Preparation and Characterization of Ni2+-Montmorillonite/Polyvinyl Alcohol Water-Soluble Nanocomposite Film

2005 ◽  
Vol 13 (8) ◽  
pp. 839-846 ◽  
Author(s):  
Li-Ping Wang ◽  
Yun-Pu Wang ◽  
Fa-Ai Zhang
Keyword(s):  
Polyvinyl Alcohol ◽  
Photoelectron Spectroscopy ◽  
Thermal Characteristics ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Xps Spectra ◽  
X Ray ◽  
Alcohol Water ◽  
Ft Ir ◽  
Silicate Layers

A new type of nano-composite film was prepared from polyvinyl alcohol, Ni2+-montmorillonite (Ni2+-MMT), defoamer, a levelling agent and a plasticizer. Its thermal characteristics were studied by Differential Scanning Calorimetry (DSC). The intermolecular interactions were measured by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), and the tensile strength (TS) and elongation at break (%E) were measured. The microstructures were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). FT-IR and XPS spectra indicated that cross-linking has taken place between PVA and Ni2+-MMT. XRD and AFM indicate that the PVA molecules had inserted themselves into the silicate layers of MMT, exfoliating them and dispersing them randomly into the PVA matrix. Compared to pure PVA film, the TS of the films was increased and %E decreased when the Ni2+-Montmorillonite was added and the dissolution temperature of the film was also reduced.

Study of the structure and thermal characteristics of nanocomposites based on polyvinyl alcohol and intercalated montmorillonite

2019 ◽  
pp. 089270571987919
Author(s):  
Volodymyr Krasinskyi ◽  
Ivan Gajdos ◽  
Oleh Suberlyak ◽  
Viktoria Antoniuk ◽  
Tomasz Jachowicz
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Acrylic Acid ◽  
Polyvinyl Alcohol ◽  
Thermal Characteristics ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
The Degree Of Crystallinity

The structure and thermal characteristics of nanocomposites based on polyvinyl alcohol (PVA) and montmorillonite (MMT) intercalated with polyvinylpyrrolidone were investigated by X-ray diffraction analysis and differential scanning calorimetry. The modification of PVA with intercalated MMT reduces the degree of crystallinity of the resulting nanocomposites but significantly increases their thermal stability. Under ultrasound, the intercalated MMT was completely distributed in a PVA solution and formed a monocrystalline structure. Films based on PVA with modified MMT were cross-linked at 110°C in the presence of 5 wt% acrylic acid and 0.5 wt% Ferrous(II) sulfate as an initiator. The formed films have a homogeneous cross-linked structure.

scholarly journals Fabrication of silane-grafted graphene oxide and its effect on the structural, thermal, mechanical, and hysteretic behavior of polyurethane

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Joo Hyung Lee ◽  
Seong Hun Kim
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Testing Machine ◽  
Hysteretic Behavior ◽  
Hexamethylene Diisocyanate ◽  
Scanning Calorimetry ◽  
Functionalized Graphene Oxide ◽  
X Ray ◽  
Ft Ir

Abstract Incorporation of nanofillers into polyurethane (PU) is a promising technique for enhancing its thermal and mechanical properties. Silane grafting has been used as a surface treatment for the functionalization of graphene oxide (GO) with numerous reactive sites dispersed on its basal plane and edge. In this study, amine-grafted GO was prepared using silanization of GO with (3-aminopropyl)triethoxysilane. The functionalized graphene oxide (fGO) was characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy. Next, it was introduced in PU fabricated using polycaprolactone diol, castor oil, and hexamethylene diisocyanate. The fGO–PU nanocomposites were in turn characterized by FT-IR, X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, and a universal testing machine. The results obtained from these analyses showed changes in structural thermal properties, as well as improved thermal stability and mechanical properties because of the strong interfacial adhesion between the fGO and the PU matrix.

Atomic layer deposition of HfO2, Al2O3, and HfAlOx using O3 and metal(diethylamino) precursors

2007 ◽  
Vol 22 (12) ◽  
pp. 3455-3464 ◽  
Author(s):  
Rajesh Katamreddy ◽  
Ronald Inman ◽  
Gregory Jursich ◽  
Axel Soulet ◽  
Christos Takoudis
Keyword(s):  
Atomic Layer Deposition ◽  
Photoelectron Spectroscopy ◽  
Thermal Characteristics ◽  
Atomic Layer ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Metal Precursors ◽  
Layer Deposition ◽  
Xrd Techniques

