scholarly journals Encapsulation Through The Use Of Emulsified Microemulsions

2021 ◽  
Author(s):  
Ruby R. Rafanan
Keyword(s):  
Controlled Release ◽  
Continuous Phase ◽  
Pharmaceutical Products ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Food Grade ◽  
X Ray ◽  
X Ray Scattering ◽  
Food Applications ◽  
Glycerol Monooleate

Emulsified microemulsions (EMEs), first described in detail in 2005 by the group of Garti, consist of a thermodynamically stable water-in-oil microemulsion phase (w1/o) further dispersed within an aqueous continuous phase (w2). These internally-structured w1/o/w2 dispersions are promising controlled release vehicles for water-soluble flavouring compounds, drugs and nutraceuticals. With a stable internal droplet structure, storage stability is improved over non-thermodynamically stable structured emulsions and may exhibit unique controlled release behaviour. Use of food-grade components allows for wider and safer applications in food and pharmaceutical products. In this thesis, a food-grade w1/o microemulsion consisting of glycerol monooleate, tricaprylin and water was dispersed in an aqueous (w2) phase by membrane emulsification and stabilized by a caseinate-pectin complex to produce w1/o/w2 EMEs. The resulting EME showed no signs of phase separation for weeks at room temperature. The microemulsion and EME were characterized by differential scanning calorimetry (DSC), cryo-TEM and small angle x-ray scattering (SAXS) to determine whether the microemulsion’s internal structure was maintained after emulsification. It was shown that EME droplets displayed ordering around the periphery consistent with some loss of microemulsion structure, but maintained the characteristic disordered microemulsion structure at the droplet core. Overall, this research demonstrated the feasibility of developing EME for possible applications in food and non-food applications.

scholarly journals Encapsulation Through The Use Of Emulsified Microemulsions

2021 ◽  
Author(s):  
Ruby R. Rafanan
Keyword(s):  
Controlled Release ◽  
Continuous Phase ◽  
Pharmaceutical Products ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Food Grade ◽  
X Ray ◽  
X Ray Scattering ◽  
Food Applications ◽  
Glycerol Monooleate

Emulsified microemulsions (EMEs), first described in detail in 2005 by the group of Garti, consist of a thermodynamically stable water-in-oil microemulsion phase (w1/o) further dispersed within an aqueous continuous phase (w2). These internally-structured w1/o/w2 dispersions are promising controlled release vehicles for water-soluble flavouring compounds, drugs and nutraceuticals. With a stable internal droplet structure, storage stability is improved over non-thermodynamically stable structured emulsions and may exhibit unique controlled release behaviour. Use of food-grade components allows for wider and safer applications in food and pharmaceutical products. In this thesis, a food-grade w1/o microemulsion consisting of glycerol monooleate, tricaprylin and water was dispersed in an aqueous (w2) phase by membrane emulsification and stabilized by a caseinate-pectin complex to produce w1/o/w2 EMEs. The resulting EME showed no signs of phase separation for weeks at room temperature. The microemulsion and EME were characterized by differential scanning calorimetry (DSC), cryo-TEM and small angle x-ray scattering (SAXS) to determine whether the microemulsion’s internal structure was maintained after emulsification. It was shown that EME droplets displayed ordering around the periphery consistent with some loss of microemulsion structure, but maintained the characteristic disordered microemulsion structure at the droplet core. Overall, this research demonstrated the feasibility of developing EME for possible applications in food and non-food applications.

scholarly journals Effect of tungsten disulfide nanotubes on crystallization of polylactide under uniaxial deformation and annealing

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Fausta Loffredo ◽  
Loredana Tammaro ◽  
Tiziana Di Luccio ◽  
Carmela Borriello ◽  
Fulvia Villani ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Structural Evolution ◽  
Tungsten Disulfide ◽  
Fine Tuning ◽  
Nanocomposite Films ◽  
Uniaxial Deformation ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering

