scholarly journals ASSESSMENT OF MANDIBULAR 3RD MOLAR APICES TO THE INFERIOR DENTAL CANAL USING CONVENTIONAL RADIOGRAPHY AND CBCT

2021 ◽  
Vol 5 (4) ◽  
Author(s):  
Nehru Anand ◽  
M. Ashwin Chandra Veni ◽  
CL. Krithika Chndrasekar ◽  
A. Kannan Ashokan ◽  
Yasoda Aniyan
Keyword(s):  
Computed Tomography ◽  
Three Dimensional ◽  
Third Molar ◽  
Panoramic Radiograph ◽  
Conventional Radiography ◽  
High Dose ◽  
Close Proximity ◽  
Inferior Alveolar Canal ◽  
Conventional Ct ◽  
Inferior Dental Canal

Conventional radiographs provide only a 2 dimensional view of complicated three dimensional structures.  The proximity, angulations, location of impacted teeth, related to the IAN can be adequately determined using conventional 2-D periodical and panoramic radiographs. Computed tomography necessitates the administration of a high dose radiation, especially when the slice width is shortened to increased cost are the negative aspects of computed tomography compared with conventional imaging. Cone beam computed tomographies are becoming more readily available for use in maxilla facial applications. CBCT provides better image quality of teeth and their surrounding structures, compared with conventional CT and offers high spatial resolution. CBCT seems to be more accurate data about inferior alveolar canal. Hence the present study was undertaken to assess and select roots of third molar with close proximity to inferior dental canal in panoramic radiograph having radiographic signs of darkening of root, disruption of canal cortex and canal deviation and to evaluate the same roots with CBCT using trans axial and coronal sections which is angulated parallel to long axis to tooth, axial and coronal sections for proximity of inferior dental canal with the apices of third molar root. Keywords: CBCT, IAN

scholarly journals Pre-operative assessment of impacted mandibular third molar and inferior alveolar canal using orthopantomograhpy and cone beam computed tomography

2016 ◽  
Vol 9 (4) ◽  
pp. 220
Author(s):  
Mahmuda Akter ◽  
Quazi Billur Rahman ◽  
Md. Wares Uddin ◽  
Gokul Chand Kundu ◽  
Samir Banik ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Third Molar ◽  
Molar Tooth ◽  
Cone Beam ◽  
The Third ◽  
Impacted Mandibular Third Molar ◽  
Mandibular Third Molar ◽  
Close Proximity ◽  
Inferior Alveolar Canal

<p class="Abstract">The aim of this study was to assess the proximity and relation of impacted mandibular third molar and inferior alveolar canal on orthopantomogram and cone beam computed tomography (CBCT). Sixty impacted mandibular third molars having close proximity with the  inferior alveolar canal were included. CBCT images were done to determine the exact location and relationship of impacted third molar tooth and inferior alveolar canal. We assessed the radiographic signs from orthopantomogram, the course of  inferior alveolar canal and proximity to the third molar tooth in CBCT. The buccal course of  inferior alveolar canal was most frequently detected (n=36) in CBCT findings. The impacted lower third molar roots were 55% contact with the  inferior alveolar canal and 45% separate from the canal. On orthopantomogram, the following signs were strongly correlated with actual contact: Superimposed relationship between the third molar and the inferior alveolar canal. CBCT is useful as a presurgical planning in patients with impacted mandibular third molar showing close proximity to the  inferior alveolar canal.</p>

scholarly journals Applications of cone beam computed tomography in endodontics

2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Ateksha Bhardwaj Khanna
Keyword(s):  
Computed Tomography ◽  
Treatment Planning ◽  
Cone Beam Computed Tomography ◽  
Oral Surgery ◽  
Three Dimensional ◽  
Conventional Radiography ◽  
Cone Beam ◽  
Oral Radiology ◽  
Manual Search ◽  
First Choice

