Tracking Error ◽  
Active Suspension ◽  
Suspension System ◽  
Sliding Mode Controller ◽  
Error Dynamics ◽  
Dynamic Quality

A sliding mode controller for semi-active suspension system of a quarter car is designed with sliding model varying structure control method. This controller chooses Skyhook as a reference model, and to force the tracking error dynamics between the reference model and the plant in an asymptotically stable sliding mode. An equal near rate is used to improve the dynamic quality of sliding mode motion. Simulation result shows that the stability of performance of the sliding-mode controller can effectively improve the driving smoothness and safety.

scholarly journals Online Adaptive Optimal Control of Vehicle Active Suspension Systems Using Single-Network Approximate Dynamic Programming

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Zhi-Jun Fu ◽  
Bin Li ◽  
Xiao-Bin Ning ◽  
Wei-Dong Xie
Keyword(s):  
Optimal Control ◽  
Dynamic Programming ◽  
Approximate Dynamic Programming ◽  
Control Method ◽  
Active Suspension ◽  
Suspension System ◽  
Lyapunov Theory ◽  
Adaptive Optimal Control ◽  
Suspension Systems ◽  
Optimal Control Method

In view of the performance requirements (e.g., ride comfort, road holding, and suspension space limitation) for vehicle suspension systems, this paper proposes an adaptive optimal control method for quarter-car active suspension system by using the approximate dynamic programming approach (ADP). Online optimal control law is obtained by using a single adaptive critic NN to approximate the solution of the Hamilton-Jacobi-Bellman (HJB) equation. Stability of the closed-loop system is proved by Lyapunov theory. Compared with the classic linear quadratic regulator (LQR) approach, the proposed ADP-based adaptive optimal control method demonstrates improved performance in the presence of parametric uncertainties (e.g., sprung mass) and unknown road displacement. Numerical simulation results of a sedan suspension system are presented to verify the effectiveness of the proposed control strategy.

Adaptive fault-tolerant control for active suspension systems based on the terminal sliding mode approach

2019 ◽  
Vol 234 (2) ◽  
pp. 501-511
Author(s):  
Amirhossein Kazemipour ◽  
Alireza B Novinzadeh
Keyword(s):  
Control Strategy ◽  
Control Method ◽  
Fault Tolerant ◽  
Sliding Mode ◽  
Fault Tolerant Control ◽  
Active Suspension ◽  
Suspension System ◽  
Terminal Sliding Mode ◽  
Car Suspension ◽  
Suspension Model

In this paper, a control system is designed for a vehicle active suspension system. In particular, a novel terminal sliding-mode-based fault-tolerant control strategy is presented for the control problem of a nonlinear quarter-car suspension model in the presence of model uncertainties, unknown external disturbances, and actuator failures. The adaptation algorithms are introduced to obviate the need for prior information of the bounds of faults in actuators and uncertainties in the model of the active suspension system. The finite-time convergence of the closed-loop system trajectories is proved by Lyapunov's stability theorem under the suggested control method. Finally, detailed simulations are presented to demonstrate the efficacy and implementation of the developed control strategy.

A New Variable Stiffness Suspension Mechanism

2011 ◽  
Author(s):  
Olugbenga M. Anubi ◽  
Carl D. Crane
Keyword(s):  
Transfer Function ◽  
Ride Comfort ◽  
Main Idea ◽  
Variable Stiffness ◽  
Suspension System ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Road Disturbance ◽  
Passive Suspension System ◽  
Suspension Performance

A new variable stiffness suspension system based on a recent variable stiffness mechanism is proposed. The overall system is composed of the traditional passive suspension system augmented with a variable stiffness mechanism. The main idea is to improve suspension performance by varying stiffness in response to road disturbance. The system is analyzed using a quarter car model. The passive case shows much better performance in ride comfort over the tradition counterpart. Analysis of the invariant equation shows that the car body acceleration transfer function magnitude can be reduced at both the tire-hop and rattle space frequencies using the lever displacement transfer function thereby resulting in a better performance over the traditional passive suspension system. An H∞ controller is designed to correct for the performance degradation in the rattle space thereby providing the best trade-off between the ride comfort, suspension deflection and road holding.

Sign in / Sign up

Export Citation Format

Share Document