AbstractTungsten disulfide (WS2) nanotubes (NTs) are examined here as a filler for polylactide (PLA) for their ability to accelerate PLA crystallization and for their promising biocompatibility in relevant to biomedical applications of PLA-WS2 nanocomposites. In this work, we have studied the structural and thermal properties of PLA-WS2 nanocomposite films varying the concentration of WS2 NTs from 0 (neat PLA) to 0.6 wt%. The films were uniaxially drawn at 90 °C and annealed at the same temperature for 3 and 10 min. Using wide angle x-ray scattering, Raman spectroscopy and differential scanning calorimetry, we probed the effects of WS2 NT addition on the structure of the PLA films at various stages of processing (unstretched, stretching, annealing). We found that 0.6 wt% of WS2 induces the same level of crystallinity in as stretched PLA-WS2 as annealing in neat PLA for 10 min. These data provide useful insights into the role of WS2 NTs on the structural evolution of PLA-WS2 composites under uniaxial deformation, and extend their applicability to situations where fine tuning of PLA crystallinity is desirable.

Preparation and Characterization of Ni2+-Montmorillonite/Polyvinyl Alcohol Water-Soluble Nanocomposite Film

2005 ◽  
Vol 13 (8) ◽  
pp. 839-846 ◽  
Author(s):  
Li-Ping Wang ◽  
Yun-Pu Wang ◽  
Fa-Ai Zhang
Keyword(s):  
Polyvinyl Alcohol ◽  
Photoelectron Spectroscopy ◽  
Thermal Characteristics ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Xps Spectra ◽  
X Ray ◽  
Alcohol Water ◽  
Ft Ir ◽  
Silicate Layers

A new type of nano-composite film was prepared from polyvinyl alcohol, Ni2+-montmorillonite (Ni2+-MMT), defoamer, a levelling agent and a plasticizer. Its thermal characteristics were studied by Differential Scanning Calorimetry (DSC). The intermolecular interactions were measured by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), and the tensile strength (TS) and elongation at break (%E) were measured. The microstructures were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). FT-IR and XPS spectra indicated that cross-linking has taken place between PVA and Ni2+-MMT. XRD and AFM indicate that the PVA molecules had inserted themselves into the silicate layers of MMT, exfoliating them and dispersing them randomly into the PVA matrix. Compared to pure PVA film, the TS of the films was increased and %E decreased when the Ni2+-Montmorillonite was added and the dissolution temperature of the film was also reduced.

Thermotropic behavior of sodium cholesteryl carbonate

2009 ◽  
Vol 24 (1) ◽  
pp. 156-163 ◽  
Author(s):  
Rabkwan Chuealee ◽  
Timothy S. Wiedmann ◽  
Teerapol Srichana
Keyword(s):  
Phase Behavior ◽  
Chemical Structure ◽  
Liquid Crystalline ◽  
Polarized Light ◽  
Wave Number ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering ◽  
C Nmr

Sodium cholesteryl carbonate ester (SCC) was synthesized, and its phase behavior was studied. The chemical structure was assessed by solid-state infrared spectroscopy based on vibration analysis. The wave number at 1705 and 1276 cm−1 corresponds to a carbonyl carbonate and O–C–O stretching of SCC, respectively. Molecular structure of SCC was further investigated with 1H and 13C NMR spectroscopy. The chemical shift, for the carbonyl carbonate resonance appeared at 155.5 ppm. A molecular mass of SCC was at m/z of 452. Differential scanning calorimetry (DSC), video-enhanced microscopy (VEM) together with polarized light microscopy, and small-angle x-ray scattering (SAXS) were used to characterize the phase behavior as a function of temperature of SCC. Liquid crystalline phase was formed with SCC. Based on the thermal properties and x-ray diffraction, it appears that SCC forms a structure analogous to the type II monolayer structure observed with cholesterol esters.