Abstract Background Endodontic disease can adversely affect the quality of life and therefore early diagnosis and consequent timely treatment is of paramount importance for the Endodontist. Radiology is an essential component in treatment planning, disease monitoring and assessment of treatment outcome. Periapical radiographs and panoramic radiography are frequently utilised but they provide only two-dimensional representation of three-dimensional structures. The advent of cone beam computed tomography (CBCT) offers three-dimensional accuracy of the hard tissue images with a reasonable cost and this has revolutionised imaging of the dentomaxillofacial structures. This imaging system has been seen to overcome some limitations of conventional radiography, as brought out in this review. The improvement in the accuracy is, however, accompanied at the cost of increased radiation exposure to the patient. Nevertheless, smaller areas of exposure are normally appropriate for endodontic imaging, and adjustment in the exposure parameters can further moderate the effective dose (Loubele et al. 37(6):309-18, 2008). Aims and objectives The aim of this review is to present the pertinent literature on the various applications of cone beam computed tomography in the field of endodontics. Methods Literature was electronically searched on the following sources; Medline and Keats Library. Further, a manual search was performed on the following journals: International Endodontic Journal, Journal of Endodontics, Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, Endodontology, Journal of Dental Research, European Journal of Oral Sciences & Odontology and Dentomaxillofacial Radiology. A preliminary search was performed to gain an idea of the available literature using keywords ‘Cone Beam Computed Tomography’ to view the volume of the literature evident and identify questions to be addressed in this review. The initial search showed 243 potential articles. After scrutinising the titles and abstracts of the retrieved articles, 70 relevant studies were reviewed in full text. Furthermore, ‘published guidelines on the use of CBCT’ were also searched so as to include the results as an additional source material. All the articles eligible to be included in the review were in the English language and ranged from the year 1960 to the present. Also all the studies reviewed were based on the various uses of cone beam computed tomography in the field of endodontics. The keywords used to search were ‘Cone Beam Computed Tomography (CBCT)’, ‘Conventional radiography’, ‘Applications of CBCT in endodontics’, ‘CBCT and tooth morphology’, ‘CBCT and apical periodontitis’, ‘CBCT and vertical root fractures’, ‘CBCT and resorption’, ‘CBCT and pre-surgical assessment’, ‘CBCT and dento-alveolar trauma’ and ‘CBCT and endodontic outcome’. Results Every case is unique and CBCT should be considered only after studying each case individually. CBCT imaging needs to be adopted or used where information from conventional imaging systems is either inadequate for the management of endodontic problems or inconclusive. Having said that, it is safe to state that CBCT imaging has the potential to become the first choice for endodontic treatment planning and outcome assessment, especially when new scanners with lower radiation doses and enhanced resolution would be available.

scholarly journals Diagnostic tools in maxillofacial fractures: Is there really a need of three-dimensional computed tomography?

2016 ◽  
Vol 49 (02) ◽  
pp. 225-233 ◽  
Author(s):  
Sheerin Shah ◽  
Sanjeev K. Uppal ◽  
Rajinder K. Mittal ◽  
Ramneesh Garg ◽  
Kavita Saggar
Keyword(s):  
Computed Tomography ◽  
Clinical Examination ◽  
Computed Radiography ◽  
Three Dimensional ◽  
Nasal Bone ◽  
Conventional Radiography ◽  
Diagnostic Tools ◽  
Ct Reconstruction ◽  
Management Protocol ◽  
Maxillofacial Fractures

ABSTRACTIntroduction: Because of its functional and cosmetic importance, facial injuries, especially bony fractures are clinically very significant. Missed and maltreated fractures might result in malocclusion and disfigurement of the face, thus making accurate diagnosis of the fracture very essential. In earlier times, conventional radiography along with clinical examination played a major role in diagnosis of maxillofacial fractures. However, it was noted that the overlapping nature of bones and the inability to visualise soft tissue swelling and fracture displacement, especially in face, makes radiography less reliable and useful. Computed tomography (CT), also called as X-ray computed radiography, has helped in solving this problem. This clinical study is to compare three-dimensional (3D) CT reconstruction with conventional radiography in evaluating the maxillofacial fractures preoperatively and effecting the surgical management, accordingly. Materials and Methods: Fifty patients, with suspected maxillofacial fractures on clinical examination, were subjected to conventional radiography and CT face with 3D reconstruction. The number and site of fractures in zygoma, maxilla, mandible and nose, detected by both the methods, were enumerated and compared. The final bearing of these additional fractures, on the management protocol, was analysed. Results: CT proved superior to conventional radiography in diagnosing additional number of fractures in zygoma, maxilla, mandible (subcondylar) and nasal bone. Coronal and axial images were found to be significantly more diagnostic in fracture sites such as zygomaticomaxillary complex, orbital floor, arch, lateral maxillary wall and anterior maxillary wall. Conclusion: 3D images gave an inside out picture of the actual sites of fractures. It acted as mind’s eye for pre-operative planning and intra-operative execution of surgery. Better surgical treatment could be given to 33% of the cases because of better diagnostic ability of CT.