Tetrakis-diethylamino hafnium (TDEAH), tris-diethylamino aluminum (TDEAA), and ozone were used for the atomic layer deposition (ALD) of HfO2, Al2O3, and HfAlOx films. The ALD rates were measured to be 1.1 Å/cycle for HfO2 and 1.3 Å/cycle for Al2O3. The ALD temperature windows were found to be between 200 and 325 °C for TDEAA, and between 200 and 275 °C for TDEAH. The overlap of these ALD windows between 200 and 275 °C is critical for ALD of the composite film, HfAlOx. In addition to the overlapping ALD temperature windows, the two metal precursors have similar thermal characteristics, as shown by TGA and differential scanning calorimetry. As-deposited films and films postannealed at 600 and 800 °C films were analyzed using Fourier transformed infrared (FTIR) spectroscopy, x-ray photoelectron spectroscopy, and x-ray diffraction (XRD) techniques. FTIR spectra revealed interfacial oxide growth during deposition of both HfO2 and Al2O3 whose thickness increased with annealing temperature. The FTIR data also indicated hydroxyl and nitrate groups in the films; these species were removed after annealing in Ar at a temperature of ⩾600 °C. Both FTIR and XRD results indicated the crystallization of pure HfO2 after annealing at temperatures as low as 600 °C. On the other hand, pure Al2O3 remained amorphous after annealing at temperatures up to 800 °C. XRD data of the composite HfAlOx film show that films deposited by alternating five cycles of HfO2 and one cycle of Al2O3 remained amorphous after annealing at 600 °C. Rutherford backscattering analysis of HfAlOx deposited with a varied number of alternating HfO2 and Al2O3 cycles demonstrated a strong correlation between the cyclic dosage of TDEAA and TDEAH and the film composition.

Performances and structure changes of neat PPS fiber and nano Ti-SiO2-modified PPS fiber after over-temperature oxidation

2017 ◽  
Vol 30 (3) ◽  
pp. 328-338 ◽  
Author(s):  
Dandan Lian ◽  
Ruiping Zhang ◽  
Jianjun Lu ◽  
Jinming Dai
Keyword(s):  
Photoelectron Spectroscopy ◽  
Crystalline Form ◽  
Supramolecular Structures ◽  
Polyphenylene Sulfide ◽  
Cross Linking ◽  
Scanning Calorimetry ◽  
Temperature Oxidation ◽  
Xps Spectra ◽  
X Ray ◽  
Structure Changes

Neat polyphenylene sulfide (PPS) fiber and nano titanium-silicon dioxide-modified PPS fibers (A-PPS) were submitted to an over-temperature in air environment at 200, 220, and 240°C for 24, 192, and 360 h, respectively. Molecular and supramolecular structures were characterized by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy (XPS). The outside color of the PPS fibers turned yellow and the mechanical properties were reduced after over-temperature, but the performances of the A-PPS fibers were better than that of the neat PPS fibers. The analyses of the molecular and supramolecular structures showed that the temperatures of 200 and 220°C could not change the crystalline form but could increase the crystallinity of the PPS fibers. The crystallization temperature high-shifted and the crystallization FWHM increased after over-temperature. More significant changes at 240°C could be observed such as breaking of the macromolecular chains, mutual cross-linking, and increase of the melting enthalpy to a higher value than the complete crystallization enthalpy of PPS. Cross-linking between the benzene rings and oxidation of the S atoms did not change the PPS crystalline form but decreased the lattice constant. XPS spectra showed that the cross-linking and oxidation of the S atoms of the PPS fibers mainly came from the breaking of the C–S–C bonds, while the break ratio of the C–S–C bonds was relatively smaller in the case of the A-PPS fibers.

Grafting of TiO2 on PMMA Film and Reusability in Photodegradation of Organic Dye

2016 ◽  
Vol 99 ◽  
pp. 17-21
Author(s):  
Rachan Klaysri ◽  
Sopita Wichaidit ◽  
Piyasan Praserthdam ◽  
Okorn Mekasuwandumrong
Keyword(s):  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
Bulk Composition ◽  
Pmma Film ◽  
Glass Temperature ◽  
Scanning Calorimetry ◽  
X Ray ◽  
H Nmr ◽  
Ft Ir ◽  
Novel Method

Grafting TiO2 on PMMA was studied by atom-transfer radical-polymerization (ATRP). Each step in grafting process was monitored by fourier transform infrared spectroscopy (FT-IR), 1H NMR and 13C NMR spectra. The glass temperature of grafted-PMMA film was determined by using differential scanning calorimetry (DSC). The morphology and bulk composition were characterized by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX). The surface composition was characterized by X-ray photoelectron spectroscopy (XPS). As results, a novel method of grafting TiO2 on PMMA was successfully grafted and confirmed in various techniques. The photocatlytic activity was evaluated under UV and visible light irradiation. The reusability of TiO2-g-PMMA films was studied in details.

Mechano-Chemical Modification of Nanodiamond with GW

2008 ◽  
Vol 375-376 ◽  
pp. 87-91
Author(s):  
Yong Wei Zhu ◽  
Xiang Yang Xu ◽  
Bai Chun Wang ◽  
Jian Liang Shen
Keyword(s):  
Fourier Transform ◽  
Chemical Modification ◽  
Photoelectron Spectroscopy ◽  
Silane Coupling Agent ◽  
Xps Spectra ◽  
X Ray ◽  
Silane Coupling ◽  
Before And After ◽  
New Type ◽  
Ft Ir