Morphological basis for the complex melting behaviour of isotactic polystyrene

e-Polymers ◽  
2002 ◽  
Vol 2 (1) ◽  
Author(s):  
Mahmoud Al-Hussein ◽  
Gert Strobl
Keyword(s):  
Morphological Changes ◽  
Melting Behaviour ◽  
Temperature Dependent ◽  
Molten Material ◽  
Scanning Calorimetry ◽  
Isotactic Polystyrene ◽  
X Ray ◽  
Long Period ◽  
X Ray Scattering ◽  
Increasing Temperature

AbstractTemperature-dependent small-angle X-ray scattering spectroscopy of isothermally cold crystallized isotactic polystyrene revealed considerable morphological reorganization during subsequent heating to the melt. Both the crystalline thickness and the long period increased continuously with increasing temperature before the samples finally melted. The temperature dependence of these changes correlated very well with the melting behaviour observed with differential scanning calorimetry. As the temperature increased during a heating scan, the initial lamellae that formed during isothermal crystallization showed only little reorganization until they started to melt. Then, the molten material recrystallized continuously into increasingly thicker lamellae at increasing temperature until they finally melted. As the crystallization temperature approached the final melting temperature of the recrystallized lamellae, the initial lamellae melted without further recrystallization and no morphological changes were seen in this case.

An instrument for time-resolved and anomalous simultaneous small- and wide-angle X-ray scattering (SWAXS) at NSRRC

2006 ◽  
Vol 39 (6) ◽  
pp. 871-877 ◽  
Author(s):  
Ying-Huang Lai ◽  
Ya-Sen Sun ◽  
U-Ser Jeng ◽  
Jhih-Min Lin ◽  
Tsang-Lang Lin ◽  
...  
Keyword(s):  
Lipid Membrane ◽  
Quantum Wires ◽  
Grazing Incidence ◽  
Anomalous Scattering ◽  
Wide Angle ◽  
Scanning Calorimetry ◽  
Time Resolved ◽  
X Ray ◽  
X Ray Scattering ◽  
Ray Scattering

A SWAXS (small- and wide-angle X-ray scattering) instrument was recently installed at the wiggler beamline BL17B3 of the National Synchrotron Radiation Research Center (NSRRC), Taiwan. The instrument, which is designed for studies of static and dynamic nanostructures and correlations between the nano (ormeso) structure (SAXS) and crystalline structure (WAXS), provides a flux of 1010–1011photon s−1at the sample at energies between 5 and 14 keV. With a SAXS area detector and a WAXS linear detector connected to two data acquisition systems operated in master–slave mode, the instrument allows one to perform time-resolved as well as anomalous scattering measurements. Data reduction algorithms have been developed for rapid processing of the large SWAXS data sets collected during time-resolved measurements. The performance of the instrument is illustrated by examples taken from different classes of ongoing projects: (i) time-resolved SAXS/WAXS/differential scanning calorimetry (DSC) with a time resolution of 10 s on a semicrystalline poly(hexamethylene terephthalate) sample, (ii) anomalous SAXS/WAXS measurements on a nanoparticulate PtRu catalyst, and (iii) grazing-incidence SAXS of a monolayer of oriented semiconductor quantum wires, and humidity-controlled ordering of Alamethicin peptides embedded in an oriented lipid membrane.

Distribution of water-soluble phthalocyanine in latex polymer according to small-angle X-ray scattering

2013 ◽  
Vol 49 (3) ◽  
pp. 280-285 ◽  
Author(s):  
T. R. Aslamazova ◽  
V. A. Kotenev ◽  
A. A. Shiryaev ◽  
A. Yu. Tsivadze
Keyword(s):  
Small Angle ◽  
Water Soluble ◽  
X Ray ◽  
X Ray Scattering ◽  
Latex Polymer ◽  
Ray Scattering
Sign in / Sign up

Export Citation Format

Share Document