scholarly journals Association between imaging and clinical findings in mandibular third molar surgeries

2018 ◽  
Vol 23 (1) ◽  
Author(s):  
Marcelo Bonifácio da Silva Sampieri ◽  
Danilo Da Silva Correa ◽  
Francisca Lívia Parente Viana ◽  
Thaís Sumie Nozu Imada ◽  
Josfran Da Silva Ferreira Filho ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Statistical Significance ◽  
Third Molar ◽  
Panoramic Radiograph ◽  
Mandibular Canal ◽  
Clinical Findings ◽  
Cone Beam ◽  
The Third ◽  
Close Relationship

Objective: it is important to evaluate the position andestablish the third molar relationship with the mandibularcanal to minimize the risk of nerve injury and assistin planning the extraction of this tooth. The panoramicradiograph is the standard diagnostic tool for this purpose.However, if it indicates a close relationship betweenthe third molar and the mandibular canal, furtherinvestigation using cone beam computed tomography(CBCT) may be recommended to check the three-dimensionalrelationship between the tooth and the mandibularcanal. Thus, this study aimed to correlate the clinicalfindings (observed in third molar surgeries) to imagingfindings (observed in panoramic radiographs andCBCT). Subjects and method: after the extraction of 20mandibular third molars, the panoramic radiograph andthe cone beam computed tomography were analyzed.Then, the surgical findings were correlated to the imagefindings. Results: It was observed that the radiographicfinding type 2 (darkening of roots) observed in the panoramicradiograph presented a greater relation to theabsence of cortical bone between the mandibular canaland the third molar (CBCT finding), with statistical significance(p

Three-Dimensional Imaging of the Hypopharynx and Larynx by Means of Helical (Spiral) Computed Tomography

1995 ◽  
Vol 104 (6) ◽  
pp. 425-431 ◽  
Author(s):  
Paul M. Silverman ◽  
Andrew S. Zeiberg ◽  
Thomas R. Troost ◽  
Roy B. Sessions ◽  
Robert K. Zeman
Keyword(s):  
Computed Tomography ◽  
Image Quality ◽  
Imaging Technique ◽  
Three Dimensional ◽  
Upper Airway ◽  
Spiral Ct ◽  
Airway Disease ◽  
Independent Review ◽  
Ct Technology ◽  
Conventional Ct

A new computed tomography (CT) technology, helical (spiral) CT, allows the entire neck to be imaged in only 30 seconds. Although multiplanar and three-dimensional (3-D) imaging could be performed with conventional CT, the volumetric acquisition provided by helical (spiral) CT allows significantly improved quality and easier reconstruction for more applications. These 3-D models show an airway appearance similar to that obtained with laryngography. Independent review of the 3-D images in 12 patients with lesions by two radiologists and one otolaryngologist was performed to assess 1) image quality, 2) ability to judge lesion extent, and 3) assistance in understanding the lesion compared to that provided by routine axial scans. Rating scores of 1 to 5 were assigned, with 5 representing the best quality or greatest value. The results showed that both groups scored image quality equally: 4.7. Lesion extent for the radiologists was 2.6, while the otolaryngologist's ranking was 3.7 (p < .01). In assisting understanding of lesions versus axial scans, radiologists ranked 3-D images 2.1, while the otolaryngologist ranked them 3.1 (p < .01). In summary, 3-D models provide a complementary imaging technique in understanding upper airway disease.

Sign in / Sign up

Export Citation Format

Share Document