Mechano-chemical modification (MCM) of nanodiamond was conducted with a stirring mill. A new type of silane coupling agent, GW was chosen as its modifier. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) were employed to study the surface properties of nanodiamond before and after treatments. Results showed that the peaks related to GW and the ball (for example, Fe, Si and Cl) appeared obviously after its MCM on their XPS spectra and mostly disappeared after its further purification with acid X or Y. A new peak located at 1382.48cm-1 was very strong after further purification. It was proven by their FT-IR spectra.

scholarly journals Preparation of LiFePO4/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2251 ◽  
Author(s):  
Rongyue Liu ◽  
Jianjun Chen ◽  
Zhiwen Li ◽  
Qing Ding ◽  
Xiaoshuai An ◽  
...  
Keyword(s):  
Cathode Materials ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Lithium Ion ◽  
Lithium Carbonate ◽  
Electrochemical Performances ◽  
Scanning Calorimetry ◽  
Xps Spectra ◽  
X Ray ◽  
Exhaust Purification

In this work, LiFePO4/C composite were synthesized via a green route by using Iron (III) oxide (Fe2O3) nanoparticles, Lithium carbonate (Li2CO3), glucose powder and phosphoric acid (H3PO4) solution as raw materials. The reaction principles for the synthesis of LiFePO4/C composite were analyzed, suggesting that almost no wastewater and air polluted gases are discharged into the environment. The morphological, structural and compositional properties of the LiFePO4/C composite were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), Raman and X-ray photoelectron spectroscopy (XPS) spectra coupled with thermogravimetry/Differential scanning calorimetry (TG/DSC) thermal analysis in detail. Lithium-ion batteries using such LiFePO4/C composite as cathode materials, where the loading level is 2.2 mg/cm2, exhibited excellent electrochemical performances, with a discharge capability of 161 mA h/g at 0.1 C, 119 mA h/g at 10 C and 93 mA h/g at 20 C, and a cycling stability with 98.0% capacity retention at 1 C after 100 cycles and 95.1% at 5 C after 200 cycles. These results provide a valuable approach to reduce the manufacturing costs of LiFePO4/C cathode materials due to the reduced process for the polluted exhaust purification and wastewater treatment.

Thermal Behaviour of Candesartan Active substance and in pharmaceutical compounds

2017 ◽  
Vol 68 (8) ◽  
pp. 1895-1902
Author(s):  
Ioana Cristina Tita ◽  
Eleonora Marian ◽  
Bogdan Tita ◽  
Claudia Crina Toma ◽  
Laura Vicas
Keyword(s):  
Thermal Behaviour ◽  
Active Substance ◽  
Pharmaceutical Research ◽  
Pharmaceutical Product ◽  
Nitrogen Atmosphere ◽  
Pure Substance ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir

Thermal analysis is one of the most frequently used instrumental techniques in the pharmaceutical research, for the thermal characterization of different materials from solids to semi-solids, which are of pharmaceutical relevance. In this paper, simultaneous thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC) were used for characterization of the thermal behaviour of candesartan cilexetil � active substance (C-AS) under dynamic nitrogen atmosphere and nonisothermal conditions, in comparison with pharmaceutical product containing the corresponding active substance. It was observed that the commercial samples showed a different thermal profile than the standard sample, caused by the presence of excipients in the pharmaceutical product and to possible interaction of these with the active substance. The Fourier transformed infrared spectroscopy (FT-IR) and X-ray powder diffraction (XRPD) were used as complementary techniques adequately implement and assist in interpretation of the thermal results. The main conclusion of this comparative study was that the TG/DTG and DSC curves, together with the FT-IR spectra, respectively X-ray difractograms constitute believe data for the discrimination between the pure substance and pharmaceutical forms.

scholarly journals Optical, XPS and XRD Studies of Semiconducting Copper Sulfide Layers on a Polyamide Film

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Valentina Krylova ◽  
Mindaugas Andrulevičius
Keyword(s):  
Photoelectron Spectroscopy ◽  
Copper Sulfide ◽  
Diffusion Method ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Xrd Studies ◽  
Polyamide Film ◽  
Indirect Band Gap ◽  
Xrd Method

Copper sulfide layers were formed on polyamide PA 6 surface using the sorption-diffusion method. Polymer samples were immersed for 4 and 5 h in 0.15 mol⋅  solutions and acidified with HCl (0.1 mol⋅) at . After washing and drying, the samples were treated with Cu(I) salt solution. The samples were studied by UV/VIS, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) methods. All methods confirmed that on the surface of the polyamide film a layer of copper sulfide was formed. The copper sulfide layers are indirect band-gap semiconductors. The values of are 1.25 and 1.3 eV for 4 h and 5 h sulfured PA 6 respectively. Copper XPS spectra analyses showed Cu(I) bonds only in deeper layers of the formed film, while in sulfur XPS S 2p spectra dominating sulfide bonds were found after cleaning the surface with ions. It has been established by the XRD method that, beside , the layer contains as well. For PA 6 initially sulfured 4 h, grain size forchalcocite, , was  nm and fordjurleite, , it was 54.17 nm. The sheet resistance of the obtained layer varies from 6300 to 102 .

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

Sign in / Sign up

Export Citation Format

Share Document